KORUYUCU GİYSİLER İÇİNDEKİ NEFES ALABİLİR MEMBRANLARIN TERMAL YALITIM ÖZELLİKLERİ

Koruyucu giysilerin koruyuculuk ve dayanıklılık özellikleri daha önemli olduğu için konfor, kullanıcılar tarafından göz ardı edilmektedir. Bu durum çalışanların bir müddet sonra iş verimliliğinin düşmesine neden olmaktadır. Son yıllarda iş verimliliğini yükseltmek için, pek çok yöntem denenmiştir. Bu yöntemlerde temel yaklaşım iç konforun sağlanmasına yöneliktir. Ayrıca koruyucu giysilerde termal konfor konusu birçok araştırmacının ilgi odağı olmuştur. Koruyucu giysilerde iç konforu artırmak amacıyla nefes alabilir membranlar kullanılarak nem ve bu neme bağlı buharlaşma ısısının atılması sağlanmaktadır. Bu, vücut ısıl düzenlenmesi (termal regülasyon) için önemli bir husustur. Diğer taraftan nefes alabilir membranların nem geçirgenlik özellikleri yanı sıra termal yalıtım özelliklerinin tespiti de önemlidir. Bu amaçla, bu çalışmada farklı materyallerden ve tabaklardan oluşmuş bu membranların termal yalıtım özellikleri Alambeta cihazında test edilmiş ve sonuçlar grafiklerle karşılaştırılmıştır. Ayrıca bu membranların koruyucu giysi içinde konforu nasıl etkileyebileceği tartışılmıştır. Sonuçlar, koruyucu giysi dizaynında kullanılmaya başlanan nefes alabilir membranların ve gözenekli yapıların ısı ve buhar transferine izin vererek konforu artırmada etkili olabileceğini ortaya koymuştur. Çünkü termal yalıtım özellikleri giysilerin temel fonksiyonunu belirler. Böylece termal giysi konforu, termal yalıtım parametrelerinin analiz edilmesiyle tahmin edilebilir

THERMAL INSULATION PROPERTIES OF BHREATHNABLE MEMBRANS INSIDE OF PROTECTIVE CLOTHING

Comfort is not taken into consideration by users since the protection and strength properties of protective clothing are more important. That results in decreasing the work productivity of workers after a while. In recent years in order to increase the work productivity, many methods have been tried. Basic approaches in these methods are intended to providing comfort inside of clothing. Also, the topic of comfort in protective clothing has been of interest to many researchers. The moisture and evaporation heat with depending on that moisture are provided to reject by using breathable membranes with the aim of increasing comfort inside of protective clothing. This is an important case for regulation of body heat (thermal regulation). On the other hand determinations of thermal insulation properties are important as well as moisture permeability properties of breathable membranes. For this purpose, in this study thermal insulation properties of those membranes which consist of different materials and layers were tested on Alambeta device and the results were compared with graphics. Also it was discussed how those membranes will be able to effect the comfort inside of protective clothing or not. The results showed that breathable membranes and porous structures which are begun to use in designing protective clothing will be able to effective on incresing the comfort by allowing heat and vapour transfer between the clothing layers. Because the thermal insulation properties determine the elemantary function of apperals. Therefore, thermal clothing comfort can be estimated with analysing thermal insulation parameters

___

  • 1. Andersson, C.J., 1999, “Relationships Between Physical Textile Properties and Human Comfort During Wear Trials of Chemical Biological Protective Garment Systems”, Master of Science in Textiles and Clothing, University of Alberta, Spring ,pp. 24-30.
  • 2. ASHRAE, 1993, “Fizyolojik İlkeler ve Isıl Konfor”, Ashrae Temel El Kitabı, Bölüm 8.
  • 3. Atmaca, İ., Kaynaklı, Ö., Yiğit, A., 2005, “Çeşitli Metabolik Aktivite Düzeyleri İçin Isıl Konfor ve Üretkenliğin Sürekli Rejim Enerji Dengesi Modeli İle Değerlendirilmesi”, Isı Bilimi ve Tekniği Dergisi, Sayı: 25 (1), s. 1-16.
  • 4. Frydrych, I., Dziworsko, G., Bilska, J., 2002, “Comparative Analysis of the Thermal Insulation Properties of Fabrics made of Natural and Man-Made Cellulose Fibres”. Fibres&Textiles in Eastern Europe, October, December, pp. 40-44.
  • 5. Hes, L., Offerman, P., Duorokova, I., 2005, “The effect of underwear on thermal contact feeling caused by dressing up and wearing of garments”, Technical University of Lierec, Czech Republic.
  • 6. Frydrych, I., Sybliljka, W., Jasinska, I., 2006, “Termoinsulation parameters of membrane and wool type fabrics”, 3rd European Conference on Protective Clothing (ECPC) and NOKOBETEF, 10-12 May, Poland.
  • 7. Matusiak, M., 2006, “Investigation of the Thermal Insulation Properties of Multilayer Textiles”, Fibres&Textiles in Eastern Europe Januray, December, Vol 14, No.5(59), pp. 98-102.
  • 8. Horrocks, A., Anand, S. vd., 2003, “Teknik Tekstiller El Kitabı”, Türk Tekstil Vakfı, İstanbul, Bölüm 16, s. 474-475.
  • 9. Cireli, A. ve Sarıışık, M., 2000, “Koruyucu Giysilerde Termal, Biyolojik, Fiziksel, Kimyasal Test Yöntemleri ve değerlendirmeleri”, Tekstil&Teknik Dergisi, Temmuz sayısı, s. 120-128.
  • 10. http://www.kanfor.pl/site/index.php?m=showzaw3&id=5&lang=uk, Erişim tarihi 07.01.2009.
  • 11. (http://www.iwp.com.pl/), Erişim tarihi 20.06.2007.
  • 12. Gunesoğlu, S., Meric, B. Ve Gunesoğlu, C. 2005, “Thermal Contact Properties of 2-Yarn Fleece Knitted Fabrics”, Fibres&Textiles in Eastern Europe, April-June, Vol.13, No.2, p 50.
  • 13. Hes, L., 2002, “Recent Developments in the Field of Users Friendly Testing of Mechanical and Comfort Properties of Textile Fabrics and Garments”, World Congress of the Textile Institute, Cario.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi