Üretim Ortamında FUCOM Yönteminin Bulanık Uygulamaları

Geleneksel üretim yöntemleri yeni geliştirilen yüksek dayanımlı, hassas / kırılgan ve karmaşık şekilli parçaların işlenmesinde sınırlıdır. Bu tür parçaları işlemek için konvansiyonel olmayan üretim yöntemleri gereklidir. İş parçası için en uygun üretim yöntemini seçmek hayati bir karar verme problemidir ve bu problemin çözümü günümüz üreticileri için çok önemlidir. Bu çalışmada, üç farklı FUCOM metodu bulanık TOPSIS ve bulanık WASPAS teknikleri ile birleştirildi. Bu geliştirilen yöntemleri test etmek için literatürden geleneksel olmayan imalat yöntemlerinin seçimi bir vaka çalışması olarak alınmıştır. Modelin başarılı sonuçlar verdiği görülmüştür.

Fuzzy applications of FUCOM method in manufacturing environment

Conventional manufacturing methods are limited in the machining of newly developed high strength, precision / brittle and complexshaped parts. Non-conventional manufacturing methods are required to machine such parts. Choosing the most suitablemanufacturing method for the part is a vital decision-making problem and the solution of this problem is very important for today'smanufacturers. In this study, three different Full Consistency Method (FUCOM) methods were combined with fuzzy Techniquefor Order Preference by Similarity to Ideal Solution method (fuzzy TOPSIS) and fuzzy weighted aggregated sum productassessment (fuzzy WASPAS) techniques. In order to test these developed methods, the selection of non-traditional manufacturingmethods from the literature was taken as a case study. It is seen that the model produced successful results.

PDF

___

[1] Roberts, R. and Goodwin, P., “Weight approximations in multi-attribute decision models”, J. Multicrit. Decis. Anal.,11: 291–303, (2002).
[2] Solymosi, T. and Dompi, J., “Method for determining the weights of criteria: The centralized weights”, Eur. J. Oper. Res., 26: 35–41, (1985).
[3] Cook,W.D. “Distance-based and ad hoc consensus models in ordinal preference ranking”. Eur. J. Oper. Res., 172: 369–385, (2006).
[4] Weber, M. Borcherding, K., “Behavioral influences on weight judgments in multiattribute decision making”, Eur. J. Oper. Res., 67: 1–12, (1993).
[5] Zhu, G.N., Hu, J., Qi, J., Gu, C.C., Peng, J.H., “An integrated AHP and VIKOR for design concept evaluation based on rough number”, Adv. Eng. Inform,. 29: 408–418, (2015).
[6] Zavadskas, E.K.,Govindan, K., Antucheviciene, J.,Turskis, Z. “Hybrid multiple criteria decision-making methods: A review of applications for sustainability issues”. Econ. Res.-Ekonomska Istraživanja, 29: 857– 887, (2016).
[7] Madić, M., Radovanović, M., Petković, D., “Nonconventional machining processes selection using multiobjective optimization on the basis of ratio analysis method”,Journal of Engineering Science and Technology, (10)11: 1441-1452, (2015).
[8] Khandekar, A. V., Chakraborty, S., “Application of fuzzy axiomatic design principles for selection of nontraditional machining processes”, International Journal of Advanced Manufacturing Technology, 83(1-4): 529- 543, (2016).
[9] Roy, M. K., Ray, A., Pradhan, B. B., “Non-traditional machining process selection-an integrated approach”, International Journal for Quality Research, 11(1): 71- 94, (2017).
[10] Boral, S., Chakraborty, S., “A case-based reasoning approach for non-traditional machining processes selection”, Advances in Production Engineering & Management, 11(4): 311-323, (2016).
[11] Chen, S.J., and Hwang, C.L., Fuzzy Multiple Attribute Decision Making, Springer-Verlag, (1992).
[12] Zadeh, L., “The concept of a linguistic variable and its applications to approximate reasoning”, Inform Sciences, Part I (No. 8), 199–249, (1975).
[13] Carlsson, C., and Fullér, R., “Fuzzy multiple criteria decision making: Recent developments”, Fuzzy Set Syst, 78(2): 139-153, (1996).
[14] Ribeiro, R.A.,”Fuzzy multiple attribute decision making: A review and new preference elicitation techniques”, Fuzzy Set Syst, 78(2): 155-181, (1996).
[15] Triantaphyllou, E., and Lin, C.T., “Development and evaluation of five fuzzy multiattribute decision-making methods”, Int J Approx Reason, 14(4): 281-310, (1996).
[16] Abdullah, L., “Fuzzy Multi Criteria Decision Making and its Applications: A Brief Review of Category”, Procedia -Social and Behavioral Sciences, 97: 131-136, (1996).
[17] Atanassov, K.T., “Intuitionistic Fuzzy Sets”, Fuzzy Set Syst, 20: 87-96, (1986).
[18] Yager, R.R.,On The Theory of Bags, Int J Gen Syst, 13(1): 23-37, (1986).
[19] Torra, V., Hesitant fuzzy sets, Int J Intell Syst, 25(6): 529-539, (2010).
[20] Xu, Z., Hesitant Fuzzy Sets Theory, Springer, (2014).
[21] Rodriguez, R.M., Martinez, L., and Herrera, F., “Hesitant Fuzzy Linguistic Term Sets for Decision Making, Fuzzy Systems, IEEE Transactions on, 20(1): 109- 119, (2012).
[22] Chen, S., and Hwang, C.L., Fuzzy Multiple Attribute Decision Making Methods and Applications, SpringerVerlag, (1992).
[23] Ye, F., and Li, Y.N., “An extended TOPSIS model based on the Possibility theory under fuzzy environment”, Knowl-Based Syst, 67:263-269, (2014).
[24] Kahraman, C., Çevik, S., Ates, N.Y., and Gülbay, M., “Fuzzy multi-criteria evaluation of industrial roboticsystems”, Computers and Industrial Engineering, 52(4): 414-433, (2007).
[25] Chen, C.B., and Wei, C.C., “An approach for solving fuzzy MADM problems”, International Journal of Uncertainty, Fuzziness and Knowlege-Based Systems, 5(4): 459-480, (1997).
[26] Kannan, D., De Sousa Jabbour, A.B.L., and Jabbour, C.J.C.,“Selecting green suppliers based on GSCM practices: Using Fuzzy TOPSIS applied to a Brazilian electronics company”, Eur J Oper Res, 233(2): 432-447, (2014).
[27] Wang, Y.J.,“The evaluation of financial performance for Taiwan container shipping companies by fuzzy TOPSIS”, Applied Soft Computing Journal, 22: 28-35, (2014).
[28] Chu, T.C., “Facility location selection using fuzzy topsis under group decisions”, International Journal of Uncertainty, Fuzziness and Knowlege-Based Systems, 10(6): 687-701, (2002).
[29] Mandic, K., Delibasic, B., Knezevic, S., and Benkovic, S., “Analysis of the financial parameters of Serbian banks through the application of the fuzzy AHP and TOPSIS methods”, Economic Modelling, 43: 30-37, (2014).
[30] Zhang, G., and Lu, J., “An Integrated Group DecisionMaking Method Dealing with Fuzzy Preferences for Alternatives and Individual Judgments for Selection Criteria”, Group Decision and Negotiation, 12: 501-515, (2003).
[31] Tsaura, S.H., Chang, T.Y., and Yen, C.H.,“The evaluation of airline service quality by fuzzy MCDM”, Tourism Management, 23(2): 107-115, (2002).
[32] Harding JA, Shahbaz M, Srinivas, Kusiak A., “Data mining in manufacturing: a review”. J Manuf Sci Eng.,128(4): 969-976, (2016).
[33] Köksal G, Batmaz I, Testik MC., “A review of data mining applications for quality improvement in manufacturing industry”. Expert Syst Appl., 38(10): 13448-1346, (2011).
[34] Piatetsky G., “Where Analytics, Data Science, Machine Learning were Applied: Trends and Analysis”. KDnuggets, (2018).
[35] Chen C.T., “Extensions of the TOPSIS for Group Decision Making under Fuzzy Environment”, Fuzzy Sets and Systems, 114: 1-9, (2000).
[36] Turskis, Z. and Zavadskas, E. K. and Antucheviciene, J. and Kosareva, N., “A Hybrid Model Based on Fuzzy AHP and Fuzzy WASPAS for Construction Site Selection”, International Journal of Computers Communications & Control, 10(6): 873-888, (2015).
[37] Pamucar, D., Stevic, Z., Sremac, S., “A New Model for Determining Weight Coefficients of Criteria in MCDM Models: Full Consistency Method (FUCOM)”, Symmetry, 10(9): 393, (2018).
[38] Kul Y. Şeker A., and Yurdakul M.,“Usage of fuzzy multi criteria decision making methods in selection of nontraditional manufacturing methods”, Journal of the Faculty of Engineering and Architecture of Gazi University, 29(3): 589-603, (2014).