UÇ BİRLEŞTİRME İŞLEMİ GÖRMÜŞ PAMUK/ELASTAN KARIŞIMLI ÖZLÜ İPLİKLERİN ÖZELLİKLERİNİ ETKİLEYEN PARAMETRELER

Bu çalışmada, bobinleme işleminde uç birleştirme bölgesinin özelliklerini etkileyen parametrelerin belirlenmesi amacıyla, iki farklı büküm katsayısı ve elastan numarası kullanılarak 20 tex iplik numarasında pamuk/elastan karışımlı özlü iplikler üretilmiştir. Elasto uç birleştirme mekanizması ile yapılan denemeler sonucunda uç birleştirme bölgesinin kopma mukavemeti özelliğini, üfleme havası, üfleme süresi, pamuk/elastan karışımlı ipliklerin büküm katsayısı ve elastan numarası etkilemektedir. Kopma uzaması ve uç birleştirme işlemi görmüş ipliğin çapı üfleme havası ve büküm katsayısından etkilenmektedir

PARAMETERS AFFECTING THE PROPERTIES OF THE S PLICED COTTON/ELASTANE BLENDED CORE YARNS

In this study, cotton/elastane blended core yarns in the yarn count of 20 tex with different twist factors and elastane linear densities were produced in order to determine the parameters which affect the properties of the splicing zone in winding process. After several trials, it is observed that the parameters affecting the breaking strength are splicing air pressure, splicing time, twist factor and elastane linear density for cotton/elastane yarns spliced with the elasto-splicer. The parameters which affect breaking elongation and the diameter of the spliced yarn are splicing air pressure and twist factor

___

  • 1. Das A., Ishtiaque S.M., Parida J.R., 2005, “Effect of Fiber Friction, Yarn Twist and Splicing Air Pressure on Yarn Splicing Performance”, Fibers&Polymers, Vol.6(1), pp.72-78.
  • 2. Nawaz M., Farooq A., Tosief M., Shahbaz B., 2005, “Effect of Some Splicing Variables upon Strength Characteristics of Polyester/Cotton Blended Yarns”, Journal of Agriculture & Social Sciences, Vol.1(1) pp35-37.
  • 3. Cheng K.P.S., Lam H.L.I., 2000, “Physical Properties of Pneumatically Spliced Cotton Ring Spun Yarns”, Textile Research Journal, Vol.70(12), pp.1053- 1057 .
  • 4. Das A., Ishtiaque S.M., Nagaraju V., 2004, “Study on Splicing Performance of Different Types of Staple Yarns”, Fibers&Polymers, Vol.5(3) pp.204-208.
  • 5. Cheng K.P.S., Lam H.L.I., 2003, “Evaluating and Comparing the Physical Properties of Spliced Yarns By Regression and Neural Network Analysis”, Textile Research Journal, Vol.73(2), pp.161-164.
  • 6. Lewandowski S., Drobina R., 2004, “Strength and Geometric Sizes of Pneumatically Spliced Combed Wool Ring Spun Yarns”, Fibres and Textiles in East Europe, Vol.12(2), pp.31-37.
  • 7. Cheng K.P.S., Lam H.L.I., 2000, “Physical Properties of Pneumatically Spliced Cotton Ring Spun Yarns”, Textile Research Journal, Vol.70(12) pp.1053- 1057.
  • 8. B. Baykaldi, 2005, “Elastan karışımlı ipliklerin bobinlenmesinde düğümleme işleminin optimizasyonu”, Yüksek Lisans Tezi, İzmir.
  • 9. Baykaldı, B., Taskin, C., 2005, “Bobinleme İşleminde İplik Uç Birleştirme Ayaralarının Önemi”, Tekstil ve Konfeksiyon, Yıl:15(3), s.153-157.
  • 10. Taşkın, C., Baykaldı, B., Gürkan, P., 2006, “Elastan Karışımlı İpliklerin Bobinlenmesinde Havalı ve Su Püskürtmeli Elastosplicer Sistemlerinin Karşılaştırılması”, Tekstil ve Konfeksiyon, Yıl:16(3), s.185-189.
  • 11. Unal P.G., Ozdil N., Taşkin C., 2010, “The Effect of Fiber Properties on the Characteristics of Spliced Yarns: Part I: Prediction of Spliced Yarns Tensile Properties”, Textile Research Journal, Vol.80(5), pp.429-438.
  • 12. Unal P.G., Arikan C., Özdil N, Taşkin C., 2010, “The Effect of Fiber Properties on the Characteristics of Spliced Yarns: Part II: Prediction of Retained Spliced Diameter”, Textile Research Journal, first published on March 11, 2010 (doi:10.1177/0040517510363189) .
  • 13. Unal P.G., Özdil N, Taşkin C., Şenol M.F., 2010, “Farkli Harmanlardan Üretilen Pamuk İpliklerinde Uç Birleştirme Bölgesinin Mukavemet ve Uzama Özelliklerinin Tahminlenmesi”, Tekstil ve Konfeksiyon, Yıl:20(2), s.109-114.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi