İPLİK VE KUMAŞ KONSTRÜKSİYON PARAMETRELERİNİN DOKUMA KUMAŞLARIN DÖKÜMLÜLÜK VE EĞİLME DAVRANIŞINA ETKİSİ

Sertlik ve dökümlülük gibi tutum özellikleri giysi amaçlı kullanılan kumaşlar için çok önemlidir ve test cihazları ve/ ya da subjektif tekniklerle kişiler tarafından değerlendirilebilir. Kumaş tutumu lif, iplik, kumaş ve bitim işlemlerinden etkilenen karmaşık bir kavramdır. Kumaş tutumu ile ilgili pek çok çalışma olmasına rağmen tüketicilerin dikkatini çektiği için hala güncel bir konudur. Bu çalışmada iplik bükümü, çözgü sıklığı, kumaş konstrüksiyonu, iplik kat sayısı ve iplik numarasının pamuklu dokuma kumaşların dökümlülük ve eğilme özelliklerine etkisi incelenmiştir. Sonuçlar istatistiksel olarak t-testi ve varyans analizi ile değerlendirilmiştir

INFLUENCE OF YARN AND FABRIC CONSTRUCTION PARAMETERS ON DRAPE AND BENDING BEHAVIOUR OF COTTON WOVEN FABRICS

Handling characteristics such as stiffness and draping qualities have great importance for fabrics used in clothing and they could be evaluated by test devices and/ or by human judges using subjective techniques. Fabric hand is a complex phenomenon, which is influenced from the properties of fibers, yarns, fabrics and finishing treatments. Although there are numerous studies on fabric handle, it is still a contemporary subject, since it attracts the consumers’ attention. In this study, effect of yarn twist level, weft density, fabric weave pattern, yarn ply and yarn count on drapeability and bending properties of cotton fabrics were investigated. The results were compared and evaluated statistically by using independent samples T-Test and variance analysis methods

___

  • 1. Mäkinen, M., Meinander, H., Luible, C., Magnenat-Thalmann, N. 2005, “Influence of Physical Parameters on Fabric Hand”, Proceedings of the HAPTEX'05 Workshopon Haptic and Tactile Perception of Deformable Objects, Hanover, December
  • 2. Behery, H.M., 2005, “Effect of Mechanical and Physical Properties on Fabric Hand”, The Textile Institute, CRC Pres, Boca Raton Boston New York Washington, DC, Woodhead Publıshıng Lımıted Cambridge England.
  • 3. Owen, J.D. 1971, ‘Hand and Drape of Fabrics’, Shirley Link, 4, 18.
  • 4. Saville, B.P., 1999, Physical Testing of Textiles, Woodhead Publishing Ltd, Cambridge England, ISBN 0849305683, 256-259.
  • 5. AbouNassif, G.A., 2012, Effect of Weave Structure and Weft Density on the Physical and Mechanical Properties of Micro polyester Woven Fabrics, Life Sci J; 9(3):1326-1331). (ISSN: 1097-8135).
  • 6. Postle, R., 1989, “Fabric objective measurement: 1. Historical background and development”. Textile Asia, 20, 64.
  • 7. Schwartz, P. 2008, Structure and Mechanics of Textile Fiber Assemblies, Woodhead Textiles Series No. 80, ISBN-13: 978 1 84569 135 6
  • 8. Kayseri, G.Ö., Özdil, N., Süpüren Mengüç, G., 2012, “Chapter 9: Sensorial Comfort of Textile Materials”, Woven Fabrics p:235-266, InTech, Croatia, ISBN 978-953-51-0607-4.
  • 9. Ngoc, N.T.T., Anh, H.N., 2010, “Investigating on Fabric and Skirt Drape In Clothıng Construction”, 7th International Conference - TEXSCI 2010 September 6-8, Liberec, Czech Republic
  • 10. Okur, A., Cihan, T., 2001, “Kumaş Mekanik Özelliklerinin Dökümlülük Üzerine Etkileri”, Tekstil Maraton, Temmuz Ağustos, 4 pp.18-27.
  • 11. Alpay H. R. and Kavuşturan Y., 2000, “Pamuklu dokuma kumaşların eğilme dayanımını etkileyen faktörler”, Tekstil Maraton Eylül-Ekim 5.
  • 12. Çelik N., Dilsiz D., Bebekli M., 2002, “Dokumada konstrüksiyon ve atkı sıklığının kumaş performans özelliklerine etkisi”, Tekstil Maraton, Temmuz- Ağustos 4.
  • 13. Omeroglu, S., Karaca, E., Becerir, B., 2010, “Comparison of Bending, Drapability and Crease Recovery Behaviors of Woven Fabrics Produced from Polyester Fibers Having Different Cross-sectional Shapes”, Textile Research Journal, Vol 80(12): 1180–1190 .
  • 14. Süle G., 2012, “Investigation of Bending and Drape Properties of Woven Fabrics and the Effects of Fabric Constructional Parameters and Warp Tension on These Properties”, Textile Research Journal, 82(8) 810–819.
  • 15. Jevsnik, S., J. Gersak, 2004, “Modelling the Fused Panel for a Numerical Simulation of Drape”, Fibres & Textiles in Eastern Europe, 12, 47.
  • 16.http://coel.ecgf.uakron.edu/~chase/Equipment/equipment%20Stiffness%20Tester.pdf (available on 28.02.2014) 17. BS 3356:1990-Method for Determination of bending length and flexural rigidity of fabrics.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi
Sayıdaki Diğer Makaleler

Effects of calendering and milling processes on clothing comfort properties of suit fabrics

Nida OĞLAKCIOĞLU, Arzu MARMARALI, Emel MERT, Şehrazat BAL

TÜRK HAZIR GİYİM SANAYİNDE M. PORTER'IN JENERİK STRATEJİLERİNİN KULLANIMI VE FİRMALAR İÇİN STRATEJİ ÖNERİLERİ

Engin AKÇAGÜN, Vedat DAL

FARKLI YUMUŞATMA FORMÜLASYONLARI KULLANARAK ÇARŞAF ISIL KONFOR ÖZELLİKLERİNİN OPTİMİZASYONU

Maria Jose ABREU, Candida VIDRAGO, Graça Maria SOARES

Twist setting temperature and time effects on morphology of polyethylene terephthalate yarn

Kenan YILDIRIM, Hüseyin TUNA, Nurcan AYDIN, A. Melek KÖSTEM, Ayhan CENAN

Research on fast fashion and fast fashion retailing in Turkish apparel sector

Yasemin HACIOLA, Turan ATILGAN

KALANDIRLAMA VE DİNKLEME İŞLEMİNİN TAKIM ELBİSELİK KUMAŞLARIN GİYSİ KONFORU ÖZELLİKLERİNE ETKİSİ

Emel MERT, Nida OĞLAKCIOĞLU, Şehrazat BAL, Arzu MARMARALI

İPLİK VE KUMAŞ KONSTRÜKSİYON PARAMETRELERİNİN DOKUMA KUMAŞLARIN DÖKÜMLÜLÜK VE EĞİLME DAVRANIŞINA ETKİSİ

Nilgün ÖZDİL, Arif Taner ÖZGÜNEY, Gamze SÜPÜREN MENGÜÇ, Sima SERTSÖZ

Reducing product defects in apparel manufacturing by using the six sigma methodology: A case study

Kürşat ÖNCÜL, Mustafa GÜNEŞ, M. Çetin ERDOĞAN

The use of m. porter's generic strategies in the Turkish apparel industry and strategy proposals for companies

Engin AKÇAGÜN, Vedat DAL

METOT ANALİZİNİN ÜRETİM HACMİ VE MONTAJ HATTI VERİMLİLİĞİNE ETKİSİNİN ARAŞTIRILMASI

Mahmut KAYAR, Mehmet AKALIN