Volkan Eskizeybek, Ahmet Avcı, Tugay Üstün

Selectively Nanocube Formation of Tungsten Oxide (WO3)

Metal oxide nanoparticles with tunable size and shape are of significant interest since these features allowtailoring their performance, functionality, and efficiency. Doping of metal oxide nanoparticles with metalcations proved to be an effective strategy for tailoring their electrical, optical, and microstructuralproperties. In this study, tungsten oxide (WO3) nanoparticles doped with selenium (Se) and lanthanum(La) catalysts were produced with a preferential nanocube morphology by arc discharge method. Se andLa catalysts were introduced into the tungsten (W) electrode acting as an anode, and the arc-discharge wasgenerated between two W electrodes in a deionized water medium. Structural and morphological featuresof the as-synthesized nanostructures were investigated by performing scanning electron microscopy(SEM) and transmission electron microscopy (TEM) analyses. Morphological analyses revealed that theresultant nanoparticles exhibited nanocube morphology with size ranges of 10 to 50 nm. X-ray diffraction(XRD) results proved the existence of highly crystalline monoclinic WO3 as an abundant structure. Weconfidently believe that the arc-discharge method can be utilized to produce various types ofnanostructures with tunable size and shape by tailoring process parameters, including the type of dopant.

PDF

___

[1]. Supothina, S, Seeharaj, P, Yoriya, S, Sriyudthsak, M. 2007. Synthesis of tungsten oxide nanoparticles by acid precipitation method. Ceramics International; 33(6): 931-936.
[2]. Anithaa, AC, Lavanya, N, Asokan, K, Sekar, C. 2015. WO3 nanoparticles based direct electrochemical dopamine sensor in the presence of ascorbic acid. Electrochimica Acta; 167: 294- 302.
[3]. Yan, H, Zhang, X, Zhou, S, Xie, X, Luo, Y, Yu, Y. 2011. Synthesis of WO 3 nanoparticles for photocatalytic O 2 evolution by thermal decomposition of ammonium tungstate loading on gC 3 N 4. Journal of Alloys and Compounds; 509(24): L232-L235.
[4]. Bamwenda, GR, Arakawa, H. 2001. The visible light induced photocatalytic activity of tungsten trioxide powders. Applied Catalysis A: General; 210(1): 181-191.
[5]. Villa, K, Murcia-López, S, Morante, JR, Andreu, T. 2016. An insight on the role of La in mesoporous WO 3 for the photocatalytic conversion of methane into methanol. Applied Catalysis B: Environmental; 187: 30-36.
[6]. Gu, Z, Li, H, Zhai, T, Yang, W, Xia, Y, Ma, Y, Yao, J. 2007. Large-scale synthesis of single-crystal hexagonal tungsten trioxide nanowires and electrochemical lithium intercalation into the nanocrystals. Journal of Solid State Chemistry; 180(1): 98-105.
[7]. Wang, J, Khoo, E, Lee, PS, Ma, J. 2008. Synthesis, assembly, and electrochromic properties of uniform crystalline WO3 nanorods. The Journal of Physical Chemistry C; 112(37): 14306-14312.
[8]. Supothina, S, Seeharaj, P, Yoriya, S, Sriyudthsak, M. 2007. Synthesis of tungsten oxide nanoparticles by acid precipitation method. Ceramics International; 33(6): 931-936.
[9]. Li, Y, Bando, Y, Golberg, D. 2003. Quasi‐Aligned Single‐ Crystalline W18O49 Nanotubes and Nanowires. Advanced Materials; 15(15): 1294-1296.
[10]. Bai, X, Ji, H, Gao, P, Zhang, Y, Sun, X. 2014. Morphology, phase structure and acetone sensitive properties of copperdoped tungsten oxide sensors. Sensors and Actuators B: Chemical; 193: 100-106.
[11]. Upadhyay, SB, Mishra, RK, Sahay, PP. 2014. Structural and alcohol response characteristics of Sn-doped WO 3 nanosheets. Sensors and Actuators B: Chemical; 193: 19-27.
[12]. Abhudhahir, MHS, Kandasamy, J. 2015. Photocatalytic effect of manganese doped WO3 and the effect of dopants on degradation of methylene blue. Journal of Materials Science: Materials in Electronics; 26(11): 8307-8314.
[13]. Li, J, Cheng, J, Wei, B, Zhang, M, Luo, L, Wu, Y. 2017. Microstructure and properties of La 2 O 3 doped W composites prepared by a wet chemical process. International Journal of Refractory Metals and Hard Materials; 66: 226-233.
[14]. Abbas, M, Takahashi, M, Kim, C. 2013. Facile sonochemical synthesis of high-moment magnetite (Fe3O4) nanocube. Journal of nanoparticle research; 15(1): 1354.
[15]. O’Kelly, C, Jung, SJ, Bell, AP, Boland, JJ. 2012. Single crystal iron nanocube synthesis via the surface energy driven growth method. Nanotechnology; 23(43): 435604.
[16]. Sibu, CP, Kumar, SR, Mukundan, P, Warrier, KGK. 2002. Structural modifications and associated properties of lanthanum oxide doped sol−gel nanosized titanium oxide. Chemistry of Materials; 14(7): 2876-2881.
[17]. Jin, Z, Nie, H, Yang, Z, Zhang, J, Liu, Z, Xu, X, Huang, S. 2012. Metal-free selenium doped carbon nanotube/graphene networks as a synergistically improved cathode catalyst for oxygen reduction reaction. Nanoscale; 4(20): 6455-6460.
[18]. Derk, AR, Li, B, Sharma, S, Moore, GM, McFarland, EW, Metiu, H. 2013. Methane oxidation by lanthanum oxide doped with Cu, Zn, Mg, Fe, Nb, Ti, Zr, or Ta: the connection between the activation energy and the energy of oxygen-vacancy formation. Catalysis letters; 143(5): 406-410.
[19]. Hong, SJ, Jun, H, Borse, PH, Lee, JS. 2009. Size effects of WO 3 nanocrystals for photooxidation of water in particulate suspension and photoelectrochemical film systems. International Journal of Hydrogen Energy; 34(8): 3234-3242.
[20]. Gondal, MA, Dastageer, MA, Khalil, A. 2009. Synthesis of nano-WO 3 and its catalytic activity for enhanced antimicrobial process for water purification using laser induced photocatalysis. Catalysis Communications; 11(3): 214-219.
[21]. Ospina, R, Castillo, HA, Benavides, V, Restrepo, E, Arango, YC, Arias, DF, Devia, A. 2006. Influence of the annealing temperature on a crystal phase of W/WC bilayers grown by pulsed arc discharge. Vacuum; 81(3): 373-377.
[22]. Eskizeybek, V, Avcı, A, Chhowalla, M. 2011. Structural and optical properties of CdO nanowires synthesized from Cd (OH) 2 precursors by calcination. Crystal Research and Technology; 46(10): 1093-1100.
[23]. Qiu, G, Dharmarathna, S, Zhang, Y, Opembe, N, Huang, H, Suib, SL. 2011. Facile microwave-assisted hydrothermal synthesis of CuO nanomaterials and their catalytic and electrochemical properties. The Journal of Physical Chemistry C; 116(1): 468-477.
[24]. Krätschmer, W, Lamb, LD, Fostiropoulos, K, Huffman, DR. 1990. Solid C60: a new form of carbon. Nature; 347(6291): 354-358.
[25]. Ashkarran, AA, Mahdavi, SM, Ahadian, MM. 2010. Photocatalytic activity of ZnO nanoparticles prepared via submerged arc discharge method. Applied Physics A; 100(4): 1097-1102.
[26]. Fang, F, Futter, J, Markwitz, A, Kennedy, J. 2009. UV and humidity sensing properties of ZnO nanorods prepared by the arc discharge method. Nanotechnology; 20(24): 245502.
[27]. Wang, L, Hu, H, Xu, J, Zhu, S, Ding, A, Deng, C. 2019. WO3 nanocubes: Hydrothermal synthesis, growth mechanism, and photocatalytic performance. Journal of Materials Research; 34(17): 2955-2963.
[28]. Guery, C, Choquet, C, Dujeancourt, F, Tarascon, JM, Lassegues, JC. 1997. Infrared and X-ray studies of hydrogen intercalation in different tungsten trioxides and tungsten trioxide hydrates. Journal of Solid State Electrochemistry; 1(3): 199-207.
[29]. Mao, L, Liu, C. 2008. A new route for synthesizing VO 2 (B) nanoribbons and 1D vanadium-based nanostructures. Materials Research Bulletin; 43(6): 1384-1392.