Some Properties of Eucalyptus Wood Flour Filled Recycled High Density Polyethylene Polymer-Composites

The mechanical properties of eucalyptus wood flours (EWF) filled recycled high density polyethylene (HDPE) composites were investigated. First thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis were conducted for recycled HDPE and EWF. Later the effects of EWF and maleic anhydride grafted polyethylene (MAPE) concentrations were studied. TGA analysis revealed that EWF and recycled HDPE started degrading around 230 °C and 280 °C, respectively. Melting temperature of the recycled HDPE was around 129 °C. Mechanical property evaluation showed that the increased concentration of EWF in polymer-composites reduced the tensile, flexural, and impact strength while increased the tensile and flexural modulus. The addition of small amount of MAPE coupling agent improved the tensile and flexural strength but this increase was leveled off at higher concentrations. Impact strength of the composites was reduced by the coupling agent. This study showed that polymer-composites can be manufactured utilizing recycled HDPE and eucalyptus wood flours in the process temperature range of 130-230 °C and could provide additional income for the lumber mills and promote the recycling of HDPE.

Anahtar Kelimeler:

Recycled HDPE, polymer-composites, mechanical properties, coupling agent, TGA, DSC

Some Properties of Eucalyptus Wood Flour Filled Recycled High Density Polyethylene Polymer-Composites

Keywords:

Recycled HDPE, polymer-composites, mechanical properties, coupling agent, TGA, DSC,

PDF

___

Abu-Sharkh B. F., R. Kahraman, S.H. Abbasi and I.A. Hussein. 2004. Effect of epolene E-43 as a compatibilizer on the mechanical properties of palm fiber-poly(propylene) composites. J. Appl. Polym. Sci. 92: 2581-2592.
Bengtsson, M. and K. Oksman. 2006. Silane crosslinked wood plastic composites: Processing and properties. Compos. Sci. Technol. 66: 2177-2186.
Chan, J. H. and S.T. Balke. 1997. The thermal degradation kinetics of polypropylene: Part II. Time-temperature superposition. Polym. Degrad. Stabil. 57: 127-134.
Chen, X.Y., Q.P. Guo and X.L. Mi. 1998. Bamboo fiber reinforced polypropylene composites: A study of the mechanical properties. J. Appl. Polym. Sci. 69: 1891-1897.
Choudhury, A. and B. Adhikari. 2007. Recycled milk pouch and virgin LDPE-LLDPE-based jute fiber composites. Polym. Composite. 28: 78-88.
Clemons, C. 2002. Wood-Plastic Composites in the United States. The interfacing of two industries. Forest Prod. J. 52: 10-18.
Gassan, J. and A.K. Bledzki. 1997. The influence of fiber surface treatment on the mechanical properties of jute-PP composites. Composites Part. A-Appl. S. 28: 1001–1005.
Geng, Y., K. Li and J. Simonsen. 2004. Effect of a new compatibilizer system on the flexural properties of wood-polyethylene composites. J. Appl. Polym. Sci. 91: 3667-3672.
Hornsby, P.R., E. Hinrichsen and K. Triverdi. 1997. Preparation and properties of polypropylene composites reinforced with wheat and flax straw fibers. Part II. Analysis of composite microstructure and mechanical properties. J. Mater. Sci. 32: 1009–1015.
Jana C.J. and A. Prieto. 2002. Natural fiber composites of high- temperature thermoplastics polymers: Effect of coupling agents. J. Appl. Polym. Sci. 86: 2168-2173.
Joseph, K., C. Pavithran and S. Thomas. 1996. Influence of interfacial adhesion on the mechanical properties and fracture behavior of short sisal fiber reinforced polymer composites. Eur. Polym. J. 32: 1243-1250.
Kim, J.P, T.H. Yoon, S.P. Mun, J.M. Rhee and J.S. Lee. 2006. Wood- polyethylene composites using ethylene-vinyl alcohol copolymer as adhesion promoter. Bioresource Technol. 97: 494-499.
Kozlowski, R. and M. Wladka-Pryzbylak. 2008. Flammability and fire resistance of composites reinforced by natural fibers. Polym. Advan. Technol. 19: 446-453.
Lai S.M., F.C. Yeh, Y. Wang, H.C. Chan and H.F. Shen. 2003. Comparative study of maleated polyolefins as compatibilizers for polyethylene/wood flour composites. J. Appl. Polym. Sci. 87: 487- 496.
La Mantia, F.P., M. Morreale and Z.A. Izhak. 2005. Processing and mechanical properties of organic filler-polypropylene composites. J. Appl. Polym. Sci. 96: 1906-1913.
Lei, Y., Q. Wu, C.M. Clemons, F. Yao and Y. Xu. 2007. Influence of nanoclay on properties of HDPE/wood composites. J. Appl. Polym. Sci. 106: 3958-3966.
Li Q. and L.M. Matuana. 2003. Effectiveness of maleated and acryclic acid-functionalized polyolefin coupling agents for HDPE-wood- flour composites. J. Thermoplast. Compos. 16: 551-564.
Lu J.Z., Q. Wu and I.I. Negulescu. 2005. Wood-fiber/high-density- polyethylene composites: Coupling agent Performance. J. Appl. Polym. Sci. 96: 93-102.
Matuana, L.M. and J.J. Balatinecz. 1998. Effect of surface properties on the adhesion between PVC and wood veneer laminates. Polym. Eng. Sci. 38: 765-773.
Matuana L.M., C.P. Park and J.J. Balatinecz. 1998. Cell morphology and property relationships of microcellular foamed PVC/Wood-fiber composites. Polym. Eng. Sci. 38: 1862-1872.
Mengeloglu, F., L.M. Matuana and J. King. 2000. Effects of impact modifiers on the properties of rigid PVC/wood-fiber composites. J. Vinyl. Addit. Techn. 6: 153-157.
Mengeloglu, F. and L.M. Matuana. 2003. Mechanical properties of extrusion foamed rigid PVC/Wood-flour composites. J. Vinyl. Addit. Techn. 9: 26-31.
Mengeloglu F. 2006. Wood/Thermoplastic composites. In: Proceeding of I. Polymer Composite Symposium and Exibition (Eds.:M. Gül and E.S. Umdu) TBMOB Kimya Mühendisleri Odası, İzmir, pp. 471- 480.
Mengeloglu, F., R. Kurt, D.J. Gardner and S. O’neill. 2007. Mechanical properties of extruded high density polyethylene (HDPE)- and polypropylene (PP)- wood flour decking boards. Iran. Polym. J. 16: 477-487.
Mengeloglu, F. and K. Karakus. 2008. Thermal degradation, mechanical properties and morphology of wheat straw flour filled recycled thermoplastic composites. Sensors-Basel. 8: 500-519.
Mwaikambo, L.Y. and M.P. Ansell. 2002. Chemical modification of hemp sisal jute and kopak fibers by alkalization. J. Appl. Polym. Sci. 84: 2222-2234.
Nunez, A.J., P.C. Sturn, J.M. Kenny, M.I. Aranguren, N.E. Marcovich and M.M. Reboredo. 2002. Mechanical characterization of polypropylene-wood flour composites. J. Appl. Polym. Sci. 88: 1420-1428.
Panthapulakkal, S., A. Zereshkian and M. Sain. 2006. Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites. Bioresource Technol. 97: 265-272.
Prasad, B.M. and M.M. Sain. 2003. Mechanical properties of thermally treated hemp fibers in inert atmosphere for potential composite reinforcement. Mater. Res. Innov. 7: 231–238.
Rachtanapun, P., S.E.M. Selke and L.M. Matuana. 2003. Microcellular foam of polymer blends of HDPE/PP and their composites with wood fiber. J. Appl. Polym. Sci. 88: 2842-2850.
Sain, M. and S. Panthapulakkal. 2006. Bioprocess preparation of wheat straw fibers and their characterization. Ind. Crop. Prod. 23: 1–8.
Selke S.E. and J. Childress. 1993. Wood fiber /high-density polyethylene composites: ability of additive to enhance mechanical properties. In: Proceedings of the Wood-fiber/Polymer Composites: Fundamental Concepts, Processes, and Material Options, Forest Products Society: Madison, Wisconsin, USA. p.109.
Stark, N. and Berger M.J. 1997. Effect of species and particle size on properties of wood-flour-filled polypropylene composites. In: Proceedings of the Functional Fillers for Thermoplastics and Thermosets: San Diego, California, pp.1-20.
Vande Velde, K. and P. Keikens. 2001. Thermoplastic polymers; overview of several properties and their consequences in flax fiber reinforced composites. Polym. Test. 20: 885–893.
Wang Y., F.C. Yeh, S.M. Lai, H.C. Chan and H.F. Shen. 2003. Effectiveness of functionalized polyolefins as compatibilizers for polyethylene/wood flour composites. Polym. Eng. Sci. 43: 933- 945.
Woodhams R. T., G. Thomas and D.K. Rodgers. 1994. Wood fibers as reinforcing fillers for polyolefins. Polym. Eng. Sci. 24: 1166- 1171.
Yang H. S., M.P. Wolcott, H.S. Kim, S. Kim and H.J. Kim. 2007. Effect of different compatibilizing agents on the mechanical properties of lignocellulosic material filled polyethylene bio-composites. Compos. Struct. 79: 369-375.
Younguist, J.A., 2005. Unlikely partners? The marriage of wood and nonwood materials. Forest. Prod. J. 45: 25-30.