RFID ve GSM 900 MHz Uygulamaları için Elektronik Ayarlanabilir Yeni Bir Anten Tasarımı

In microwave systems, frequency tunable planar antennas have become common place as it is increasingly difficult to cover all the necessary frequency bands required. These antennas are low profile, conformable to planar and nonplanar surfaces, simple and inexpensive to manufacture using modern printed-circuit technology. The work presented in this paper proposes a electronically reconfigurable planar antenna by using only one varactor diode. Varactor diode from Skyworks Solutions Inc. (SVM1251) has been used as tuning element. It provides a tunable capacitance range from 53.65 to 2.79 pF with reverse voltages varying between 0 and 8 V. A 50 Ohm resistor as dummy load, and two 68 pF SMD capacitors are incorporated within the structure in order to protect the DC supply to Network Vector Analyzer from dc current, in addition to having an effect on the size reduction. Proposed antenna operate frequency between 400 MHz and 1116 MHz that include ultra-high frequency (UHF) for radio frequency identification (RFID) and Global Systems for Mobile Communications (GSM) applications. Proposed compact antenna having the overall physical size of 8 mm x 8 mm (0.0203λ x 0.0203 λ) is numerically modeled on FR4 substrate having loss tangent, dielectric constant and height of 0.025, 4.3, and 1.61 mm respectively in the CST Microwave Studio numerical calculation program over the frequency range from 300 MHz to 1.5 GHz. The proposed electrically tunable directional antenna has better return loss level higher than 25 dB with reduced size with novel geometrical structure in the operating frequency between 400 to 1116 MHz.
Anahtar Kelimeler:

Size reduction, GSM 900 MHz, RFID

A Novel Electronically Reconfigurable Antenna Design for RFID and GSM 900 MHz Applications

In microwave systems, frequency tunable planar antennas have become common place as it is increasingly difficult to cover all the necessary frequency bands required. These antennas are low profile, conformable to planar and nonplanar surfaces, simple and inexpensive to manufacture using modern printed-circuit technology. The work presented in this paper proposes a electronically reconfigurable planar antenna by using only one varactor diode. Varactor diode from Skyworks Solutions Inc. (SVM1251) has been used as tuning element. It provides a tunable capacitance range from 53.65 to 2.79 pF with reverse voltages varying between 0 and 8 V. A 50 Ohm resistor as dummy load, and two 68 pF SMD capacitors are incorporated within the structure in order to protect the DC supply to Network Vector Analyzer from dc current, in addition to having an effect on the size reduction. Proposed antenna operate frequency between 400 MHz and 1116 MHz that include ultra-high frequency (UHF) for radio frequency identification (RFID) and Global Systems for Mobile Communications (GSM) applications. Proposed compact antenna having the overall physical size of 8 mm x 8 mm (0.0203λ x 0.0203 λ) is numerically modeled on FR4 substrate having loss tangent, dielectric constant and height of 0.025, 4.3, and 1.61 mm respectively in the CST Microwave Studio numerical calculation program over the frequency range from 300 MHz to 1.5 GHz. The proposed electrically tunable directional antenna has better return loss level higher than 25 dB with reduced size with novel geometrical structure in the operating frequency between 400 to 1116 MHz.

___

  • Balanis C. A. (2008). Modern Antenna Handbook. New Jersey, USA: John Wiley & Sons Inc.
  • Balanis C. A.,(2005). Antenna Theory: Analysis and Design. New Jersey, USA: John Wiley & Sons Inc.
  • Cai L., & Cheng K. M. (2016, November). Continuously Tunable Polarization Agile Antenna Design Using a Novel Varactor-Only Signal Control Device, IEEE Antennas and Wireless Propagation Letters, 16, 1147 - 1150.
  • Maharsh D., & Pandit N., Pathak N. (2017, November). Design, Analysis and Characterization of Tunable Dual Band Planar Antenna for WLAN Applications. 2017 IEEE International Conference on Antenna Innovations & Modern Technologies for Ground, Aircraft and Satellite Applications.
  • Ghaffar F. A., Shamim A., & Bray J. R. (2014, July). Design Strategy for a Tunable Antenna on a Partially Magnetized Ferrite LTCC Substrate. 2014 IEEE Antennas and Propagation Society International Symposium (APSURSI).
  • Rahola J. (2018, March). Design of Frequency Tunable Antennas for Mobile Devices. 2018 International Workshop on Antenna Technology (iWAT).
  • Bouezzeddine M., & Schroeder W. L. (2016, July). Design of a Wideband, Tunable 4-port MIMO Antenna System with High Isolation Based on the Theory of Characteristic Modes. IEEE Transactions on Antennas and Propagation. 64(7).
  • Sharif A., Ouyang J., Chattha H. T., & Abbasi Q. H. (2018 July). Tunable Folded-Patch UHF RFID Tag Antenna Design using Theory of Characteristic Modes. 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.
  • Sheta A., Mahmoud S. F., & Member L. S. (2008, March ). A Widely Tunable Compact Patch Antenna. IEEE Antennas and Wireless Propagation Letters. 7.
  • Sharma S. K. (2013, December). Design Considerations of Reconfigurable and Tunable Planar Antennas. 2013 IEEE Applied Electromagnetics Conference (AEMC).
  • Qiang Bai, Ravinder Singh, Kenneth Lee Ford, Timothy O’Farrell, Richard J. Langley, (2017, December). An Independently Tunable Tri-Band Antenna Design for Concurrent Multiband Single Chain Radio Receivers”, IEEE Transactions on Antennas and Propagation. 65(12). 6290 - 6297 .
Avrupa Bilim ve Teknoloji Dergisi-Cover
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 2013
  • Yayıncı: Osman Sağdıç