Yaren SARP, İbrahim USTA, Sezer TAN, Hasan ALGÜL, Mehmet UYSAL, Ahmet ALP

Biriktirme Süresinin Akımsız Nikel-Bor Kaplamaların Sertlik ve Korozyon Özelliklerine Etkisi

Akımsız nikel esaslı kaplamalar, malzemelerin aşınma, sertlik ve korozyon gibi yüzey özelliklerini iyileştirmek için mükemmel bir yöntemdir. Alüminyum alaşımları ise ucuzluk ve hafiflik gibi özelliklerinden dolayı birçok uygulamada kullanılmaktadır. Alüminyum alaşımlarının bu iyi özelliklerinin yanında, düşük yüzey özellikleri endüstrideki bazı kullanım alanlarını sınırlar. Bu çalışmada, alüminyum alaşımlarının (6xxxx) yüzey özelliklerini iyileştirmek için alüminyum yüzeye akımsız nikel-bor (Ni-B) kaplamalar uygulanmıştır. Kaplama süresinin (30, 60, 90 dk.) Ni-B kaplamaların sertlik ve korozyon özellikleri araştırıldı. Yüzey morfolojisini incelemek için taramalı elektron mikroskobu (SEM) ve faz yapısını incelemek için X-ışını difraktometrisi (XRD) kullanıldı. SEM analiz sonuçlarına göre, Ni-B kaplamanın morfolojisinin artan kaplama süresi ile nodüler yapıdan karnabahar benzeri yapıya dönüştüğü deneysel çalışmalar sonucunda gözlemlenmiştir. Kaplamadaki, en yüksek sertlik değeri 90 dakikalık en yüksek biriktirme süresi ile 1140 Hv olarak elde edilmesine rağmen, en yüksek korozyon direnci 30 dakikalık en düşük biriktirme süresi ile 1.969x10-3 mpy olarak elde edilmiştir.

Anahtar Kelimeler:

Nikel-Bor, Sertlik, Korozyon, Mikroyapı, Akımsız Kaplama

Effect of Deposition Time on Hardness and Corrosion Properties of Electroless Nickel-Boron Coatings

Electroless nickel-based coatings are an excellent method to improve the surface properties of materials such as wear, hardness and corrosion. On the other hand, aluminum alloys are used in many applications" due to their properties such as cheapness and lightness. In addition to these good properties of aluminum alloys, their poor surface properties are limited in some usage areas in the industry. In this study, electroless nickel-boron (Ni-B) coatings were applied to the aluminum surface to improve the surface properties of the aluminum alloys (6xxxx). In this study, the effect of deposition time (30, 60, 90 min.) on the hardness and corrosion properties of Ni-B coatings was investigated. Scanning electron microscopy (SEM) was used to study the surface morphology, and X-ray diffractometry (XRD) was used to examine the phase structure. According to the SEM analysis results, it was observed as a result of the studies that the morphology of the Ni-B coating changed from nodular structure to cauliflower-like structure with increasing deposition time. Also, the thickness of the coatings is increased with an increase in the deposition time. According to the study's results, although the highest average hardness value is obtained as 1140 Hv by the highest deposition time of 90 min, the highest corrosion resistance is obtained as 1.969x10-3 mpy by the lowest deposition time of 30 min.

Keywords:

Nickel-Boron, Hardness, Corrosion, Microstructure,

PDF

___

Bekish, Y. N., Poznyak, S. K., Tsybulskaya, L. S., & Gaevskaya, T. V. (2010). Electrochimica Acta Electrodeposited Ni – B alloy coatings : Structure , corrosion resistance and mechanical properties. Electrochimica Acta, 55(7), 2223–2231. Retrieved from https://doi.org/10.1016/j.electacta.2009.11.069
Czagány, M., Baumli, P., & Kaptay, G. (2017). The influence of the phosphorous content and heat treatment on the nano-micro-structure, thickness and micro-hardness of electroless Ni-P coatings on steel. Applied Surface Science, 423, 160–169. Retrieved from https://doi.org/10.1016/J.APSUSC.2017.06.168
Dominguez-Rios, C., Torres-Sanchez, R., & Aguilar-Elguezabal, A. (2007). Characterization Of The film Of Ni-B Electroless on Steel S7, Through Optical Microscopy and Scanning Electron Microscopy. ECS Transactions, 3(25), 117–122. Retrieved from https://doi.org/10.1149/1.2753246
Kaya, B., Gulmez, T., & Demirkol, M. (2009). Study on the electroless Ni-B nano-composite coatings. AIP Conference Proceedings, 1127(September 2014), 62–73. Retrieved from https://doi.org/10.1063/1.3146199
Krishnaveni, K., Narayanan, T. S. N. S., & Seshadri, S. K. (2005). Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance. Surface and Coatings Technology, 190(1), 115–121. Retrieved 8 September 2022 from https://www.academia.edu/1522307/Electroless_Ni_B_coatings_preparation_and_evaluation_of_hardness_and_wear_resistance
Li, H., Li, H., Dai, W. L., Wang, W., Fang, Z., & Deng, J. F. (1999). XPS studies on surface electronic characteristics of Ni–B and Ni–P amorphous alloy and its correlation to their catalytic properties. Applied Surface Science, 152(1–2), 25–34. Retrieved from https://doi.org/10.1016/S0169-4332(99)00294-9
Loto, C. A. (2016). Electroless Nickel Plating – A Review. Silicon 2016 8:2, 8(2), 177–186. Retrieved 8 September 2022 from https://doi.org/10.1007/S12633-015-9367-7
Parkinson, R. (1997). Properties and Applications of Electroless Nickel. Nickel Development Institute Publication, 33. Retrieved from http://www.nickelinstitute.org/TechnicalLiterature/Technical Series/PropertiesandApplicationsofElectrolessNickel_10081_.aspx
Patterson, A. L. (1939). The Scherrer Formula for X-Ray Particle Size Determination. Physical Review, 56(10), 978. Retrieved 1 January 2022 from https://doi.org/10.1103/PhysRev.56.978
Shakoor, R. A., Kahraman, R., Gao, W., & Wang, Y. (2016). Synthesis, characterization and applications of electroless Ni-B coatings-A review. International Journal of Electrochemical Science, 11(3), 2486–2512.
Tian, S. S., Sun, W. C., Liu, Y. W., Jia, Y. P., & Xiao, Y. (2021). Effect of Na2WO4concentration on the microstructure and corrosion behavior of Ni-W-P ternary alloy coatings. Materials Research, 24(4). Retrieved from https://doi.org/10.1590/1980-5373-MR-2020-0580