In the study, it was aimed at investigation of the fibre loss performance effects of the 3-thread fleecy raised fabric. With this aim, various samples were obtained by changing the Fleecy-Yarn fibre content, the Face-yarn type, the number of Fleecy-Yarn floating, the Fleecy-Yarn pile length, and finishing process called as main parameters. After the raising process, the raising fastness (in-house term) of these fabrics were evaluated. After tests, the data were statistically analysed by variance analysis (ANOVA) to determine the effect of the main parameters on the fibre loss performance of these raised fabrics. The results showed that Fleecy-Yarn fibre content and finishing process were statistically significant. Consequently, it was determined these parameters could be considered to reach better raising fastness.
Bu çalışmada, şardonlu 3 iplik futter kumaşlarının lif dökülme durumunun araştırılması amaçlanmıştır. Bu amaçla; arka iplik elyaf içeriğ i, ön iplik tipi, arka iplik atlama sayısı ve arka iplik hav uzunluğu ve farklı terbiye işlemleri ana parametre olarak belirlenmiş ve çeşitli numuneler elde edilmiştir. Daha sonra, bu numunelerin şardon haslıkları (kurum içi standart) ölçülmüştür. Testlerden sonra, ana parametrelerin şardon lifi dökülme performasına etkisini belirlemek için varyans analizi (ANOVA) ile istatistiksel olarak analiz yapılmıştır. Sonuçlar, arka iplik elyaf içeriği ve terbiye işleminin istatistiksel olarak anlamlı olduğunu göstermiştir. Sonuç olarak, daha iyi şardon haslığı sonuçları elde etmek için bu parametrelerin göz önüne alınabileceği belirlenmiştir.
___
1. Badr, A. A., El-Nahrawy, A., (2016), Moisture Properties of Raised 3-Thread Fleece Fabric Knitted With Different Face and Fleecy Yarns, Alexandria Engineering Journal Volume 55, Issue 3,September, pp 2881-2892.
2. Güneşoğlu S.,Meriç B.,Güneşoğlu C., (2005), Thermal Contact Properties of 2-Yarn Fleece Knitted Fabrics, Fibres&Textiles in Eastern Europe,Vol .13, s.46-50.
3. Çoruh, E. H., (2004), Investigation of Dimensional Stability of Knitted Fabric, M.Sc. Thesis, Textile Engineering University of Gaziantep.
4. Candan, C., Önal, L., (2002), Dimensional, Pilling, and Abrasion Properties of Weft Knits Made from Open-End and Ring Spun Yarns, Textile Research Journal , vol. 72, no. 2, page 164-169.
5. Güneşoğlu, S., (2005) Sportif Amaçlı Giysilerin Konfor Özelliklerinin Araştırılması, Doktora Tezi, Uludağ Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Ana Bilim Dalı.
6. Gülsevin, N., (2005), Spor Giysilerin Konfor Özellikleri Üzerine Bir Araştırma, Ege Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Ana Bilim Dalı.
7. Tatlı, N.Ö., (2007), Üç İplik Kumaş Yapısının ve Geçirdiği Terbiye İşlemlerinin Yanma Davranışı Üzerine Etkileri, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi Fen Bilinleri Enstitüsü