Magrur KAZAK, Nazmiye DONMEZ, Safiye Selin KOYMEN, Rabianur KOYMEN, Kerem TEKDEMİR

Effect of thermal aging procedure on the microhardness and surface roughness of fluoride containing materials

Aim: The aim of this in vitro study was to evaluate the thermal aging effect on microhardness and surface roughness of fluoridecontaining restorative materials.Material and Methods: In this study, a bioactive material (Activa Bioactive Restorative, Pulpdent, Watertown, MA, USA), a giomer(Beautifil II, Shofu, Kyoto, Japan), a nanohybrid composite (Charisma Smart, Heraeus Kulzer, Germany), a resin-modified glassionomer (Ionoseal, VOCO, Germany), and a bulk-fill glass-hybrid material (Equia Forte, GC, Tokyo, Japan) were used. 10×2 mm discswere prepared (n=10) and then polymerized. Only for bulk-fill glass-hybrid specimens, one layer of coat was applied on top surfacesand light cured. Before and after thermal aging procedures, initial and final surface roughness and microhardness values wereevaluated. One-Way ANOVA test was used for the statistical analysis (p0.05). After thermal aging whenthe bottom surface of Equia Forte compared to Activa Bioactive and Beautifil II in terms of microhardness values, a staticticalsignificant difference was observed (p

PDF

___

1. Can G, Kalayci S, Kaplan R. An investigation of fluoride release of three different composite in artificial saliva. J Dent Fac Ankara Uni 2006;33:33-8.
2. Yip HK, Smales RJ. Fluoride release from a polyacidmodified resin composite and 3 resin modified glass ionomer materials. Quint Int 2000;31:261-6.
3. Bertacxhini SM, Abate PF, Blank A, et al. Solubilty and fluoride release in ionomers and compomers. Quint Int 1999;30:193-7.
4. Featherstone JD. The science and practice of caries prevention. J Am Dent Assoc 2000;131:887-99.
5. Francci C, Deaton TG, Arnold RR, et al. Fluoride release from restorative materials and its effects on dentin demineralization. J Dent Res 1999;78:1647-54.
6. Globler SR, Rossouw JR, Van Wykotze TJ. A comparison of fluoride release from various dental materials. J Dent 1998;26:259-65.
7. Gonulol N, Yilmaz F. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent 2012;40:64-70.
8. Valentini F, Oliveira SG, Guimaraes GZ, et al. Effect of surface sealant on the color stability of composite resin restorations. Braz Dent J 2011;22:365-68.
9. Willems G, Celis JP, Lambrechts P, et al. Hardness and young's modulus determined by nanoindentation technique of filler particles of dental restorative materials compared with human enamel. J Biomed Mater Res 1993;27:747-55.
10. Sonugelen M, Artunc C, Gungor MA. Examination of wear and hardness in esthetic restorative materials polymerized by different methods. J Dent Fac Ege Uni 2000;21:1-10.
11. Korkmaz Y, Ozel E, Attar N, et al. The influence of onestep polishing systems on the surface roughness and microhardness of nanocomposites. Oper Dent 2008;33:44-50.
12. Gale MS, Darvell B. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999;27:89-99.
13. Tekbas Atay M, Oguz Ahmet BS, Sayin Ozel G. The impotance of thermal and loading cycles in terms of simulation of the oral cavity. J Dent Fac Ataturk Uni 2016;14:88-93.
14. Lee YK, Lu H, Oguri M, et al. Changes in gloss after simulated generalized wear of composite resin. J Prosthet Dent 2005;94:370-76.
15. Paravina RD, Ontiveros JC, Powers JM. Accelerated aging effects on color and translucency of bleachingshade composites. J Esthet Restor Dent 2006;16:117- 26.
16. Erdilek D, Dorter C, Koray F, et al. Effect of thermomechanical load cycling on microleakage in Class II ormocer restorations. Eur J Dent 2009;3:200- 05.
17. Daneshkazemi AR, Davari A, Ataei E, et al. Effects of mechanical and thermal load cycling on micro tensile bond strength of clearfil SE bond to superficial dentin. Dent Res J (Isfahan) 2013;10:202-09.
18. De Munck J, Van Landuyt K, Coutinho E, et al. Microtensile bond strength of adhesives bonded to Class-I cavity-bottom dentin after thermo-cycling. Dent Mater 2013;21:999-1007.
19. Ten Cate JM. Review on fluoride with special emphasis on calcium fluoride mechanisms in caries prevention. Eur J Oral Sci 2007;105:461-5.
20. Griffın H, Donly KJ, Erickson R. Caries inhibition by fluoride releasing liners. Am J Dent 1992;5:293-95.
21. Dionysopoulos P, Kotsanos N, Pataridou A. Fluoride release and uptake by four new fluoride releasing restorative materials. J Oral Rehabil 2003;30:866-72.
22. Ortengren U, Wellendorf H, Karlsson S, et al. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Rehabil 2001;28:1106-15.
23. Ryba TM, Dun NWJ, Murchison DF. Surface roughness of various packable composites. Oper Dent 2002;27:243-47.
24. Wan Bakar WZ, McIntyre J. Susceptibility of selected tooth-coloured dental materials to damage by common erosive acids. Aust Dent J 2008;53:226-34.
25. Sener Y, Koyuturk AE. The comparison of the surface hardness of three different glass ionomer cements. Dent Fac Cumhuriyet Uni 2006;9:91-4.
26. Tahmassebi JF, Duggal MS, Malik-Kotru G, et al. Soft drinks and dental health: a review of the current literature. J Dent 2006;34:2-11.
27. Amaechi B, Higham S, Edgar W, et al. Thickness of acquired salivary pellicle as a determinant of the sites of dental erosion. J Dent Res 1999;78:1821-8.
28. Blackham JT, Vandewalle KS, Lien W. Properties of hybrid resin composite systems containing prepolymerized filler particles. Oper Dent 2009;34:697- 702.
29. Kundie F, Azhari CH, Muchtar A, et al. Effects of filler size on the mechanical properties of polymer-filled dental composites: A review of recent developments. J Phys Sci 2018:29:141-65.
30. Marghalani HY. Effect of filler particles on surface roughness of experimental composite series. J Appl Oral Sci 2010;18:59-67.
31. Meric G, Ruyter IE. Influence of thermal cycling on flexural properties of composites reinforced with unidirectional silica-glass fibers. Dent Mater 2008;24:1050-7.
32. Abdalla AI, El Zohairy AA, Aboushelib MM, et al. Influence of thermal and mechanical load cycling on the microtensile bond strength of self-etching adhesives. Am J Dent 2007;20:250-4.
33. do Amaral FL, Colucci V, de Souza-Gabriel AE, et al. Adhesion to Er: YAG laser-prepared dentin after longterm water storage and thermocycling. Oper Dent 2008;33:51-8.
34. Wataha JC, Rueggeberg FA, Lapp CA, et al. In vitro cytotoxicity of resin-containing restorative materials after aging in artificial saliva. Clin Oral Invest 1999;3:144-9.
35. Malacarne J, Carvalho RM, de Goes MF, et al. Water sorption/solubility of dental adhesive resins. Dent Mater 2006;22:973-80.
36. Ortengren U, Andersson F, Elgh U, et al. Influence of pH and storage time on the sorption and solubility behaviour of three composite resin materials. J Dent 2001;29:35-41.
37. Sideridou I, Terski V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylatebased dental resins. Biomaterials 2003;24:655-5.
38. Atai M, Nekoomanesh M, Hashemi SA. Physical and mechanical properties of an experimental dental composite based on a new monomer. Dent Mater 2004;20:663-8.
39. Ertas E, Guler AU, Yucel AC, et al. Color stability of resin composite after immersion in different drinks. Dent Mater J 2006;25:371-6.
40. Al-Shalan Thakib A. In vitro staining of nanocomposites exposed to a cola beverage. Pak Oral Dental J 2009;29:79-84.
41. Kamalak H, Canbay Canan A, Altin S. The mechanical properties of nanohybrid and bulk fill posterior composites. Biomed Res 2018;29:2179-86.
42. de Moraes RR, Marimon JL, Schneider LF, Sinhoreti MA, Correr-Sobrinho L, Bueno M. Effects of 6 Months of aging in water on hardness and surface roughness of two microhybrid dental composites. J Prosthodont 2008;17:323-6.
43. Tonetto MR, Santezi Neto C, Felício CM, et al. Effect of staining agents on color change of composites. RSBO 2012;9:266-71.
44. Hanchate S, Saraf A, Managala TM, et al. Evaluation of change in color of nanofill and microhybrid material after immersing in different beverages an in vitro study. IJSR 2018;7:25-7.
45. Faraji F, Heshmat H, Banava S. Effect of protective coating on microhardness of a new glass ionomer cement: Nanofilled coating versus unfilled resin. J Conserv Dent 2017;20:260-3.