Abdullah İSTEK, Aziz BİÇER, İsmail ÖZLÜSOYLU

Effect of sodium carboxymethyl cellulose (Na-CMC) added to urea-formaldehyde resin on particleboard properties

This study investigated the effect of sodium carboxymethyl cellulose (Na-CMC) added to urea-formaldehyde (UF) resin on particleboard production and its effects on the properties of the boards. The Na-CMC/UF was prepared at the selected blending levels of 0/100, 5/95, 10/90, 15/85, 20/80, 25/75, 30/70, 35/65, 40/60, 45/55, and 50/50. In the production of test panels, 55% coniferous and 45% broadleaved wood chips were used. The physical and mechanical properties of the particleboard panels were determined and evaluated. According to the results, the addition of Na-CMC at the level of between 5% and 20% improved the internal bond (IB) strength by 6%– 40%. The best IB strength (0.63 N/mm2) was found in the panels with the 20% Na-CMC admixture. Although an increase in bending strength (modulus of rupture-MOR) was observed with an increase in the amount of Na-CMC used, it was found that the bending modulus of elasticity (MOE) was reduced in comparison with the control sample. The lowest MOE was determined as 1451 N/mm2 in the 50% Na-CMC-doped test panels. It was determined that the use of Na-CMC negatively affected the water absorption and thickness swelling values. As a result, it was concluded that UF resin containing up to 20% Na-CMC solution can be used in particleboards produced for applications in which the physical properties are not important.

Keywords:

Sodium carboxymethyl cellulose, particleboard, urea-formaldehyde resin,

PDF

___

[Anonymous], 2012, 325 TS EN .
[Anonymous], 1999, 323 TS EN .
[Anonymous], 1999, 317 TS EN .
[Anonymous], 1999, 319 TS EN .
[Anonymous], 1999, 310 TS EN .
[Anonymous], 1999, 4894120 TS EN .
[Anonymous], 2012, 312 TS EN .
[Anonymous], 1999, 3261 TS EN .
Basta AH, 2004, POLYM-PLAST TECHNOL, V43, P745, DOI 10.1081/PPT-120038063
Cao Y, 2001, ACTA POLYM SIN, P3 .
Colombo, 2000, Pharm Sci Technol Today, V3, P198, DOI 10.1016/S1461-5347(00)00269-8
Ejiogu I.K., 2018, AM J CHEM BIOCHEMICA, V2, P10, DOI [10.11648/j.ajcbe.20180201.12, DOI 10.11648/J.AJCBE.20180201.12]
Eroglu H, 2000, GENEL YAYIN, V200 .
Hematabadi H, 2012, CONSTR BUILD MATER, V28, P743, DOI 10.1016/j.conbuildmat.2011.09.018
Istek A., 2018, Bartin Orman Fakultesi Dergisi, V20, P382
Istek A., 2013, INT CAUC FOR S, P932 .
Kono H, 2014, CARBOHYD POLYM, V106, P84, DOI 10.1016/j.carbpol.2014.02.020
MAMZA PAP, 2014, INT J SCI TECHNOLOGY, V3, P53
OZLUSOYLU I, 2018, TURK J FOREST, V19, P317, DOI DOI 10.18182/tjf.402355
Park BD, 2013, EUR POLYM J, V49, P532, DOI 10.1016/j.eurpolymj.2012.10.029
Qiao ZB, 2014, BIORESOURCES, V9, P6117 .
Rocket FH, 1997, ENCY SCI TECHNOLOGY, V4, P257
Ugwoke MI, 2000, INT J PHARM, V202, P125, DOI 10.1016/S0378-5173(00)00434-8
Zhang JZ, 2011, ADV MATER RES-SWITZ, V150-151, P1135, DOI 10.4028/www.scientific.net/AMR.150-151.1135
Zhu X, 2014, GREEN CHEM SUSTAIN T, P1, DOI 10.1007/978-3-642-54646-4_1