___

• [1] Philbeck, T., and Davis, N. (2018). “The fourth industrial revolution”. Journal of International Affairs, 72(1), 17-22.
• [2] Lemu, H. G. (2016/11). Beyond Rapid Prototyping: Study of prospects and challenges of 3D printing in functional part fabrication, : 138-143.
• [3] Petrick, I. J. and Simpson, T. W. (2013). 3D Printing Disrupts Manufacturing: How Economies of One Create New Rules of Competition, Research technology management 56 : 12-16.
• [4] Thompson, M. K.; Moroni, G.; Vaneker, T.; Fadel, G.; Campbell, R. I.; Gibson, I.; Bernard, A.; Schulz, J.; Graf, P.; Ahuja, B. and Martina, F. (2016). Design for Additive
• [5] ASTM F2792-12a, 2012. Standard Terminology for Additive Manufacturing Technologies, ASTM, Philadelphia.
• [6] Utela, B.R., Storti, D., Anderson, R.L., and Ganter, M., (2010). “Development process for custom three-dimensional printing (3dp) material systems”. Journal of Manufacturing Science and Engineering, Vol. 132 / 011008-1
• [7] Michaels, S., Sachs, E. M., and Cima, M. J., (1992). “Metal parts generation by three-dimensional printing”. Solid Freeform Fabrication Symposium, 244-250.
• [8] Gonzàlez, F. S., 2017. Re-design, manufacturing and assembly of a ceramic delta 3D printer. Aalto University, Industrial Engineering, Master’s Thesis, 67, Finland.
• [9] Gürgen, M., Kayacan, C. Bağlayıcı Püskürtmeli Metal Eklemeli İmalatta Kullanılan Parametreler. Uluborlu Mesleki Bilimler Dergisi, 3(1), 19-27.
• [10] Lores, A., Azurmendi, N., Agote, I., and Zuza, E. (2019). “A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics”. Powder Metallurgy, 62(5), 267-296.
• [11] Stevens, E., Schloder, S., Bono, E., Schmidt, D., and Chmielus, M. (2018). “Density variation in binder jetting 3D-printed and sintered Ti-6Al-4V”. Additive Manufacturing, 22, 746-752.
• [12] Paranthaman, M. P., Shafer, C. S., Elliott, A. M., Siddel, D. H., McGuire, M. A., Springfield, R. M., and Ormerod, J. (2016). “Binder jetting: a novel NdFeB bonded magnet fabrication process”. Jom, 68(7), 1978-1982.
• [13] Mostafaei, A., Stevens, E. L., Hughes, E. T., Biery, S. D., Hilla, C., and Chmielus, M., (2016). “Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties”. Materials & Design, 108, 126-135.
• [14] Patterson, A. E., Messimer, S. L., & Farrington, P. A. (2017). Overhanging features and the SLM/DMLS residual stresses problem: Review and future research need. Technologies, 5(2), 15.
• [15] Mukherjee, T., Zhang, W., and DebRoy, T. (2017). “An improved prediction of residual stresses and distortion in additive manufacturing”. Computational Materials Science, 126, 360-372.
• [16] Nastac, M., Klein, R. L. A., and ExOne, I. (2017). “Microstructure And Mechanical Properties Comparison Of 316l Parts Produced By Different Additive Manufacturing Processes”. Solid Freeform Fabrication Symposium, 28, 332-341.
• [17] Torabi, P., Petros, M., Khoshnevis, B., 2014. Calibration of a Piezo-Electric Printhead in the Selective Inhibition Sintering (SIS) Process for Fabrication of High-Quality Metallic Parts. In
• [18] Schmitt, C.T., 2016. Low-Cost Inkjet Process for 3-D Printing, Undergraduate Honors Theses, 53, University of Arkansas.
• [19] Derby, B., (2010). “Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution”. Annual Review of Materials Research, 40, 395-414.
• [20] Cheng, Y. L., Chang, C. H., & Kuo, C. (2020). Experimental study on leveling mechanism for material-jetting-type color 3D printing. Rapid Prototyping Journal.
• [21] Schueren B.V, Kruth J.P., 1995. Powder deposition in selective metal powder sintering. Rapid Prototyping Journal, 1, 23-31.