Thyristor-based "phase hopping" frequency conversion technique

  This study proposes a new AC/AC "phase hopping" frequency conversion method based on the analyses of the disadvantages of the conventional cosine wave-crossing method. The advantages of this new method include no circulating current, no dead time, and an output frequency close to the power frequency. This study also introduces the basic principles of the "phase hopping" method and analyzes these principles combined with the voltage phase-changing comparison to that of the cosine wave-crossing method. The "phase hopping" principles are used to analyze the generation of thyristor trigger pulses, including the generation time and duration. A simulation is conducted in MATLAB, and the simulation output waveform and harmonic analysis results are then obtained. The proposed approach is verified on an experimental platform. Consequently, the results are in good agreement with those of the theoretical and simulation analyses.

___

  • Idris Z, Hamzah MK, Saidon MF. Implementation of single-phase matrix converter as a direct AC-AC converter with commutation strategies. In: IEEE 2006 Power Electronics Specialists Conference; 18–22 June 2006; Jeju, South Korea. New York, NY, USA: IEEE. pp. 1-7.
  • Nair HS, Ramchand DR. A new switching algorithm for an AC-AC converter with high frequency link. In: IEEE 2015 Conference of the IEEE Industrial Electronics Society; 9–12 November 2015; Yokohama, Japan. New York, NY, USA: IEEE. pp. 4615-4620 .
  • Cho Y, Cokkinides GJ, Meliopoulos AP. Advanced time domain method for remote wind farms with LFAC transmission systems: power transfer and harmonics. In: IEEE 2012 International Conference on Harmonics and Quality of Power; 17–20 June 2012; Hong Kong, China. Washington, DC, USA: IEEE. pp. 1-6.
  • Chen X, Du QN. Research on modified pulse triggering control strategy of AC-AC converter. Colliery Mech Elect 2014; 3: 34-37.
  • Azam, MA. Three to single phase buck-boost regulated high power quality cycloconverter. In: IEEE 2012 Innovative Smart Grid Technologies-Asia; 21–24 May 2012; Tianjin, China. Washington, DC, USA: IEEE. pp. 1-6.
  • Symonds A, Laylabadi M. Large cycloconverter drives in mining applications. In: IEEE 2013 Industry Applications Society Annual Meeting; 6–11 October 2013; Lake Buena Vista, FL, USA. New York, NY, USA: IEEE. pp. 1-12.
  • Bhowmik PK , Yellapragada S, Manjrekar M. Dynamic analysis and controller design for a center-point-clamped AC- AC converter. In: IEEE 2015 Applied Power Electronics Conference and Exposition; 15–19 March 2015; Charlotte, NC, USA. New York, NY, USA: IEEE. pp. 535-542.
  • Basirifar M, Shoulaie A. A comparative study of circulating current free and circulating current cycloconverters. In: IEEE 2010 Power Quality Conference; 14–15 September 2010; Tehran, Iran. Washington, DC, USA: IEEE. pp. 1-4.
  • Imam MHT, Azam A, Azad AN, Kabir MA. Three to single phase buck and boost cycloconverters with good input power quality. In: IEEE 2012 Innovative Smart Grid Technologies-Asia; 21–24 May 2012; Tianjin, China. Washington, DC, USA: IEEE. pp. 1-6.
  • Khodabandeh M, Zolghadri MR, Shahbazi M, Noroozi N. T-type direct AC/AC converter structure. IET Power Electron 2016; 9: 1426-1436.