Measurement of sound velocity in oil wells based on fast adaptive median filtering

Measurement of sound velocity in oil wells has long been a challenging industrial issue due to the difficulty in obtaining clear oil pipe coupling waves in strong noise. In this paper, a novel sound velocity measurement method is developed for the dynamic liquid level of oil wells based on fast adaptive median filtering. First, to solve the noise interference problem in the reflected oil pipe coupling wave, a fast adaptive median filtering algorithm is proposed to obtain an accurate oil pipe coupling wave. Then a curve fitting method based on range discrete coefficient is developed to estimate the sound velocity in the tubing-casing annular space of oil wells. The fitting sound velocity can reflect the propagation rule of the real sound velocity. In particular, the sound velocity at any position within the tubing-casing annular space can be accurately calculated by the fitting function. Finally, the proposed method is applied to the dynamic liquid level of an oil well. Experimental results show the effectiveness and favorable accuracy in estimating the sound velocity distribution.

___

  • [1] Hato T, Tsukamoto A, Adachi S, Oshikubo Y, Watanabe H et al. Development of hts-squid system for a monitoring system of co2 enhanced oil recovery. IEEE Transactions on Applied Superconductivity 2016; 27 (4): 1-5. doi: 10.1109/TASC.2016.2632106
  • [2] Li S, Hou D, Lei S. Developing gas injection according to local conditions in china to improve oil recovery technology. Natural Gas & Oil 2013; 31 (1): 44-48 (in Chinese with an abstract in English). doi: 10.3969/j.issn.1006- 5539.2013.01.012
  • [3] Razak RA, Dundar DF. Evaluation and selection processes of petroleum exploration and development projects: an empirical study. In: Portland International Conference on Management of Engineering & Technology; Portland, OR, USA; 2001. pp. 411-422.
  • [4] Shuvalov GV, Mamonov AA, Polovinkin VN, Klekovkin IV, Yasyrova QA et al. Development of standard and measuring devices to determine the parameters of petroleum products. In: International Conference on Actual Problems of Electronics Instrument Engineering; Novosibirsk, Russia; 2015. pp. 150-152.
  • [5] Gaspar ATFS, Barreto CEAG, Schiozer DJ. Assisted process for design optimization of oil exploitation strategy. Journal of Petroleum Science & Engineering 2016; 146: 473-488. doi: 10.1016/j.petrol.2016.05.042
  • [6] Yuan Z, Wang J, Li S, Ren J, Zhou M. A new approach to estimating recovery factor for extra-low permeability water-flooding sandstone reservoir. Petroleum Exploration & Development 2014; 41 (3): 377-386. doi: 10.1016/S1876-3804(14)60043-4
  • [7] Ai-Jun XU. Annular liquid level auto-monitoring and implementation in oil pumping wells. Journal of Oil & Gas Technology 2011; 33 (9): 150-151 (in Chinese with an abstract in English).
  • [8] Wan XF, Qi-Jun YI, Lei JT, Ding M, Zhang JF. Realization of remote working level automatic measurement device of oil well. Chinese Journal of Engineering Design 2013; 20 (3): 260-264 (in Chinese with an abstract in English). doi: 10.3785/j.issn.1006-754X
  • [9] Tong W, Duan Z. Soft sensor modeling method of dynamic liquid level based on improved ks algorithm. In: 29th Chinese Control And Decision Conference; Chongqing, China; 2017. pp. 6510-6515.
  • [10] Zhou W, Liu J, Gan L. Dynamic liquid level detection method based on resonant frequency difference for oil wells. Turkish Journal of Electrical Engineering & Computer Sciences 2018; 26 (6): 2968-2976. doi: 10.3906/elk-1805-68
  • [11] Meng KY, Zhuang GL, Cao QN. The method of extracting the liquid level value of a pumping well from the echo signal of liquid surface. Journal of Xi’an Petroleum Institute (Natural Science Edition) 2001; 16 (4): 66-67 (in Chinese with an abstract in English).
  • [12] He S, Wang M. Oil well depth test based on wavelet algorithm. Chinese Journal of Scientific Instrument 2005; 26: 378-381 (in Chinese with an abstract in English). doi: 10.19650/j.cnki.cjsi.2005.04.012
  • [13] Fengjiang W, Chen P. Processing of array sonic logging data with multi-scale stc technique. Petroleum Science 2008; 5 (3): 238-241. doi: 10.1007/s12182-008-0036-y
  • [14] Xiao B, Li KL. Design of a new well depth liquid level test. Marine Geology Letters 2007; 23: 39-42.
  • [15] McCoy J, Rowlan O, Podio A. Acoustic liquid level testing of gas wells. In: SPE Production and Operations Symposium; Oklahoma City, OK, USA; 2009. pp. 4-8.
  • [16] Lu D, He G. Study on pseudo liquid level of high oil gas ratio well. Petroleum Geology and Engineering 2010; 24: 104-107.
  • [17] Terzic J, Nagarjah RC, Alamgir M. Fluid level measurement in dynamic environments using a single ultrasonic sensor and support vector machine (SVM). Sensors & Actuators A Physical 2010; 161 (1): 278-287. doi: 10.1016/j.sna.2010.05.005
  • [18] Wang HW, Lin LX, Zhong-Wei DU, Zhang M. Signal processing in liquid level detection with acoustic method based on spectral subtraction. Journal of Oil & Gas Technology 2012; 34 (1): 118-122.
  • [19] Li X. A method for calculating the depth of liquid surface by indicator diagram. China Petroleum and Chemical Engineering Standards and Quality 2012; 33: 90-95 (in Chinese with an abstract in English).
  • [20] Ren J, Wang P, Tian-Jin YU. A sonic velocity extracting method to deal with dynamic working level echo signals in an oil well. Industrial Instrumentation & Automation 2008; 5: 63-65.
  • [21] Liu Y, Wang Y. Spectral analysis technique of ultrasonic pulse-echo in measuring sound velocity. Technical Acoustics 2008; 27: 116-117.
  • [22] Zhou JX, Wang CS, Wang JX, Yao GY. Calculation of acoustic velocity in annular space of the pumping well’s casing based on AMDF. Chinese Journal of Sensors & Actuators 2007; 20: 1648-1651 (in Chinese with an abstract in English).
  • [23] Wei P, Liang Z, Ma C, Yeo TS. Fast median filtering algorithm based on FPGA. In: IEEE International Conference on Signal Processing; Chongqing, China; 2010. pp. 426-429.
  • [24] Zhou W, Zhang D. Progressive switching median filter for the removal of impulse noise from highly corrupted images. IEEE Transition Circuits & Systems II 1999; 46 (1): 78-80.
  • [25] Hsieh HJ, Chen B, Hung JW. Employing median filtering to enhance the complex-valued acoustic spectrograms in modulation domain for noise-robust speech recognition. In: International Symposium on Chinese Spoken Language Processing; Tianjin, China; 2016. pp. 1-5.
  • [26] Aranda LA, Reviriego P, Maestro JA. Error detection technique for a median filter. IEEE Transactions on Nuclear Science 2017; 64 (8): 2219-2226.
  • [27] Zhang H, Zhu C. A filter structure for arbitrary re-sampling ratio conversion of a discrete signal. Information 2017; 8 (2): 53. doi: 10.3390/info8020053
  • [28] Xie S, Wang P, Xie Y. New image denoising algorithm based on improved grey prediction model. Congress on Image & Signal Processing 2008; 3: 367-331.
  • [29] Ning CY, Liu SF, Qu M. Research on removing noise in medical image based on median filter method. In: International Symposium on IT in Medicine & Education; Piscataway, NJ, USA; 2009. pp. 384-388.
  • [30] Tripathi AK, Ghanekar U, Mukhopadhyay S. Switching median filter: advanced boundary discriminative noise detection algorithm. IET Image Processing 2011; 5 (7): 598-610. doi: 10.1049/iet-ipr.2010.0252
  • [31] Tang QH, Lei JE, Zhou Y, Nanchang Y. Multi-scale space compressed measure-integral based median computation. Journal of Image & Graphics 2009; 14 (4):642-646 (in Chinese with an abstract in English).