İzopropanol katkılı Poli (3,4-etilen dioksitiyofen): poli (stirensülfonat) 'ın organik ışık yayan diyotların emisyon özellikleri üzerindeki etkisi

Pozitif yük taşıyıcılar (boşluk) enjekte eden tabaka olarak kullanılan izopropanol (IPA) katkılı Poli (3,4-etilen dioksitiyofen): poli (stirensülfonat) (PEDOT: PSS) içeren polimer bazlı organik ışık yayan cihazların (OLED) performans araştırılmıştır. Bu çalışmada, PEDOT:PSS ince filmlerindeki morfolojik değişiklikler atomik kuvvet mikroskopisi (AFM) ile analiz edilmiştir. Katkılı PEDOT:PSS ile OLED aygıt performansı sonuçları katkısız PEDOT:PSS OLED aygıtı ile karşılaştırılmıştır. Konsantrasyon 1: 1 (PEDOT: PSS - IPA) ile üretilen OLED aygıt, neredeyse 8000 cd / m2 parlaklık ve 1.75 cd / A verimliliği ile diğerleri arasında en iyi performansı göstermiştir. Ek olarak, literatürde önerilen IPA doping mekanizmalarının etkisi araştırılmıştır.

Effect of isopropanol doped Poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) on emission characteristics of organic light emitting diodes

The performance of polymer based organic light-emitting devices (OLEDs) that contained isopropanol (IPA) doped poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) utilized as positive charge carriers (hole) injecting electrode were investigated. In this study, morphological changes in PEDOT:PSS thin films have been analyzed with atomic force microscopy (AFM). The results of device performance with doped PEDOT:PSS were compared with the result of non doped PEDOT:PSS device. Fabricated OLED with the concentration 1:1 (PEDOT:PSS to IPA) shows the best performance among the others with almost 8000 cd/m2 brightness and 1.75 cd/A efficiency. Additionally, effect of IPA doping mechanisms proposed in the literature have been surveyed.

Keywords:

Organic light emitting diodes, PEDOT:PSS, hole injection layer IPA,

PDF

___

[1] Elschner, A., Kirchmeyer, S., Lövenich, W., Merker, U., Reuter, K., PEDOT: Principles and Applications of an Intrinsically Con-ductive Polymer, CRC Press: Boca Raton, FL, USA, (2010)
[2] Jonas, F., Heywang, G., Werner, S., Novel Polythiophenes, Process for Their Preparation, and Their Use, Patent DE 3813589A1, (1988).
[3] Heywang, G., Jonas, F., Poly(alkylenedioxythiophene)s-new, very stable conducting polymers, Advanced Materials, 4, 116-118, (1992).
[4] Randriamahazaka, H., Noel, V., Chevrot, C., Nucleation and growth of poly(3,4- ethylenedioxythiophene) in acetonitrile on platinum under potentiostatic conditions, Journal of Electroanalytical Chemistry, 472, 103–111, (1999).
[5] Cao, Y., Yu, G., Zhang, C., Menon, R., Heeger, A.J., Polymer light-emitting diodes with polyethylene dioxythiophene-polystyrene sulfonate as the transparent anode, Synthetic Metals, 87,171-174, (1997).
[6] Scott, J.C., Carter, S.A., Karg, S., Angelopoulos, M., Polymeric anodes for organic light-emitting diodes, Synthetic Metals, 85, 1197-1200, (1997).
[7] Burn, P.L., Bradley, D.D.C., Brown, A.R., Friend, R.H., Halliday, D.A, Holmes, A.B., Kraft, A., Martens, J.H.F., Control of Electronic and Physical Structure Through Modification of the Synthesis and Processing in Precursor-Route Poly(arylene vinylene) Polymers, Springer, Series in Solid State Sciences, Electronic Properties of Polymers 107, 293, (1992).
[8] Bradley, D.D.C., Burn, P.L., Friend, R.H., Holmes, A.B., Kraft, A., Electronic Properties of Conjugated Polymers, IV. Springer Series in Solid State Sciences, 107, 304, (1992).
[9] Kugler, T., Salaneck, W.R., Rost, H., Holmes, A.B., Polymer band alignment at the interface with indium tin oxide: consequences for light emitting devices, Chemical Physics Letters, 310, 391-396, (1999).
[10] Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., Reynolds, J. R., Poly(3,4‐ethylenedioxythiophene) and its Derivatives: Past, Present, and Future, Advanced Materials, 12, 481, (2000).
[11] Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., F. Isikgor, H., Ouyang, J., Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices, Journal of Materials Science: Materials in Electronics, 26,4438-4462, (2015).
[12] Pettersson, L. A. A., Ghosh, S., Inganas, O., Optical anisotropy in thin films of poly (3, 4-ethylenedioxythiophene)- poly (4-styrenesulfonate), Organic Electronics, 3, 143-148, (2002).
[13] Ghosh, S., Inganas, O., Nano-structured conducting polymer network based on PEDOT-PSS, Synthetic Metals, 121, 1321-1322, (2001).
[14] Zhang, F., Johansson, M., Andersson, M. R., Hummelen, J. C., Inganas, O., Polymer photovoltaic cells with conducting polymer anodes, Advanced Materials, 14, 662-665, (2002).
[15] Kim, J. Y., Jung, J. H., Lee, D. E., Joo, J., Enhancement of electrical conductivity of poly (3,4-ethylenedioxythiophene) / poly(4-styrenesulfonate) by a change of solvents, Synthetic Metals, 126, 311-316, (2002).
[16] Lee, C.S., Kim, J.Y., Lee, D. E., Koo, Y.K., Joo, J., Han, S., Beag, Y. W., Koh, S.K., Organic based flexible speaker through enhanced conductivity of PEDOT/PSS with various solvents, Synthetic Metals, 135, 13-14, (2003).
[17] Jonsson, S. K. M., Birgerson, J., Crispin, X., Greczynski, G., Osikowicz, W., vander Gon, A. W. D., Salaneck, W. R., Fahlman, M., The effects of solvents on the morphology and sheet resistance in poly(3,4‐ethylenedioxythiophene)– polystyrenesulfonic acid (PEDOT - PSS) films, Synthetic Metals, 139, 1- 10, (2003).
[18] Kim, W. H., Makinen, A. J., Nikolov, N., Shashidhar, R., Kim, H., Kafafi, Z. H., Molecular organic light-emitting diodes using highly conducting polymers as anodes, Applied Physics Letters, 80, 3844–3846, (2002).
[19] Ha, Y.-H., Nikolov, N., Pollack, S.K., Mastrangelo, J., Martin, B. D., Shashidhar, R., Towards a Transparent, Highly Conductive Poly(3,4‐ethylenedioxythiophene), Advanced Functional Materials, 14, 615– 622,(2004).
[20] Luo, J., Billep, D., Waechtler, T., Otto, T., Toader, M., Gordan, O., Sheremet, E., Martin, J., Hietschold, M., Zahn, D. R., Enhancement of the thermoelectric properties of PEDOT: PSS thin films by post-treatment, Journal of Materials Chemistry A, 1 7576-7583, (2013).
[21] Allcock, H. R., Lampe, F. W., Contemporary Polymer Chemistry, Prentice Hall: EnglewoodCliffs, NJ, 2nd ed., 553, (1990).
[22] Gelbard, G., Organic Synthesis by Catalysis with Ion-Exchange Resins, Industrial & Engineering Chemistry Research, 44, 8468-8498, (2005).
[23] Sharma, M. M., Some novel aspects of cationic ion-exchange resins as catalysts, Reactive and Functional Polymers, 26,3, (1995).
[24] Akelah, A., The use of functionalized polymers as polymeric reagents in solid phase organic synthesis: A review, Reactive Polymers, Ion Exchangers, Sorbents, 8, 273-284, (1988).
[25] Czarnik, A. W., DeWitt, S. H., A Practical Guide to Combinatorial Chemistry, Eds. American Chemical Society: Washington, DC, (1997).
[26] Chaiken, I. N., Janda, K. D. , Molecular Diversity and Combinatorial Chemistry Libraries and Drug Discovery, Eds.; American Chemical Society:Washington, DC, 1996.
[27] Balkenhol, F., vondem Bussche-Hünnefeld, C., Lansky, A., Zechel, C., Combinatorial Synthesis of Small Organic Molecules, Angewandte Chemie International Edition, 35, 2289, (1996).
[28] Thompson, L. A., Ellman, J. A., Synthesis and Applications of Small Molecule Libraries, Chemical Reviews, 96, 555-600, (1996).
[29] Pavia, M. R., Sawyer, T. K., Moos, W. H., Bioorg Med Chem Lett, 3, 387-396, (1993).
[30] D’angelo, J. G., Sawyer, R., Kumar, A., Onorato, A., Mccluskey, C., Delude, C., Vollenweider, L., Reyes, N., French, R., Warner, S., Chou, J., Stenzel, J., Sotzing, G. A., Smith, M. B., Chemical Reactions of the Conducting Polymer Poly(3,4-ethylene dioxythiophene) and Alcohols, Journal of Polymer Science: Part A: Polymer Chemistry, 45, 2328-2333, (2007).
[31] De Girolamo, Del Mauro, A., Nenna, G., Villani, F., Minarini, C., Study of the effect of the doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) polymeric anode on the organic light-emitting diode performances, Thin Solid Films, 520, 5386-539, (2012).
[32] Fallahzadeh, A., Saghaei, J., Yousefi, M. H., Effect of alcohol vapor treatment on electrical and optical properties of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for indium tin oxide-free organic light-emitting diodes, Applied Surface Science, 320, 895-900, (2014).
[33] Havare, A. K., Can, M., Demic, S., Kus, M., Icli, S., The performance of OLEDs based on sorbitol doped PEDOT:PSS, Synthetic Metals, 161, 2734-2738, (2012)