In the current study 28 day strength of Recycled Aggregate Concrete (RAC) and Fly ash (class F) based concrete is predicted using Artificial Neural Network (ANN), Mul-tigene Genetic Programming (MGGP) and Model Tree (MT). Four sets of models were designed for per cubic proportions of materials, Properties of materials and non-di-mensional parameters as input parameters. The study shows that the predicted 28 day strength is in good agreement with the observed data and also generalize well to untrained data. ANN outperforms MGGP and MT in terms of model performance. Out-put of the developed models can be presented in terms of trained weights and biases in ANN, equations in MGGP and in the form of series of equations in MT. ANN, MGGP and MT can grasp the influence of input parameters which can be seen through Hinton diagrams in ANN, input frequency distribution in MGGP and coefficients of input pa-rameters in MT. The study shows that these data driven techniques can be used for developing model/s to predict strength of concrete with an acceptable performance.
Adnan SH, Rahman I.A, Saman HM (2011). Recycled aggregate as coarse aggregate replacement in concrete mixes. ASEAN Australian Engineering Congress 2011, Kuching, Sarawak, Malaysia, 2011.
Adriana TAD, Monica BL, Koji de JN (2013). Prediction of compressive strength of concrete containing construction and demolition waste using artificial neural networks. Construction and Building materi-als, 38, 717-722.
Agarwal SD, Karnnkal AB, Patil PN (2011). Feasibility study of use of RCA in concrete. International Journal of Research in Engineering Sciences and Technology, SP-II, 70-75.
Ahmet OZ, Murat PB, Erdogan O, Erdog K, Naci C, Bhatti A (2006). Pre-dicting the compressive strength and slump of high strength con-crete using neural network. Construction and Building Materials, 20, 769–775.
Bayazidi BM, Wang GG, Amir H, Alavi H, Gandomi AH (2014). Multigene genetic programming for estimation of elastic modulus of concrete. Mathematical Problems in Engineering, 2014, 1-10.
ChakradharaRao M, Bhattacharyya SK, Barai SV (2010). Influence of field recycled coarse aggregate on properties of concrete, Materials and Structures, 44(1), 205-220.
Corinaldesi V (2010). Mechanical and elastic behavior of concretes made of recycled-concrete coarse aggregates. Construction and Building Materials, 24, 1616–1620.
Dapena E, Alaejos P, Lobet A, Pérez D (2011). Effect of recycled sand content on characteristics of mortars and concretes. Journal of Ma-terials in Civil Engineering, 23(4), 414-422.
David RL, Gregory JJr (1999). Evaluating the use of “goodness of fit” measures in hydrological and hydro climatic model validation. Wa-ter Resources Research, 35(1), 233-241.
Deepa C, SathiyaKumari K, Sudha KP (2010). Prediction of the com-pressive strength of high performance concrete mix using tree based modeling. International Journal of Computer Applications, 6(5), 18–24.
Deshpande N (2016). Study of Properties of Concrete Made with Recy-cled Aggregate and Industrial Wastes with Special Application to Housing. Ph.D thesis, Shivaji University.
Deshpande N, Londhe SN, Kulkarni SS (2014). Modeling compressive strength of recycled aggregate concrete by Artificial Neural Net-work, Model Tree and Non-linear Regression. International Journal of Sustainable Built Environment, 3, 187–198.
Dias WPS, Pooliyadda SP. (2001). Neural networks for predicting prop-erties of concretes with admixtures. Construction and Building Ma-terials, 15, 371-379.
Domingo-Cabo A, Lázaro C, López-Gayarre C, Serrano-López MA, Serna P, Castaño-Tabares JO (2009). Creep and shrinkage of recycled ag-gregate concrete. Construction and Building Materials, 23, 2545–2553.
Duan ZH, Kou SC, Poon CS. (2013). Prediction of compressive strength of recycled aggregate concrete using artificial neural networks. Construction and Building Materials, 40, 1200–1206.
Evangelista L, Brito JCde (2010). Durability performance of concrete made with fine recycled concrete aggregates. Cement & Concrete Composites, 32, 9–14.
Evangelista LR, Brito JCde (2004). Criteria for the use of fine recycled concrete aggregates in concrete production. International RILEM Conference on Use of Recycled Building Materials in Building and Structures, 8-11 Nov 2004, Barcelona, Spain.
Fathifazl G, Abbas A, Razaqpur AG, Isgor OB, Fournier B, Foo S (2009). New mixture proportioning method for concrete made with coarse recycled concrete aggregate. Journal of Materials in Civil Engineer-ing, 21(10), 601-611.
Frank E, Mark A, Hall Ian, Witten H (2016). The WEKA Workbench. Fourth Edition. Online Appendix for Data Mining: Practical Machine Learning Tools and Techniques. Morgan Kaufmann.
Goncalves A, Esteves A, Vieria M (2004). Influence of recycled concrete aggregates on concrete durability. International RILEM Conference on Use of Recycled Building Materials in Building and Structures, 8-11 Nov 2004, Barcelona, Spain.
Gorphade VH, Sudarsana Rao H, Beulah M (2014). Development of ge-netic algorithm based neural network model for predicting worka-bility and strength of high performance concrete. International Journal of Inventive Engineering and Sciences (IJIES), 2(6), 1-8.
Gupta R, Kewalramani MA, Goel A (2004). Prediction of concrete strength using neural-expert system. Journal of Materials in Civil En-gineering, 18(3), 462-466.
Hansen TC, Narud H (1983). Strength of recycled concrete made from crushed concrete coarse aggregate. Concrete des Constr, 5(1), 79-83.
I-Cheng Y (2007). Modeling slump flow of concrete using second-order regressions and artificial neural networks. Cement & Concrete Com-posites, 29, 474–480.
Jain A, KumarJha S, Misra S (2008). Modeling and Analysis of concrete slump using Artificial Neural Networks. Journal of materials in Civil engineering, 20(9), 628-633.
Jong-In KM, Kim DK, Maria MQ, Feng M, Yazdani F (2004). Application of Neural Networks for Estimation of Concrete Strength. Journal of Materials in Civil Engineering, May/June 2004, 257-264.
Khatib JM (2005). Properties of concrete incorporating fine recycled aggregate. Cement Concrete Research, 35(4), 763-769.
Konin A, Kouadio DM (2011). Influence of cement content on Recycled aggregates concrete properties. Modern Applied Science, 5(1), 23-31.
Kotrayothar D (2012). Recycled Aggregate Concrete for Structural Ap-plications. Ph.D thesis, University of Western Sydney.
Kou S (2006). Reusing Recycled Aggregates in Structural Concrete. Ph.D thesis, Hong Kong Polytechnic University.
Kumutha R, Vijai K (2010). Strength of concrete incorporating aggre-gates recycled from demolition waste. ARPN Journal of Engineering and Applied Sciences, 5(5). 64-71.
Londhe SN (2008). Soft computing approach for real-time estimation of missing wave heights. Ocean Engineering, 35, 1080–1089.
Londhe SN, Dixit PR (2012). Genetic Programming: A Novel Computing Approach in Modeling Water Flows Genetic Programming – New Approaches and Successful Applications. Chapter 9, InTech.
Maier H, Dandy G (2000). Neural networks for the prediction and fore-casting of water resources variables: a review of modelling issues and applications. Environmental Modeling & Software, 15(1), 101-124.
Neville AM (2012). Properties of Concrete. Pearson Education, USA and UK.
Ni HG, Wang JZ (2000). Prediction of compressive strength of concrete by neural networks. Cement and Concrete Research, 30, 1245-1250.
Nikoo M, Torabian Moghadam F, Sadowski A (2015). Prediction of con-crete compressive strength by evolutionary artificial neural net-works. Advances in Materials Science and Engineering, 2015, 1-8.
Padmini AK, Ramamurthy K, Matthews MS (2003). Relative moisture movement through recycled aggregate concrete. Cement and Con-crete Research, 54(5), 377-384.
Pandey DS, Pan I, Das S, Leahy JJ, Kwapinski W (2015). Multi-gene ge-netic programming based predictive models for municipal solid waste gasification in a fluidized bed gasifier. Bioresource Technol-ogy, 179, 524–533.
Pelufo M J, Domingo A, Ulloa VA, Vergara NN (2009). Analysis of mois-ture state of recycled coarse aggregate and its influence on com-pression strength of the concrete. Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2009, Valencia Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, 28 September–2 October 2009, Uni-versidad Politecnica de Valencia, Spain
Pereira P, Evangelista L, Brito Jde (2012). The effect of superplasticis-ers on the workability and compressive strength of concrete made with fine recycled concrete aggregates. Construction and Building Materials, 28, 722–729.
Poon CS, Kou SC, Lam L (2007). Influence of recycled aggregate on slump and bleeding of fresh concrete. Materials and Structures, 40, 981–988.
Poon CS, Shui ZH, Lam L, Fok H, Kou SC (2004). Influence of moisture states of natural and recycled aggregates on the slump and com-pressive strength of concrete. Cement and Concrete Research, 34, 31–36.
Quinlan JR (1992). Learning with Continuous Classes. In: Adams and Sterling, (Eds.). Proceedings of 5th Australian Joint Conference on Ar-tificial Intelligence. World Scientific, Singapore.
Ryu JS (2002). An experimental study on the effect of recycled aggre-gate on concrete properties. Magazine of Concrete Research, 54(1), 7-12.
Sarıdemir M (2010). Genetic programming approach for prediction of compressive strength of concretes containing rice husk ash. Con-struction and Building Materials, 24, 1911–1919.
Schoppe BM (2011). Shrinkage and modulus of elasticity in concrete with recycled aggregates. M.Sc. thesis, California Polytechnic State University.
Searson DP (2015). GPTIPS 2: an open-source software platform for symbolic data mining. Chapter 22 in Handbook of Genetic Program-ming Applications, A.H. Gandomi et al., (Eds.), Springer, New York, NY.
Searson DP, Leahy DE, Willis MJ (2010). GPTIPS: An open source ge-netic programming toolbox for multigene symbolic regression. Pro-ceedings of the International Multi Conference of Engineers and Com-puter Scientists 2010, I, IMECS 2010, March 17-19, 2010, Hong Kong.
Searson DP, Willis MJ, Montague GA (2007). Co-evolution of non-linear PLS model components. Journal of Chemometrics, 2, 592-603.
Searson PD (2015). GPTIPS 2: An open-source software platform for symbolic data mining. Cornell University Library. DOI: arXiv:1412.4690
Shetty MS (2005). Concrete Technology. 17th edition. S. Chand and Company, New Delhi.
Singh HK (2014). Prediction of shear strength of deep beam using Ge-netic Programming. B.Tech thesis, National Institute of Technology, Rourkela, India.
The ASCE Task Committee (2000). Artificial Neural Networks in Hy-drology I: Preliminary concepts. Journal of Hydrologic Engineering, 5(2), 115-123.
Yaprak H, Aruntas HY, Demir I, Simsek O, Durmus G (2011). Effects of the fine recycled concrete aggregates on the concrete properties. International Journal of the Physical Science, 6(10), 2455-2461.
Yong PC, Teo DCL (2009). Utilization of Recycled aggregate as coarse aggregate in concrete. UNIMAS-E Journal of Civil Engineering, 1(1), 1-6.
Yueh TY, Chen YY, Hwang CL (2006). Properties of HPC with recycled aggregates. Cement and Concrete research, 36, 943-950.
Zega CJ, Di Maio AA (2003). Recycled concrete made with different nat-ural coarse aggregates exposed to high temperature. Construction and Building Materials, 23, 2047–2052.