DELME HIZI VE BASKI KUVVETİNİN ENERJİ TÜKETİMİNE ETKİSİNİN ARAŞTIRILMASI

Artan sanayileşme ve madenciliğin gelişmesiyle beraber dünyada son yıllarda sondaj çalışmaları artmıştır. Madencilikte birçok amaçla kaya birimlerinde delikler delinmektedir. Kayaların farklı ekipmanlarla delinmesi esnasında makinelerin performansına birçok faktör etki etmektedir. Araştırmacılar daha verimli bir delme işlemi için, bu faktörler içeresinden, değiştirilebilir parametreler üzerinde çalışmalar sürdürmektedirler. Delinebilirlik analizlerinde delme hızı önemli bir göstergedir. Kaya madde ve kütlesinde verimli bir delmenin gerçekleştirilebilmesi için, delme hızının genelde yüksek olması arzu edilir. Fakat delme hızının artması için uygulanan prosedürler tüketilen enerjinin de artmasına neden olmaktadır. Bu nedenle, delme işleminde enerji tüketiminin daha önceden tahmin edilebilmesi maden projeleri için büyük önem arz etmektedir. Bu çalışmada, yedi farklı kaya biriminde 11 farklı baskı kuvvetinde ve dört farklı dönme hızında delme deneyleri gerçekleştirilmiştir. Delme deneyleri soncunda elde edilen verilerle güç tüketimlerinin değişimi araştırılmıştır. Ayrıca, delme hızıyla enerji tüketimi arasında ilişkiler değerlendirilerek bazı eşitlikler geliştirilmiştir.

Investigation on the Effect of Drilling Speed and Pressure Force on Energy Consumption

With increasing industrialization and the development of mining, drilling work has increased in recent years in the world. In mining, holes are drilled in rock for many purposes. Many factors influence the performance of the machines during drilling of the rocks with different equipment. Researchers continue to work on changeable parameters, including these factors, for a more efficient drilling operation. In drillability analysis, drilling speed is an important indicator. It is desirable that the drilling speed is generally high so that efficient drilling can be achieved in the rock material. But the procedures applied to increase the drilling speed cause the exhausted energy to increase. For this reason, it is very important for the mining projects that the energy consumption can be predicted beforehand in the drilling process. In this study, drilling experiments were carried out in seven different rock units at 11 different pressing forces and at four different rotational speeds. The change in power consumption obtained from drilling experiments was investigated. In addition, some equations have been developed by evaluating the relationship between drilling speed and energy consumption

___

  • ADITC, 2015. Australian Drilling Industry Training Committee Limited. “The Drilling Manuel, Fifty Edition”, CRC Press Taylor & Francis Group,
  • Bilim, N., Dündar, S., Kekeç, B., Dursun, A.E. 2017. Investigation of the Effect of Drill Bit Rotation Speed on the Sustainable Drilling. Proceeding of 8th International Conference on Sustainable Development in the Minerals Industry (SDIMI 2017). 25-28 June 2017, Beijing, China, 206-210.
  • Bilim N., 2011. Determination of Drillability of Some Natural Stones and Their Association with Rock Properties, Sci. Res. Essays, vol, 6, 382 - 387.
  • Ekincioglu, G., Altindag, R., Sengun, N., Demirdag, S., Guney, A. 2013. Investigation of the Relationships between Drilling Rate Index (DRI), Physico-mechanical Properties and Specific Cutting Energy for Some Carbonates Rocks. ISRM International Symposium - EUROCK 2013, 23- 26 October, Wroclaw, Poland.
  • El Kacimi, Y., Azaroual, M. A., Touir, R., Galai, M., Alaoui, K., Sfaira, M., ... & Kaya, S. (2017). Corro-sion inhibition studies for mild steel in 5.0 M HCl by substituted phenyltetrazole. Euro-Mediterr J En-viron Integr, 2(1), 1.
  • Karaman, E, 2008. Sert kayaçlarda delinebilirlik tayini. Yüksek Lisans Tezi, Dokuz Eylül Üniversitesi, Fen Bilimleri Enstitüsü, 56s.
  • Pathinkar A.G., Misra G.B., 1976. A Critical Appraisal of the Prodotyakonov Index, International Journal Of Rock Mechanics& Mining Scienes, vol, 13, 249 - 251.
  • Protodyakonov M.M., 1963. Mechanical Properties and Drillability of Rocks, Proceedings of the 5th Symposium Rock Mechanics, Minnesota, USA, 103-118.
  • Rabia H., 1985. Oilwell Drilling Engineering: Principles and Practise, Graham & Tromtman, Huddersfield, England, 322 s.
  • Rais, K., Kara, M., Gadri, L., Hadji, R., Khochman, L. 2017. Original approach for the drilling process optimization in open cast mines; case study of kef essenoun open pit mine northeast of Algeria. Mining Science, vol. 24, 2017, 147−159.
  • Shaabani, E., Rezaeian, M., Moein, M.J.A., Maarefvand, P. Experimental investigation into rate of penetration in carbonated rocks. International Journal of Oil Gas and Coal Technology. Vol: 11, issue:4, 339-349.
  • Taheri A., Qao Q. & Chanda E., 2016. Drilling penetration rate estimation using Rock Drillability Characterization index, Journal of The Institution of Engineers (India), serie D, 1 – 12
  • Tamrock, 1987. Handbook of Underground Drilling, Tamrock Drills SF-33310 Tampere, Finland, 327 s.
  • Tandanand S., Unger H.F., 1975, Drillability Determination A Drillability Index of Percussive Drills, US Bureau of Mines, RI 8073
  • Zahri, F., Boukelloul, M. L., Hadji, R., & Talhi, K., (2016). Slope stability analysis in open pit mines of Jebel Gustar career, NE Algeria, multisteps approach. Mining Science, 23, 137-146.