Chemical composition and suitability of some Turkish thermal muds as peloids

  Thermal muds have been used in many spas for the treatment of different diseases as well as to clean and beautify the skin and in different forms such as mud baths, masks, and cataplasms. Mineralogical and chemical compositions and the possible toxicity of the peloids were investigated and compared with some limits to determine whether they have any health benefits and potential applications for pelotherapeutic treatments. The studied peloid samples were collected from 19 spas in different parts of Turkey and they were classified as neutral to slightly alkaline, with a high electrical conductivity value that had a high chlorine content and was regarded as highly conductive. The temperature of the peloids was between 23.2 and 61.0 °C. The mineralogical composition mainly comprised smectite and illite, partially quartz and feldspar, some carbonate (calcite and dolomite), and other minerals. The most abundant clay mineral was Ca-montmorillonite. The major and trace element contents of some of the peloids were similar to each other, while the contents of some toxic elements showed a clear variation. Toxic element contents, e.g., As, Cd, Hg, Pb, and Sb, of the peloids were higher or lower than the commercial herbalist clay, pharmaceutical clay, natural clay, average clay, and Canadian Natural Health Products Guide. The toxicity of some hazardous elements was compared, especially that of the pharmaceutical clay, and evaluated together with other parameters. Toxic elements were higher than in the pharmaceutical clay in most of the peloids.

___

  • Adamis Z, Williams RB (2005). Bentonite, Kaolin, and Selected Clay Minerals. Environmental Health Criteria. Geneva, Switzerland: World Health Organization.
  • Adriano DC (2001). Trace Elements in Terrestrial Environments: Biochemistry, Bioavailability, and Risk of Metals. 2nd ed. Berlin, Germany: Springer-Verlag.
  • Afridi HI, Kazi TG, Kazi GH, Jamali KK, Shar GQ (2006). Essential trace and toxic element distribution in the scalp hair of Pakistani myocardial infarction patients and controls. Biol Trace Elem Res 113: 19-34.
  • ATSDR (2004). Toxicological Profile for Cobalt. Atlanta, GA, USA: Agency for Toxic Substances and Disease Registry.
  • ATSDR (2005). Toxicological Profile for Nickel. Atlanta, GA, USA: Agency for Toxic Substances and Disease Registry.
  • ATSDR (2007). Toxicological Profile for Arsenic. Atlanta, GA, USA: Agency for Toxic Substances and Disease Registry.
  • Avşar Ö, Avşar U, Arslan Ş, Kurtuluş B, Niedermann S, Güleç N (2017). Subaqueous hot springs in Köyceğ iz Lake and Dalyan Channel (SW Turkey) J Volcanol Geotherm Res 345: 81-97.
  • Barbieri P (1996). Validita terapeutica dei fanghi delle Terme di Salice. In: Veniale F editor. Atti Convegno “Argille Curative”, Salice Terme/PV. Rome, Italy: Gruppo Italiano AIPEA, pp. 13-15 (in Italian).
  • Bocca B, Pino A, Alimonti A, Forte G (2014). Toxic metals contained in cosmetics: A status report. Regul Toxicol Pharmacol 68: 447-467.
  • Brindley GW (1980). Quantitative X-ray mineral analysis of clays: In: Brindley GW, Brown G, editors. Crystal Structures of Clay Minerals and Their X-ray Identification. London, UK: Mineralogical Society, pp. 411-438.
  • Carretero MI, Pozo M, Martin-Rubi JA, Pozo E, Maraver F (2010). Mobility of elements in interaction between artificial sweat and peloids used in Spanish spas. Appl Clay Sci 48: 506-515.
  • Çelik Karakaya M, Doğ ru M, Karakaya N, Kuluöztürk F (2017a). Natural radioactivity levels and hydrochemical properties of certain therapeutic waters in Turkish Spas. J Water Health 15.4: 591-601.
  • Çelik Karakaya M, Doğ ru M, Karakaya N, Vural CH, Kuluöztürk F, Bal SŞ (2015). Radioactivity concentrations and dose assessments of therapeutic peloids from some Turkish spas. Clay Miner 50: 221-232.
  • Çelik Karakaya M, Karakaya N, Aydın ME, Vural CH, Nalbantçılar MT (2013). Investigation of Properties of Thermal Muds and Waters Using for Therapeutic Purposes. Ankara, Turkey: TÜBİTAK Project Report (in Turkish).
  • Çelik Karakaya M, Karakaya N, Aydın S (2017b). Physical and physicochemical properties of some Turkish thermal muds and pure clay minerals and their uses in Therapy. Turkish J Earth Sci 26: 395-409.
  • Çelik Karakaya M, Karakaya N, Cingilli Vural H (2016). Thermal properties of some Turkish peloids and clay minerals for their use in pelotherapy. Geomaterials 6: 79-90.
  • Craig PJ (1986). Organometallic Compounds in the Environment. Harlow, UK: Longman Group Limited.
  • Das KK, Das SN, Dhundasi SA (2008). Nickel, its adverse health effects & oxidative stress. Indian J Med Res 128: 412-425.
  • Davraz A, Afşin M, Karakaş Z, Hınıs MA (2016). The interference of a deep thermal system with a shallow aquifer and health risk assessment: the case of Sandıklı (Afyonkarahisar) Basin, Turkey. Environ Earth Sci 75: 332.
  • EPA (2004). Risk Assessment Guidance for Superfund. Volume I: Human Health Evaluation Manual, Part E. Washington, DC, USA; Environmental Protection Agency.
  • Fan AM, Kizer KW (1990). Selenium. nutritional, toxicologic and clinical aspects. West J Med 153: 160-167.
  • Favero JS, Parisotto-Peterle J, Weiss-Angeli V, Brandalise RN, Gomes LB, Bergmann CP, dos Santos V (2016). Physical and chemical characterization and method for the decontamination of clays for application in cosmetics. Appl Clay Sci 124-125: 252-259.
  • Gemici Ü, Filiz Ş (2001). Hydrochemistry of Çeşme geothermal area in western Turkey. J Volcanol Geotherm Res 110: 171-187.
  • Gemici Ü, Tarcan G (2002). Hydrogeochemistry of the Simav geothermal field, western Anatolia, Turkey. J Volcanol Geotherm Res 116: 215-233.
  • Gomes CSF, Silva JBP (2007). Mineral and clay minerals in medical geology. Appl Clay Sci 36: 4-21.
  • Guy RH, Hostynek JJ, Hinz RS, Lorence CR (1999). Metals and the Skin. New York, NY, USA: Marcel Dekker, Inc.
  • Health Canada (2009). Draft Guidance on Heavy Metal Impurities in Cosmetics. Ottawa, Canada: Health Canada.
  • IARC (1989). Chemicals, Groups of Chemicals, Mixtures and Exposure Circumstances to Be Evaluated in Future IARC Monographs. Report of an Ad Hoc Working Group (IARC Intern. Tech. Rep. No. 89/004). Lyon, France: International Agency for Research on Cancer.
  • IARC (1997). Silica, Some Silicates, Coal Dust and Para-Aramid Fibrils. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans. Lyon, France: International Agency for Research on Cancer.
  • IARC (2012). Arsenic, Metals, Fibres, and Dusts. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans. Lyon, France: International Agency for Research on Cancer.
  • Jackson ML (1975). Soil Chemical Analysis - Advanced Course. 2nd ed. Madison, WI, USA: University of Wisconsin.
  • Jain CK, Ali I (2000). Arsenic: occurrence, toxicity and speciation techniques. Water Res 34: 4304-4312.
  • Kalkan E, Canbolat MY, Yarbaşı N, Özgül M (2012). Evaluation of thermal mud characteristics of Erzurum (Köprüköy) clayey raw materials (NE Turkey). Int J Phys Sci 7: 5566-5576.
  • Kikouama OJR, Konan KL, Bonnet JP, Baldé L, Yagoubi N (2009). Physicochemical characterization of edible clays and release of trace elements. Appl Clay Sci 43: 135-141.
  • Leggett RW (2008). The biokinetics of inorganic cobalt in the human body. Sci Total Environ 389: 259-269.
  • Lindh U (2005). Uptake of elements from a biological point of view. In: Selinus O, Alloway B, Centeno JA, Finkelman RB, Fuge R, Lindh U, Smedley P, editors. Essentials of Medical Geology. Amsterdam, the Netherlands: Elsevier, pp. 87-114.
  • López-Galindo A, Viseras C, Cerezo P (2007). Compositional, technical and safety specifications of clays to be used as pharmaceutical and cosmetic products. Appl Clay Sci 36: 51- 63.
  • Mascolo N, Summa V, Tateo F (1999). Characterization of toxic elements in clays for human healing use. Appl Clay Sci 15: 491- 500.
  • Mascolo N, Summa V, Tateo F (2004). In vivo experimental data on the mobility of hazardous chemical elements from clays. Appl Clay Sci 25: 23-28.
  • Mattioli M, Giardini L, Roselli C, Desideri D (2016). Mineralogical characterization of commercial clays used in cosmetics and possible risk for health. Appl Clay Sci 119: 449-454.
  • Mihelčić G, Kniewald G, Ivanišević G, Čepelak R, Mihelčić V, Vdović N (2012). Physico-chemical characteristics of the peloid mud from Morinje Bay (eastern Adriatic coast, Croatia): suitability for use in balneotherapy. Environ Geochem Hlth 34: 191-198.
  • Moore DM, Reynolds RC (1997). X-ray Diffraction and the Identification and Analysis of Clay Minerals. 2nd ed. New York, NY, USA: Oxford University Press.
  • Mutlu H (2007). Constraints on the origin of the Balıkesir thermal waters (Turkey) from stable isotope (δ 18 O, δD, δ 13 C, δ 34 S) and major-trace element compositions. Turkish J Earth Sci 16: 13- 32.
  • Nielsen GD, Nielsen JB, Andersen KE, Grandjean P (2000). Effects of industrial detergents on the barrier function of human skin. Int J Occup Env Hea 6: 138-142.
  • Nielsen NH, Linneberg A, Menne T, Madsen F, Frolund L, Dirksen A, Jorgensen T (2002). Incidence of allergic contact sensitization in Danish adults between 1990 and 1998; the Copenhagen Allergy Study, Denmark. Brit J Dermatol 147: 487-492.
  • NRC (1999). Arsenic in Drinking Water. Washington, DC, USA: National Research Council.
  • Özen T, Tarcan G, Gemici Ü (2005). Hydrogeochemical study of the selected thermal and mineral waters in Dikili town, İzmir, Turkey. In: Proceedings of the World Geothermal Congress, Antalya, pp. 1-12.
  • Özler HM (2000). Hydrogeology and geochemistry in the Curuksu (Denizli) hydrothermal field, western Turkey. Environ Geol 39: 1169-1180.
  • Pasvanoğ lu S, Güler S (2010). Hydrogeological and geothermal features of hot and mineralized waters of the A ğrı-Diyadin (Turkey). In: Proceedings of the World Geothermal Congress, Bali, Indonesia, pp. 1-10.
  • Quintela A, Terroso D, Ferreira da Silva E, Rocha F (2012). Certification and quality criteria of peloids used for therapeutic purposes. Clay Miner 47: 441-451.
  • Razo I, Carrizales L, Castro J, Díaz-Barriga F, Monroy M (2004). Arsenic and heavy metal pollution of soil, water and sediments in a semi-arid climate mining area in Mexico. Water Air Soil Pollut 152: 129-152.
  • Rebelo M, Viseras C, López-Galindo A, Rocha F, Ferreira da Silva E (2011). Rheological and thermal characterization of peloids made of selected Portuguese geological materials. Appl Clay Sci 51: 219-227.
  • Rovira J, Nadal M, Schuhmache M, Domingo JL (2015). Human exposure to trace elements through the skin by direct contact with clothing: risk assessment. Environ Res 140: 308-316.
  • Sánchez-Espejo R, Aguzzi C, Cerezo P, Salcedo I, López-Galindo A, Viseras C (2014). Folk pharmaceutical formulations in western Mediterranean: Identification and safety of clays used in pelotherapy. J Ethnopharmacol 155: 918-814.
  • Saner S (1978). Geology and the environments of deposition of Geyve-Osmaneli-Gölpazarı-Taraklı area. Journal of the Faculty of Science of Istanbul University B 43: 63-91.
  • Sawai J (2003). Quantitative evaluation of antibacterial activities of metallic oxide powders (ZnO, MgO and CaO) by conductimetric assay. J Microbiol Methods 54: 177-182.
  • Sherene T (2010). Mobility and transport of heavy metals in polluted soil environment. Biol Forum Int J 2: 112-121.
  • Şimşek Ş (2015). Dünya’da ve Türkiye’de jeotermal gelişmeler. In: III. Geothermal Resources Symposium Proceedings, Ankara, Turkey, pp. 1-17 (in Turkish).
  • Smedley PL, Kinniburgh DG (2002). A review of the source behavior and distribution of arsenic in natural waters. Appl Geochem 17: 517-568.
  • Steinnes E (2009). Soils and geomedicine. Environ Geochem Hlth 31: 523-535.
  • Stoeppler M (1992). Hazardous Metals in the Environment. Amsterdam, the Netherlands: Elsevier.
  • Summa V, Tateo F (1998). The use of pelitic raw materials in thermal centres: mineralogy, geochemistry, grain size and leaching tests. Examples from Lucania area (Southern Italy). Appl Clay Sci 12: 403-417.
  • Szántó Z, Papp L (1998). Effects of the different factors on the ionophoretic delivery of calcium ions from bentonite. J Control Release 56: 239-247.
  • Tateo F, Ravaglioli A, Andreoli C, Bonin F, Coiro, V, Degetto, S, Giaretta, A, Menconi Orsini A, Puglia C, Summa V (2009). The in-vitro percutaneous migration of chemical elements from a thermal mud for healing use. Appl Clay Sci 44: 83-94.
  • Tateo F, Summa V (2007). Element mobility in clays for healing use. Appl Clay Sci 36: 64-76.
  • Temel A, Gündoğ du MN (1996). Zeolite occurrences and erionite- mesothelioma relationship in Cappadocia region, Central Anatolia, Turkey. Miner Deposita 31: 539-547.
  • Turekian KK, Wedephol KH (1961). Distribution of the elements in some major units of the earth’s crust. Geol Soc Am Bull 72: 175-192.
  • US FDA (2003). Environmental Assessment and Risk Analysis Element. White Paper Summary. Bethesda, MD, USA: Food and Drug Administration.
  • United States Pharmacopeia (2010). 33-NF 28. US Pharmacopeial Convention, EUA. Washington, DC, USA: United States Pharmacopeia.
  • Whitney DL, Evans BW (2010). Abbreviations for names of rock- forming minerals. Am Mineral 95: 185-187.
  • WHO (2011). Guidelines for Drinking-Water Quality. 4th ed. Geneva, Switzerland: World Health Organization.
  • Williams LB, Haydel SE (2010). Evaluation of the medical use of clay minerals as antibacterial agents. Int Geol Rev 52: 745-770.