Hüseyin Gazi TÜRKSOY, Münevver ERTEK AVCI, Nida YILDIRIM

14671

THE EFFECTS OF PRODUCTION PARAMETERS ON THE PHYSICAL PROPERTIES OF DUAL-CORE SLUB YARNS

Denim is fabric construction which is popular worldwide with its fit, ease and durability and it has evolved significantly in terms of aesthetic and functional properties throughout time to maintain this popularity. Denim fabric manufacturers are in search of different visual and functional properties at all times. In this study, dual-core slub yarns were developed for using as weft yarn in denim fabric structure. Dual-core and slub production techniques were used simultaneously for production of dual-core slub yarns which will use improving elastic and aesthetic properties of denim fabrics. Within the scope of the study, firstly dual-core slub yarn samples called Group-I were produced with different core draft values of EME (Elastomultiester-I.core) and elastane (II.core). The effects of cores’ draft on the properties of dual-core slub yarns such as unevenness, hairiness, tenacity and breaking elongation were investigated with Group-I yarn samples. The breaking elongation values are affected by both EME and elastane core draft factors, while the tenacity is only affected by EME core draft factor. Moreover, in order to examine the effects of slub types, the physical properties of one of the dual-core slub yarn selected from Group I, were compared with equivalent dual-core yarns (having two different version of basic slub and without slub) which called Group II. The results showed that slub types have statistically significant effect on the only unevenness values.
Keywords:

Dual-core Slub, Dual-core slub yarn, Denim fabric.,

PDF

___

  • Referans1. Sinha S.K, Bansal P., Maity S., (2017), Tensile and elastic performance of cotton/lycra core spun denim yarn, Journal of the Institution of Engineers (India): Series E, 98:71-78.
  • Referans2. Bansal P., Maity S., Sinha S.K., (2019), Effects of process parameters on tensile and recovery behavior of ring-spun cotton/lycra denim yarn, Journal of The Institution of Engineers (India): Series E, doi: 10.1007/s40034-019-00133-5.
  • Referans3. Helali H., Dhouib A.B., Msahli S., Cheikhrouhou M., (2012), Influence of dorlastan® draft and yarn count on elastic recovery of the dorlastan® core spun yarns following cyclic test, The Journal of the Textile Institute, 103:378-384.
  • Referans4. Das A, Chakraborty R. (2013), Studies on elastane-cotton core-spun yarns and fabrics: Part I: Yarn characteristics, Indian Journal of Fibre& Textile Research, 38:237-243.
  • Referans5. Singha K. (2012), Analysis of spandex/cotton elastomeric properties: Spinning and applications, International Journal of Composite Materials, 2:11-16.
  • Referans6. Qadir MB, Hussain T, Malik M, Ahmad F, Jeong SH. (2014), Effect of elastane linear density and draft ratio on the physical and mechanical properties of core-spun cotton yarns, The Journal of the Textile Institute, 105:753-759.
  • Referans7. Vuruşkan D, Babaarslan O, Ilhan I. (2011), Effect of production parameters on strength and elongation of the selected yarns containing elastane, Tekstil ve Konfeksiyon, 21:22-29.
  • Referans8. Pourahmad A, Johari MS. (2011), Comparison of the properties of ring, solo, and siro core-spun yarns The Journal of the Textile Institute, 102:540-547.
  • Referans9. Kaynak HK. (2017), Optimization of stretch and recovery properties of woven stretch fabrics, Textile Research Journal, 87:582-592.
  • Referans10. Su CI, Yang HY., (2014), Structure and elasticity of fine elastomeric yarns, Textile Research Journal, 74:1041-1044.
  • Referans11. Sarıoğlu E, Babaarslan O., (2016), A study on physical properties of microfilament composite yarns, Journal of Engineered Fibers and Fabrics, 11:90-98.
  • Referans12. Erez E, Çelik P., (2014), A research on the parameters of the affecting yarn properties of cotton polyester rigid core-spun yarns, Tekstil ve Konfeksiyon, 24:195-201.
  • Referans13. Akankwasa, N. T., Wang, J., Zhang, Y. (2016), Study of optimum spinning parameters for production of T-400/cotton core spun yarn by ring spinning, The Journal of the Textile Institute, 107(4), 504–511.
  • Referans14. Almetwally, A. A., Idrees, M. F. H., Hebeish, A. A., (2014), Predicting the tensile properties of cotton/spandex core-spun yarns using artificial neural network and linear regression models, The Journal of the Textile Institute, 105(11), 1–1229.
  • Referans15. Ertekin, M., & Kırtay, E., (2015). Tensile properties of some technical core spun yarns developed for protective textiles, Tekstil ve Konfeksiyon, 25(2), 104–110.
  • Referans16. Helali, H., Babay Dhouib, A., Msahli, S., (2013). Effect of spandex draft on the rheological modelling of spandex core-spun yarn, The Journal of the Textile Institute, 103(4), 451–457.
  • Referans17. Hua, T., Wong, N. S., Tang, W. M., 2018, Study on properties of elastic core-spun yarns containing a mix of spandex and PET/PTT bi-component filament as core, Textile Research Journal, 88(9), 1065–1067.
  • Referans18. Mahlouj.chi, R., Soltani, P., Johari, M. S., (2012), The effect of spinning parameters on mechanical and physical properties of core-spun yarns produced by the three-strand modified method (TSMM). Fibers and Polymers, 13(7), 923–927.
  • Referans19. Qadir, M. B., Hussain, T., Malik, M., Ahmad, F., Jeong, S. H., (2014). Effect of spandex linear density and draft ratio on the physical and mechanical properties of core-spun cotton yarns, The Textile Institute, 105(7), 753–759.
  • Referans20. Rajendrakumar, K., Thilagavathi, G., (2013), A study on the effect of construction parameters of metallic wire/core spun yarn based knitted fabrics on electromagnetic shielding, Journal of Industrial Textiles, 42(4), 400–416.
  • Referans21. Shanbeh, M., Hasani, H., Manesh, F. Y., (2012), An investigation into the fatigue behavior of core-spun yarns under cyclic tensile loading, Journal of Engineered Fibers and Fabrics, 7(4), 95–103.
  • Referans22. Bouchraiet R., Azzouz B.,Sakli F., (November 2016), Optimization of drafting tension of multifilament “T400” on the dual core spun yarns to enhance the quality of denim stretch fabric, International Conference of Applied Research on Textile, Cirat-7, Hammamet, Tunisia.
  • Referans23. Ute, T. B., (2018), Analysis of mechanical and dimensional properties of the denim fabrics produced with double-core and core-spun weft yarns with different weft densities, The Journal of The Textile Institute, DOI: 10.1080/00405000.2018.1470451.
  • Referans24. Özdil, N., (2008), Stretch and bagging properties of denim fabrics containing different rates of spandex, Fibres & Textiles in Eastern Europe, 16(66), 63–67.
  • Referans25. Zhang, H., Xue, Y., Wang, S., (2006), Effect of filament over-feed ratio on surface structure of rotor-spun composite yarns, Textile Research Journal, 76(12), 922–923.
  • Referans26. Paul, R. . (Ed.), (2015), Denim manufacture, finishing and applications, The Textile Institute Woodhead Publishing Limited, Cambridge, UK.
  • Referans27. Jabbar, A., Tariq, U., Hussain, T., Basit, A., Hai, A., and Zubair, M., (2018), Effect of polyester and elastane linear density on the physical and mechanical properties of dual-core-spun cotton yarns, Journal of Natural Fibers, DOI: 10.1080/15440478.2018.1500338.
  • Referans28. Ertaş O.G., Zervent Ünal B., Çelik N., (2016), Analyzing the effect of the elastane-containing dual-core weft yarn density on the denim fabric performance properties, The Journal of The Textile Institute,107(1),116–126.
  • Referans29. Babaarslan O., Sarioğlu E., Çelik H.İ, Ertek Avci, M., (2018), Denim fabrics woven with dual core-spun yarns, In book: Engineered Fabrics.
  • Referans30. Tantawy, S.E., Sabry, M. and Bakry, M. (2017). The effect of different weft yarn production technique on the pilling property of jeans fabrics, International Design Journal, 7(3),161–169.
  • Referans31. Türksoy, H.G., Yıldırım, N., (2018). Effect of process variables on the properties of dual-core yarns containing wool/elastane, Industria Textile, 69 (5), 352-356.
  • Referans32. Türksoy H.G, Kılıç G., Üstüntağ S., Yılmaz D., (2018), A comparative study on properties of dual-core yarns, The Journal of The Textile Institute, doi: 10.1080/00405000.2018.1534541.
  • Referans33. Lawrence C. A. (Ed.)., (2010), Advances in yarn spinning technology, The Textile Institute Woodhead Publishing Limited, Cambridge, UK.
  • Referans34. Özgen, B., Altaş, S., (2017), Evaluation of air permeability of fabrics woven with slub yarns, Tekstil ve Konfeksiyon, 27(2), 126-130.
  • Referans35. Altaş, S., Ozgen, B., (2015), The effect of slub yarn descriptive parameters and yarn linear density on upholstery fabric abrasion resistance, The Journal of The Textile Institute, 107:10, 1232-1239, DOI: 10.1080/00405000.2015.1100414.
  • Referans36. İlhan İ, Babaarslan O, Vuruşkan D. (2012), Effect of descriptive parameters of slub yarn on strength and elongation properties, Fibres & Textiles in Eastern Europe, 3(92): 33-38.
  • Referans37. Wu., X., Wang, F., Wang, S., (2003), Properties of Wool/PET composite yarns, Textile Research Journal, 73, 4; ProQuest Science Journals p. 305.
  • Referans38. Lin J.H., Chen, A.P., Hsieh, C.T., Lin, C.W., Lin, C.M., Lou, C.W., (2011), Physical properties of the functional bamboo charcoal/stainless steel core-sheath yarns and knitted fabrics, Textile Research Journal, 81(6), 567–573.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi
Arşiv
Sayıdaki Diğer Makaleler

Sena Cimilli DURU, İkilem GÖCEK

Levent İNANÇ, Nazime DOGAN

Hüseyin Gazi TÜRKSOY, Münevver ERTEK AVCI, Nida YILDIRIM

Andrea DOBROSAVLJEVİĆ, Snežana UROŠEVİĆ

Navruz PAKSOY, Onur BALCI, Burcu SANCAR BEŞEN

Peng CUİ, Yuan XUE, Fumei WANG

Serhat ATA, Mehmet Selami YILDIZ, İsmail DURAK