Ezgi KURTULMUŞ, Hayrettin BÜYÜKCANGAZ, Hayrettin KUŞÇU, Ali Osman DEMİR

The Hydraulic and Economic Performance Analysis of On-Demand Pressurized Irrigation Systems: A Case Study in Turkey

In this study, COPAM (Combined Optimization and Performance Analysis Model) software revealing optimum design possibilities and performance analysis of pressurized irrigation systems, was applied to on-demand pressurized irrigation system in Uludag University Agricultural Application and Research Centre, Bursa, Turkey. The system reliability, hydrant pressure heads, upstream elevation, discharges and pipe diameters related to this irrigation system were analyzed with COPAM software which have a variety of analysis tools. Analysis results showed that there were no deficiencies of performance in the hydrant level of the examined system. Furthermore, pipe diameters of the existing irrigation network were recalculated.

Keywords:

Irrigation system performance; Hydrants characteristics; System reliability; Cost analy,

PDF

___

Ait Kadi M, Abdellaoui R, Oulhaj A & Essafi B (1990). Design of large-scale collective sprinkler irrigation projects for on demand operation: A holistic approach. In: Proceedings of the 14th International Congress on Irrigation and Drainage, 30 April-04 May, Rio de Janeiro, Brazil, pp. 59-78
Akyol A (2012). Basınçlı sulama şebekesinde proje debisi hesaplamasına ilişkin yöntem karşılaştırması. Yüksek lisans tezi, Ege Ünivesitesi Fen Bilimleri Enstitüsü (Basılmamış), İzmir
Barutçu F & Özcan T M (2011). Basınçlı sulama sistemlerinde değişken hızlı pompalarla enerji kazanım olanaklarının araştırılması. Çukurova Üniversitesi Fen ve Mühendislik Bilimleri Dergisi 26(1): 196-208
Beyribey M & Balaban A (1992). Basınçlı sulama dağıtım sistemlerinin optimizasyonu. Ankara Üniversitesi Ziraat Fakültesi Yayınları, No: 1248, Ankara
Calejo M J, Lamaddalena N, Teixeria J L & Pereira L S (2008). Performance analysis of pressurized irrigation systems operating on-demand using flow-driwen simulation models. Agricultural Water Management 95: 154-162
CTGREF (1979). Programme ICARE-Calcul des Caractéristiques Indicées. Note Technique 6, CTGREF Division Irrigation, Aix-en-Provence
Estrada C, González C, Aliod R & Paño J (2009). Improved pressurized pipe network hydraulic solver for applications in irrigation systems. Journal of Irrigation and Drainage Engineering 135(4): 421430
Labye Y (1981). Iterative discontinuous method for networks with one or more flow regimes. In: Proceedings of the International Workshop on Systems Analysis of Problems in Irrigation, Drainage and Flood Control. 30 November-14 December, New Delhi, pp. 31-40
Lamaddalena N (1997). Integrated simulation modeling for design and performance analysis of on-demand pressurized irrigation systems. PhD Thesis, Technical University of Lisbon, Portugal
Lamaddalena N & Sagardoy J A (2000). Performance analysis of on-demand pressurized irrigation systems. FAO Irrigation and Drainage Paper No: 59, Roma
Lamaddalena N & Khila S (2012). Energy saving with variable speed pumps in on-demand irrigation systems. Irrigation Science 30: 157-166
Pérez P C, Alandi P P, Alvarez F O & Martin Benitez M T (2002). Management and over-exploitation risk of water resources in semi-arid zones. Annual International ASAE Meeting Presentation, Paper No: 022192
Planells P, Tarjuelo J M, Ortega F & Casanova I (2001). Design of water distribution networks for on-demand irrigation. Irrigation Science 20: 189-201
Rossman L (2000). Epanet 2 user’s manual. Environmental Protection Agency, Cincinnati