___

Ayaz O, Uçar N, Bahar E., Oksuz M., Ucar M., Onen A., Demir A., Wang Y. (2012), "Production And Analysis of Composite Nanofiber And Heat Applied Nanofiber".Tekstil ve Mühendis, 19(85) 6-9.

Çallioğlu, F.C. and Jirsak O. (2013), "The Effect of Polymer and Salt Concentration on Fiber Properties in Electrospinning of Polyurethane Nanofibers" Tekstil ve Mühendis, 20 (90) 1-6.

Lee, H., et al., (2014), A review of recent developments in membrane separators for rechargeable lithium-ion batteries. Energy & Environmental Science, 7(12), 3857-3886.

Zhang, X., et al. (2011), Electrospun nanofiber-based anodes, cathodes, and separators for advanced lithium-ion batteries. Polymer Reviews, 51(3) 239-264.

Erdem, R. and Erdem, Ö., (2017), Investigation the Morphological and Luminescence Properties of Ligand Doped Polyurethane Nanofibers Produced by Electrospinning. Tekstil ve Mühendis 24 (105), 18-24.

Pant, H.R., et al. (2010), Effect of successive electrospinning and the strength of hydrogen bond on the morphology of electrospun nylon-6 nanofibers. Colloids and Surfaces A: Physicochemical and Engineering Aspects,.370(1-3), p. 87-94.

Bagheri, H. and Aghakhani A. (2012), Polyaniline-nylon-6 electrospun nanofibers for headspace adsorptive microextraction. Analytica chimica acta, 713, 63-69.

Beachley, V. and Wen X., (2009) Effect of electrospinning parameters on the nanofiber diameter and length. Materials Science and Engineering: C, 29(3), 663-668.

Pillay, V., et al., (2013), A review of the effect of processing variables on the fabrication of electrospun nanofibers for drug delivery applications. Journal of Nanomaterials.

Son, W.K., et al., (2004), The effects of solution properties and polyelectrolyte on electrospinning of ultrafine poly (ethylene oxide) fibers. Polymer, 45(9), 2959-2966.

Casasola, R., et al., (2014), Electrospun poly lactic acid (PLA) fibres: effect of different solvent systems on fibre morphology and diameter. Polymer 55(18), 4728-4737.

Chuangchote, S., Sagawa T., and Yoshikawa S., (2009), Electrospinning of poly (vinyl pyrrolidone): Effects of solvents on electrospinnability for the fabrication of poly (p-phenylene vinylene) and TiO2 nanofibers. Journal of applied polymer science, 114(5), 2777-2791.

Jarusuwannapoom, T., et al., (2005), Effect of solvents on electro-spinnability of polystyrene solutions and morphological appearance of resulting electrospun polystyrene fibers. European Polymer Journal, 41(3), 409-421.

Choktaweesap, N., et al. (2007), Electrospun gelatin fibers: effect of solvent system on morphology and fiber diameters. Polymer Journal, 39(6), 622-631.

Mit-uppatham, C., Nithitanakul M., and Supaphol P., (2004), Ultrafine electrospun polyamide-6 fibers: effect of solution conditions on morphology and average fiber diameter. Macromolecular Chemistry and Physics, 205(17), 2327-2338.

Yanilmaz, M., Dirican M., and Zhang X, (2014). Evaluation of electrospun SiO 2/nylon 6, 6 nanofiber membranes as a thermally-stable separator for lithium-ion batteries. Electrochimica Acta, 133, 501-508.

Pant, H.R., et al., (2011), Electrospun nylon-6 spider-net like nanofiber mat containing TiO2 nanoparticles: a multifunctional nanocomposite textile material. Journal of hazardous materials, 185(1), 124-130.

Palazzetti, R., Zucchelli A., and Trendafilova I., (2013), The self-reinforcing effect of Nylon 6, 6 nano-fibres on CFRP laminates subjected to low velocity impact. Composite Structures, 106, 661-671.

Shrestha, B.K., et al., (2016), Development of polyamide-6, 6/chitosan electrospun hybrid nanofibrous scaffolds for tissue engineering application. Carbohydrate Polymers, 148,107-114.

Yanilmaz, M., et al., (2017), High-strength, thermally stable nylon 6, 6 composite nanofiber separators for lithium-ion batteries. Journal of Materials Science, 52(9), 5232-5241.

Matulevicius, J., et al., (2016), The comparative study of aerosol filtration by electrospun polyamide, polyvinyl acetate, polyacrylonitrile and cellulose acetate nanofiber media. Journal of Aerosol Science, 92, 27-37.

Huang, L. and McCutcheon J.R., (2014) Hydrophilic nylon 6, 6 nanofibers supported thin film composite membranes for engineered osmosis. Journal of membrane science, 457, 162-169.

Jeong, J., et al., (2006), Fabrication of MWNTs/nylon conductive composite nanofibers by electrospinning. Diamond and related materials, 15 (11-12), 1839-1843.

Choi, J., et al., (2010), MWCNT–OH adsorbed electrospun nylon 6, 6 nanofibers chemiresistor and their application in low molecular weight alcohol vapours sensing. Synthetic Metals, 160 (23-24), 2664-2669.

Navarro-Pardo, F., et al., (2013), Effects on the thermo-mechanical and crystallinity properties of nylon 6, 6 electrospun fibres reinforced with one dimensional (1D) and two dimensional (2D) carbon. Materials, 6(8), 3494-3513.

Li, Y., Huang Z., and Lǚ Y., (2006), Electrospinning of nylon-6, 66, 1010 terpolymer. European polymer journal, 42(7), 1696-1704.

Van der Schueren, L., et al., (2011), An alternative solvent system for the steady state electrospinning of polycaprolactone. European Polymer Journal, 47(6),1256-1263.

Lee, K., et al., (2003), Characterization of nano-structured poly (ε-caprolactone) nonwoven mats via electrospinning. Polymer, 44(4), 1287-1294.

Shawon, J. and Sung C., (2004) Electrospinning of polycarbonate nanofibers with solvent mixtures THF and DMF. Journal of materials science, 39(14), 4605-4613.

Han, S.O., et al., (2008), Electrospinning of cellulose acetate nanofibers using a mixed solvent of acetic acid/water: Effects of solvent composition on the fiber diameter. Materials Letters, 62(4-5), 759-762.

Tungprapa, S., et al., (2007), Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter. Cellulose, 14(6),563-575.

Celebioglu, A. and Uyar T., (2011), Electrospun porous cellulose acetate fibers from volatile solvent mixture. Materials Letters, 65(14), 2291-2294.

Luo, C., Nangrejo M., and Edirisinghe M., (2010), A novel method of selecting solvents for polymer electrospinning. Polymer, 51(7), 1654-1662.

Erdem, R., et al., (2015), The impact of solvent type and mixing ratios of solvents on the properties of polyurethane based electrospun nanofibers. Applied Surface Science, 2015. 334: p. 227-230.

Qi, Z., et al., (2009), Highly porous fibers prepared by electrospinning a ternary system of nonsolvent/solvent/poly (l-lactic acid). Materials Letters, 63(3-4), 415-418.

Nirmala, R., et al., (2010), Effect of solvents on high aspect ratio polyamide-6 nanofibers via electrospinning. Macromolecular research, 18(8), 759-765.

Qian, Y.-F., et al., (2010), Electrospinning of polymethyl methacrylate nanofibres in different solvents. 2010.

Huang, Z.-M., et al., (2004), Electrospinning and mechanical characterization of gelatin nanofibers. Polymer, 45(15), 5361-5368.

Baji, A., et al., (2010), Electrospinning of polymer nanofibers: effects on oriented morphology, structures and tensile properties. Composites science and technology, 70(5), 703-718.

Abbasi, A., et al., (2014), Electrospinning of nylon-6, 6 solutions into nanofibers: rheology and morphology relationships. Chinese Journal of Polymer Science, 32(6), 793-804.