Mansour RASEKH, Hadi BAGHERI, Mohammad Hossien KIANMEHR, Shahriar KOURAVAND

Mercimek ve Yabani Yulaf Tohumlarının Kimi Fiziksel Özellikleri ve Gravite Masa Selektörü ile Yabani Yulaf Tohumlarının Mercimek Tohumlarından Ayrılmasını Etkileyen Özellikler Üzerine Bir Araştırma

Bu çalışmada, mercimek ve yabani yulaf tohumlarının 1000 tane ağırlığı, gerçek yoğunluğu, porozitesi ve statik sürtünme katsayıları belirlenmiştir. Yabani yulaf tohumlarının mercimek tohumlarından ayrılmasında gravite masa selektörü kullanılmıştır. Gravite masa selektörü ayarlanabilir boylam açısı, enlem açısı, amplitüd titreşim, titreşim frekansı ve hava hızı olmak üzere 5 özelliğe sahiptir. Yabani yulaf tohumunun mercimek tohumundan ayrılmasını en iyi hale getirmek üzere bu özelliklerin etkisi araştırılmıştır. Çalışmadan elde edilen sonuçlar masaya göre enlem açısının 0.5° ila 1°, boylam açısının ise 1.5° ila 2° artırılmasının yabani yulaf tohumlarının mercimek tohumlarından ayrılmasını artırdığını göstermiştir. Boylam açısının 2°, enlem açısının 1°, amplitüd titreşimin 5 mm, titreşim frekansının 400 titreşim dak-1 ve hava hızınıın 5.7 m s-1 olması durumunda ayırma % 37 olmuştur. Sonuç olarak; en uygun amplitüd titreşim ve hava hızı ayarları belirlendikten sonra enlem ve boylam açı bilgileri Datafit programı kullanılarak yabani yulaf tohumlarının mercimek tohumlarından ayrılmasında matematik ilişkiler hesaplanmıştır.

Anahtar Kelimeler:

Gravite selektörü, Fiziksel özellikler, Mercimek, Yabani yulaf

A Study of Some Physical Properties of Lentil and Wild Oat Weed and Parameters Affecting the Separation of Wild Oat Weed from Lentil by a Gravity Table Separator

The present study measured physical properties of lentil and wild oat weed; mass of 1000 seeds, true density, porosity and coefficient of static friction. A gravity table separator was used to separate wild oat weeds from lentil seeds. The gravity table separator had five adjustable parameters; longitudinal slope, latitudinal slope, amplitude of oscillation, frequency of oscillation and air velocity. The effect of these parameters was investigated in order to maximize the separation of wild oat weed from lentil. Results of tests indicated that an increase in latitudinal slope of the table from 0.5° to 1° and longitudinal slope from 1.5° to 2° resulted in increased separation of wild oat weed from lentil. At longitudinal slope of 2°, latitudinal slope of 1°, amplitude of oscillation of 5 mm, frequency of oscillation of 400 cycles min-1, and air velocity of 5.7 m s-1, the separation percentage was 37%. Finally, after determination of the most suitable settings for amplitude of oscillation and air velocity; using the information on longitudinal slope, latitudinal slope and frequency of oscillation of the table was used to calculate mathematical relations of separation percentage of wild oat weed from lentil clumps using Datafit Software

Keywords:

Gravity separator, Physical properties, Lentil, Wild oat,

___

Amin M N, Hussein M A & Roy K C (2004). Effects of moisture content on some physical properties of lentil seeds. Journal of Food Engineering 65(1): 83-87
Aydin C (2003). Physical properties of almond nut and kernel. Journal of Food Engineering 60(3): 315-320 Bagherpour H, Minaei S & Khoshtaghaza M H (2010).
Selected physico-mechanical properties of lentil seed. International Agrophysics 24(1): 81-84
Coskuner Y & Karababa E (2007). Some physical properties of flax seed (Linum usitatissimum L.). Journal of Food Engineering 78(3): 1067-1073
Dhuppar P, Gupta A & Rao D S (2013). Chemical weed management in lentil. Indian Journal of Weed Science 45(3): 189-191
Falconer A (2003). Gravity separation: Old technique/ new methods. Physical Separation in Science and Engineering 12(1): 31-48
Gupta R K, Gopika A & Sharma R (2007). Aerodynamic properties of sunflower seed. Journal of Food Engineering 79(3): 899-904
Hollatz B & Quick G R (2003). Combine tailings returns, part 1: the effects of combine performance and settings on tailings. In: e- Proceedings of the International Conference on Crop Harvesting and Processing. Kentucky USA. ASAE Publication Number 701P1103e. St Joseph, Mich. ASAE
Innocentini M D M, Barizan W S, Alves M N O & Pisani Jr R (2009). Pneumatic separation of hulls and meats from cracked soybeans. Food and Bioproducts Processing 87(4): 237-246
Jannatizadeh A, Naderi Boldaji M, Fatahi R, Ghasemi Varnamkhasti M & Tabatabaeefar A (2008).
Some postharvest physical properties of Iranian apricot (Prunus armeniaca L.) fruit. International Agrophysics 22(2): 125-131
Joshi M, Aldred P, McKnight S, Panozzo J F, Kasapis S, Adhikari R & Adhikari B (2013). Physicochemical and functional characteristics of lentil starch. Carbohydrate Polymers 92(2): 1484-1496
Kashi M (2009). Investigate the possibility of separation the wheat from wild oats by gravity separator. Master’s Thesis, Ardebil University (Unpublished), IRAN
Kaur S, Cogan N, Stephens A, Noy D, Butsch M, Forster J & Materne M (2014). EST-SNP discovery and dense genetic mapping in lentil (Lens culinaris Medik.) enable candidate gene selection for boron tolerance. Theoretical and Applied Genetics 127(3): 703-713
Konak M, Carman K & Aydin C (2002). Physical properties of chick pea seeds. Biosystems Engineering 82(1): 73-78
Mohsenin N N (1986). Physical Properties of Plant and Animal Materials. Gordon and Breach Science Publishers, New York
Mollazade K, Ahmadi H, Khorshidi J, Rajabipour A & Mohtasebi S S (2009). Moisture-dependent physical and mechanical properties of cumin (Cuminum cyminum L.) seed. International Journal of Agricultural and Biological Engineering 2(2): 49-56
Mwithiga G & Sifuna M M (2006). Effect of moisture content on the physical properties of three varieties of sorghum seeds. Journal of Food Engineering 75(4): 480-486
Owolarafe O K, Olabige M T & Faborode M O (2007). Physical and mechanical properties of two varieties of fresh oil palm fruit. Journal of Food Engineering 78(4): 1228-1232
Perez E E, Crapiste G H & Carelli A A (2007). Some physical and morphological properties of wild sunflower seeds. Biosystems Engineering 96(1): 41- 45
Rasekh M (2006). Effective parameters in gravity separator apparatus of sunn pest-damaged wheat. Faculty of Agriculture, Tarbiat Modares University, Tehran, IRAN
Reddy B S & Chakraverty A (2004). Physical properties of raw and parboiled paddy. Biosystems Engineering 88(4): 461-466
Sonawane S P, Sharma G P, Thakor N J & Verma R C (2014). Moisture-dependent physical properties of kokum seed (Garcinia indica Choisy). Research in Agricultural Engineering 60(2): 75-82
Varnamkhasti M G, Mobli H, Jafari A, Keyhani A R, Soltanabadi M H, Rafiee S & Kheiralipour K (2008). Some physical properties of rough rice (Oryza sativa L.) grain. Journal of Cereal Science 47(3): 496-501