Toz Metalürjisi ile Üretilen Nb-V Mikroalaşım Çeliğine Ni İlavesinin Mikroyapı ve Mekanik Özellikler Üzerine Etkisi

Bu çalışmada % ağırlıkça % 0,55 grafit ve % 0,15 (Nb-V) içeren demir esaslı malzemelerde Ni ilavesinin (% ağırlıkça 2, 3 ve 5) mikroyapı ve mekanik özellikler üzerine etkisi araştırılmıştır. 750 MPa basınçta preslenen numuneler 1350°C de argon atmosferinde 1 saat sinterlenerek üretimi gerçekleştirilmiştir. Üretilen TM çeliklerinin mikroyapısı optik mikroskop SEM ve EDS ile karakterize edilmiştir. Sonuçlar % ağırlık olarak 5 Ni ilave edilmiş TM çeliğin en yüksek akma dayanımına (A. D.) ve çekme dayanımına (Ç. D.) sahip olduğunu göstermiştir.

The Effect of Ni on the Microstructure and Mechanical Properties of Nb-V Microalloyed Steels Produced by Powder Metallurgy

In this work, the effect of Ni on the microstructures and tensile behaviours of Fe matrix metarials including graphite 0.55 wt. % and (Nb-V) 0.15 wt. % were investigated. The samples pressed at 750 MPa were produced by sintered at 1350°C temperature in the argon atmosphere for 1 h. The microstructure of the producted PM steels was characterised by optic microscope, SEM and EDS. Results indicated that 5 wt. % Ni added PM steel showed the highest values in yield strength (YS) and ultimate tensile strength (UTS)