DİKİM BANDINDA SİMULASYONLA BANT DENGELEME

Bu çalışmanın amacı konfeksiyon işletmelerinde simülasyon metoduyla bant dengelemeyi gerçekleştirmektir. İlk olarak pantolon dikim bandında iş zaman etüdü yapılmıştır. Daha sonra, toplanan veri dağılım uygunluğu ve teorik dağılımlara uygunluk için Kolmogorov-Smirnov testine tabi tutulmuştur. Ardından modeli kurmak için, elde edilen verilere ait dağılımlar simülasyon modeline transfer edilmiştir. Model kurulduktan sonra çalıştırılmış ve modelin geçerliliği gerçek sistem ile karşılaştırılarak sınanmıştır. Modeli kurmak için ENTERPRISE DYNAMICS simülasyon programı kullanılmıştır

Anahtar Kelimeler:

Pantolon dikim hattı, Simülasyon, Modelleme, Konfeksiyon

LINE BALANCING BY SIMULATION IN A SEWING LINE

The aim of this study is to show line balancing in a clothing manufacturing by simulation. To do this, firstly a detailed work and time studies were done among the line. Secondly, collected data was tested for distribution fit and Kolmogrov-Smirnov test for goodness of fit. Then, to set up the model, all fitted data gathered from the line was transferred to simulation model. As soon as the model was set up, it was run. The verification of model was done by comparing with the actual system. To set up the model, Enterprise Dynamics simulation program was used

Keywords:

Pants sewing line, Simulation, Modelling, Clothing manufacturing,

PDF

___

1. Kursun, S., 2008, “Konfeksiyon İşletmelerinde Benzetimin Önemi”, Konfeksiyon Teknik, 164.
2. Glock, R. E., Kunz, G. I., 1995, Apparel Manufacturing-Sewn Product Analysis, Prentice Hall, New Jersey, 4.
3. Caputo A. C. and M. Palumbo, 2005, “Manufacturing re-insourcing in the textile industry: A case study”, Industrial Management & Data Systems, Vol.105 No.2, s: 193-207.
4. Cooklin, G., 1991, Introduction to Clothing Manufacturing, Blackwell Science, Oxford, 104.
5. Tyler, D.J., 1991, Materials management in clothing production, BSP Professional Books Press, London,
6. Chuter, A.J., 1988, Introduction to Clothing Production Management, Blackwell Science, Oxford, 60-63, 57
7. Kayaalp, İ., Erdoğan, M.Ç., 2009, “Konfeksiyon İşletmesinde Dikiş Hatalarının İstatistiksel Proses Kontrol Yöntemlerini Kullanarak Azaltılması”, Tekstil ve Konfeksiyon,Vol:19 (2), s:169-174.
8. Cocks, S., Harlock, S., 1989, “Computer-aided Simulation of Production in the Sewing Room of a Clothing Factory”, J. Text.Inst., Vol. 80, s: 455-463.
9. Rajakumar, S., Arunachalam, V. ve Selladurai, V., 2005, “Simulation of workflow balancing in assembly shopfloor operations”, J. of Manufacturing Technology Management, Vol.16, 265-281.
10. Fozzard, G., Spragg, J., ve Tyler, D.,1996. “Simulation of flow lines in clothing manufacture:Part 1: model construction”, Int. J. of Clothing Science and Technology, Vol. 8, s:17-27.
11. Zielinski, J. ve Czacherska, M., 2004, “Optimisation of the Work of a sewing team by using simulation”, Fibres&Textiles in Eastern Europe, Vol. 12, s: 78-83.
12. Güner M.,Ünal C., 2008. “Line Balancing in the Apparel Industry Using Simulation Techniques”, Fibres& Textiles in the Eastern Europe, Vol. 16, No.2, s: 75-78.
13. Ünal C., Tunalı S., Güner M., 2010. “Evaluation of Alternative Line Configurations in Apparel”, Textile Research Journal, Vol 79, s: 908–916.
14. Kurşun,S. Kalaoğlu, F. 2009 "Simulation of Production Line Balancing in Apparel Manufacturing", Fibers&Textiles in Eastern Europe, Vol. 17, s. 68-71.
15. Kurşun,S., Dinçmen, M., Kalaoğlu, F. 2009. "Production Line Modelling in Clothing Industry by Simulation", Tekstil, Vol. 58, No. 5, s. 186-195.
16. Kursun,S. Kalaoglu,F., Bahadır, C., Gocek, , İ. "A Study of Assembly Line Balancing Problem in Clothing Manufacturing by Simulation,", 2007, 16th IASTED International Conference on Applied Simulation and Modelli, Palma De Mallorca, Spain.
17. Chan, K., Hui, P. ve diğ., 1998, “Handling the assembly line balancing problem in the clothing industry using a genetic algorithm”, Int. J. of Clothing Science and Technology , Vol. 10, 21-37.
18. Niebel B., 1976, Motion and time study, III. R. D. Irwin, Homewood.
19. Law, A.M. ve Kelton, W.D., 1982, Simulation Modeling and Analysis, McGraw-Hill Publishing, Newyork, s:281.
20. H.D. Brunk, 1960, An Introduction to Mathematical Statistics, Ginn.
21. Incontrol Simulation Software B.V, 2003, Enterprise Dynamics Tutorial, Netherland.