Yüksek performanslı ipliklerden üretilen örme kumaşların mekanik etkilere karşı dayanımlarının incelenmesi

ÖZET: Gelişen teknoloji ile birlikte teknik tekstil ürünleri içerisinde insan vücudunu tehlikeli ortamlarda ko- rumayı sağlayan tekstil yapıları giderek daha fazla önem kazanmaya başlamıştır. Kişinin zararlı maddelerle, kötü çevre koşullarıyla karşılaşma riskini önlemek ve korunmasını sağlamak bu tekstil yapılarının üretilmesinde ana hedef olmuştur. Koruyucu tekstiller, üretim miktarı yönünden teknik tekstiller içerisinde en küçük orandaki uygulama alanı olmalarına rağmen; özellikle gelişmekte olan ülkelerde sanayileşme oranı arttıkça sağlık, gü- venlik ve hijyen alanlarında standartların oluşturulması ve yaptırımların artması ile koruyucu özelliğe sahip giysilere olan talep de artmaktadır. Son yıllarda koruyucu tekstiller alanındaki araştırmalar daha çekici hale gelmiş ve farklı uygulama alanlarında kullanılabilecek farklı özelliklere sahip koruyucu tekstillerin üretimine olanak sağlamıştır. Bu çalışmanın amacı, yüksek performanslı ipliklerden üretilen örme kumaşların mekanik etkilere karşı dayanım özelliklerinin incelenmesidir.

Investigation of mechanical hazard resistance properties of knitted fabrics produced by high performance yarns

ABSTRACT: With the developing technology, textile structures in the technical textile products that protect the human body against hazardous environments began to gain importance. Preventing the risks that include the humans facing with the harmful substances and suffering from the bad environmental conditions and human protection are the main target for the production of these textile structures. Although the protective textiles are one of the application areas which have the lowest production ratio among the technical textiles, the demands for the protective clothing rises as the industrial development increases and new standards and the sanctions are being built up about the health, security and hygiene, especially in the developing countries. In recent years, researches in the field of protective textiles have become more attractive and they have provided to produce the protective textiles with different features in different application areas. The aim of this study is to investigate the mechanical hazard resistance properties of knitted fabrics produced by high performance yarns.

___

  • 1.ITKİB, (2008), Türkiye’de ve Dünya’da Teknik Tekstiller Üzerine Genel ve Güncel Bilgiler, İTKİB Genel Sekreterli- ği, Haziran 2008.
  • 2.Smith, W.C., (1999), An Overview of Protective Clothing - Markets, Materials, Needs, Industrial Textile Associates, USA.
  • 3.Horrocks, A. R., Anand, S.C., (2000), Handbook of Technical Textiles, Woodhead Publishing Ltd., England.
  • 4.Çerkez, İ., (2007), Kolloidal Silika Dispersiyonunun Polieti- len Kumaşların Balistik Performansına Etkisi, Yüksek Li- sans Tezi, Uludağ Üniversitesi, Bursa.
  • 5.Özdemir, F., (2011), Mekanik Risklere Karşı Koruyucu Eldivenlerin Performanslarının İyileştirilmesi Üzerine Ça- lışmalar, Yüksek Lisans Tezi, Ege Üniversitesi, İzmir.
  • 6.Alpyıldız, T., Rochery, M., Kurbak, A., Flambard, X., (2011), Stab and Cut Resistance of Knitted Structures: A Comparative Study, Textile Research Journal, 81(2), 205– 214.
  • 7.Gadow R., Niessen, K., (2006), Lightweight Ballistic with Additional Stab Protection Made of Thermally Sprayed Ceramic and Cermet Coatings on Aramide Fabrics, International Journal of Applied Ceramic Technology, 3(4), 284–292.
  • 8.Harrabi L., Dolez P. I., Vu-Khanh T., Lara J., (2006), Optimization in the Selection of Protective Gloves for Resistance to Mechanical Risks, Second International Conference of Applied Research on Textile (CIRAT 2), Tu- nus.
  • 9.Flambard X, Polo J., (2004), Stab Resistance of Multi- Layers Knitted Structures: Comparison between Para- aramid and PBO Fibers, Journal of Advanced Materials, 36(1), 30-35.
  • 10.Ferreira M., Bourbigot S., Flambard X., Vermeulen B., (2004), Interest of a Compound Yarn to Improve Fabric Performance, Autex Research Journal, 4(1).
  • 11.Flambard X., Ferreira, M.,Vermeulen, B., Bourbigot, S., (2003), Mechanical and Thermal Behaviors of First Choice, Second Choice and Recycled P-aramid Fibers, Journal of Textile and Apparel, Technology and Management, 3(2), 1- 13.
  • 12.Rhodes P.L., Graham,C. O., (1979),Evaluation of Cotton/Kevlar® Blends,Textile ResearchJournal, 49(1),28.
  • 13. Ertekin G., Oğlakcıoğlu, N., Marmaralı, A., (2012), High Tenacity Weft Knitted Fabrics for Protective Garments, 46th IFKT Congress, Romanya.
  • 14. Özdil, N., (2003), Kumaşlarda Fiziksel Kalite Kontrol Yöntemleri, E.Ü. Tekstil ve Konfeksiyon Araştırma- Uygulama Merkezi Yayını, Yayın No:21, ISBN: 975-483- 579-9, Bornova/İzmir.
  • 15. Gürcüm, B. H., (2010), Dokuma Kumaşların Öznel Algısı ile Bazı Fiziksel Özellikleri Arasındaki İlişkinin Belirlenme- si, Tekstil ve Konfeksiyon, 2, 101-108.
  • 16. EN 388 Mekanik risklere karşı koruyucu eldivenler stan- dardı, 2003
  • 17. Tekstil, Hazır Giyim, Konfeksiyon Alt Komisyon Raporu, (2006), Dokuzuncu Kalkınma Planı (2007-2013), Devlet Planlama Teşkilatı Müsteşarlığı, s: 21-22.