Ercan KÖSE, Hakan KIZMAZ, Kadir ABACI, Saadettin AKSOY

Control of SVC based on the sliding mode control method

A genetic algorithm (GA)-based sliding mode controller is proposed to improve the voltage stability of a power system with a static var compensator. The proposed controller is examined for improving the load bus voltage, which changes under different demanding powers, and its performance for transient analysis is compared with the Ziegler--Nichols proportional-integral (ZNPI), Lyapunov-based sliding mode control (LASMC), and GA-based proportional-integral-derivative (GAPID) controllers. The dynamic equations, consisting of a 2-bus nonlinear system, are converted to a mathematical description of sliding mode techniques. The optimum values of the sliding mode controller and proportional-integral-derivative (PID) coefficients that are required are calculated using the GA technique. Output voltage performances are obtained based on the demanding powers, which are at a constant variation. In this process, sliding mode, ZNPI, GAPID, and LASMC controllers are preferred in order to control the system. The results show that the GA sliding mode controller method is more effective than the ZNPI, GAPID, and LASMC controllers in voltage stability enhancement.

Anahtar Kelimeler:

Genetic algorithm, sliding mode controller, static var compensator, PI controller, voltage stability

Control of SVC based on the sliding mode control method

Keywords:

Genetic algorithm, sliding mode controller, static var compensator, PI controller, voltage stability,

PDF

___

C. Jaipradidthan, “Adaptive neuro-fuzzy SVC for multimachine hybrid power system stability improvement with a long of double circuit transmission lines”, International Symposium on Neural Networks, pp. 668–673, 2005.
A. Albakkar, O.P. Malik, “Adaptive neuro-fuzzy FACTS controller for transient stability enhancement”, 16th National power System Conference, pp. 237–242, 2010.
M. Sridhar, K. Vaisakh, K. Murthy, “Adaptive PSO based tuning of PID-fuzzy and SVC-PI controllers for dynamic stability enhancement: a comparative analysis”, 2nd International Conference on Emerging Trends in Engineering and Technology, pp. 985–990, 2009.
J. Wang, C. Fu, Y. Zhang, “SVC control system based on instantaneous reactive power theory and fuzzy PID”, IEEE Transactions on Industrial Electronics, Vol. 55, pp. 1658–1665, 2008.
M.J. Laufenberg, M.A. Pai, K.R. Padiyar, “Hopf bifurcation control in power systems with static var compensators”, Electric Power and Energy Systems, Vol. 19, pp. 339–347, 1997.
P. Kundur, Power System Stability and Control, New York, McGraw-Hill, 1993.
J.R. Smith, D.A. Pierre, I. Sadighi, M.H. Nehrir, J.F. Hauer, “A supplementary adaptive var unit controller for power system damping”, IEEE Transactions on Power Systems, Vol. 4, pp. 1017–1023, 1989.
L.F. Li, K.P. Liu, M. Li, “Intelligent control strategy of SVC”, IEEE/PES Transmission and Distribution Conference & Exhibition: Asia and Pacific, 2005.
J. Lu, M.H. Nehrir, D.A. Pierre, “A fuzzy logic-based adaptive damping controller for static VAR compensator”, Electric Power Systems Research, Vol. 68, pp. 113–118, 2004.
N. Karpagam, D. Devaraj, “Fuzzy logic control of static var compensator for power system damping”, International Journal of Electrical and Electronics Engineering, Vol. 28, pp. 625–631, 2009.
J. Tie-zheng, C. Chen, C. Guo-yun, “Nonlinear optimal predictive controller for static var compensator to power system damping and to maintain voltage”, Frontiers of Electrical and Electronic Engineering in China, Vol. 4, pp. 380 −384, 2006.
Y. Wang, H. Chen, R. Zhou, “A nonlinear controller design for SVC to improve power system voltage stability”, Electrical Power and Energy Systems, Vol. 22, pp. 463–470, 2000.
R. Yan, Z.Y. Dong, T.K. Saha, J. Ma, “Nonlinear robust adaptive SVC controller design for power systems”, Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, pp. 1–7, 200 J.J. Slotine, W. Li, Applied Nonlinear Control, Englewood Cliffs, NJ, USA, Prentice-Hall, 1991.
M.J. Jang, C.L. Chen, C.K. Chen, “Sliding mode control of hyperchaos in R¨ ossler systems”, Chaos, Solitons & Fractals, Vol. 13, pp. 1465–1476, 2002.
˙I. Eker, “Sliding mode control with PID sliding surface and experimental application to an electromechanical plant”, ISA Transactions, Vol. 45, pp. 109–118, 2006.
H.K. Khalil, Nonlinear Systems, Upper Saddle River, NJ, USA, Prentice-Hall, 1996.
J.V. Hung, W. Gao, J.C. Hung, “Variable structure control: a survey”, IEEE Transactions on Industrial Electronics, Vol. 40, pp. 2–22, 1993.
Q.P. Ha, Q.H. Nguyen, D.C. Rye, H.F.D. Whyte, “Fuzzy sliding mode controllers with applications”, IEEE Transactions on Industrial Electronics, Vol. 48, pp. 38–46, 2001.
F. Zhou, D.G. Fisher, “Continuous sliding mode control”, International Journal of Control, Vol. 55, pp. 313–327, 19 C.C. Wong, S.Y. Chang, “Parameter selection in the sliding mode control design using genetic algorithms”, Tamkang Journal of Science and Engineering, Vol. 1, pp. 115–122, 1998.
J.H. Holland, “Outline for a logical theory of adaptive systems”, Journal of the ACM, Vol. 3, pp. 297–314, 1962. J.H. Holland, Adaptation in Natural and Artificial Systems, Ann Arbor, MI, USA, University of Michigan Press, 19
J.G. Digalakis, K.G. Margaritis, “An experimental study of benchmarking functions for genetic algorithms”, International Journal of Computer Mathematics, Vol. 79, pp. 403–416, 2002.
D.S. Pereira, J.O.P. Pinto, “Genetic algorithm based system identification and PID tuning for optimum adaptive control”, International Conference on Advanced Intelligent Mechatronics, pp. 801–806, 2005.
E. K¨ ose, K. Abacı, S. Aksoy, M.A. Yal¸ cın, “The comparison of the improving effects of ULTC and SVC on dynamical voltage stability using neural networks”, IEEE Modern Electric Power Systems, 2010.
J.G. Ziegler, NB. Nichols, N.Y. Rochester, “Optimum settings for automatic controllers”, Transactions of the ASME, Vol. 64, pp. 759–768, 1942.
K.J. Astr¨ om, T. Hagglund, “Automatic tuning of simple regulators with specifications on phase and amplitude margins”, Automatica, Vol. 20, pp. 645–651, 1984.
C.C. Hang, K.J. Astr¨ om, W.K. Ho, “Refinements of the Ziegler-Nichols tuning formula”, IEE Proceedings - D: Control Theory & Applications, Vol. 138, pp. 111–118, 1991.
R. Hooshmand, M. Ataei, A. Zargari, “A new fuzzy sliding mode controller for load frequency control of large hydropower plant using particle swarm optimization algorithm and Kalman estimator”, European Transactions on Electrical Power, Vol. 22, pp. 812–830, 2012.
˙I. Eker, “Second-order sliding mode control with experimental application”, ISA Transactions, Vol. 49, pp. 394–405, 20 S. Xiao-gen, X. Li-qing, H. Cheng-chun, “Optimization of PID parameters based on genetic algorithm and interval algorithm”, Chinese Control and Decision Conference, pp. 741–745, 2009.
F.F. Ewald, A.S.M. Mohammad, Power Quality in Power Systems and Electrical Machines, Burlington, MA, USA, Academic Press, pp. 405–406, 2008.
W. He, C. Zhi-mei, Z. Jing-gang, M. Wen-jun, “Terminal sliding mode control for multi-degree-of-freedom robot based on genetic algorithm”, 5th International Conference on Natural Computation, pp. 420–424, 2009.
T. Wang, Q. Chi, C. Liu, “Parameter identification and compensation control of friction model for PMSLS based on genetic algorithm”, Chinese Control and Decision Conference, pp. 2391–2394, 2009.
K. Kristinsson, G.A. Dumont, “Genetic algorithms in system identification”, 3rd IEEE International Symposium on Intelligent Control, pp. 597–602, 1988.
M. Schleicher, F. Blasinger, Control Engineering - A Guide for Beginners, Germany, Jumo GmbH & Co. KG, pp. 69–70, 2003.