The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc

The movement of moving devices or machines in terms of safety perspective must be controlled. In modern vehicle applications, braking is closely related to safety. Slowing or breaking the movements of vehicles safely is the task of braking mechanisms. The most important components of these mechanisms are the disc and brake lining pairs. Brake discs are made of lamella graphite cast iron. During the braking, the kinetic energy of the vehicle is converted into the heat energy through friction. The braking elements are subject to very heavy thermo mechanical conditions under heat, speed and load. The friction and wear properties of the brake disc must be thermally more stable against the heat energy generated on it in order to maintain stability. In this study, mechanical properties of the brake discs, which the disc surface was coated with flame spraying and melting, were improved. In addition, microstructure, abrasion, hardness and surface roughness tests of the brake disc were conducted. As a result, the coated disc showed superior mechanical properties compared to the original disc.

The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc

The movement of moving devices or machines in terms of safety perspective must be controlled. In modern vehicle applications, braking is closely related to safety. Slowing or breaking the movements of vehicles safely is the task of braking mechanisms. The most important components of these mechanisms are the disc and brake lining pairs. Brake discs are made of lamella graphite cast iron. During the braking, the kinetic energy of the vehicle is converted into the heat energy through friction. The braking elements are subject to very heavy thermo mechanical conditions under heat, speed and load. The friction and wear properties of the brake disc must be thermally more stable against the heat energy generated on it in order to maintain stability. In this study, mechanical properties of the brake discs, which the disc surface was coated with flame spraying and melting, were improved. In addition, microstructure, abrasion, hardness and surface roughness tests of the brake disc were conducted. As a result, the coated disc showed superior mechanical properties compared to the original disc.

___

Mutlu I., Eldogan O. and Fındk F., "Tribological properties of some phenolic composites suggested for automotive brakes", Tribology International, 39:317-325, (2006)

Wu Y., Ma Y., Gao W., Yang G., Fu H., Xi N. and Chen H., "High temperature wear performance of laser cladding CoO6 coating on high-speed train brake disc", Applied Surface Science, 481:761-766, (2019)

Rachidi R., Kihel B. E. and Delaunois F., "Microstructure and mechanical characterization of NiCrBSi alloy and NiCrBSi-WC composite coatings produced by flame spraying", Materials Science-Engineering, 241:13-21 (2019)

Demir A., Samur R. and Kılıçaslan I., "Investigation of the coatings applied onto brake discs on disc-brake pad pair", Metalurgija, 48(3): 161-166, (2009)

Wang J., Fu Z.K., Guo J., Zhang Y.Q., Liu Q.Y. and Zhu M.H., "Investigation on wear resistance and fatigue damage of laser cladding coating on wheel and rail materials under the oil lubrication condition". Tribology Transactions, 59(5):810-817, (2016)

Wu Y., Liu Y., Chen H., Chen Y., Li H. and Yi W., "Microstructure evolution and crack propagation feature in thermal fatigue of laser deposited Stellite 6 coating for brake discs", Surface-Coatings Technology, 358: 98-107, (2019)7. Zamani P. and Valefi Z., "Microstructure, phase composition and mechanical properties of plasma sprayed Al2O3, Cr2O3 and Cr2O3-Al2O3 composite coatings", Surface-Coatings Technology, 316:138-145, (2017)

Poirier D., Legoux J.G., Irissou E., Gallant D., Jian, J., Potter T. and Boileau J., "Performance assessment of protective thermal spray coatings for lightweight al brake rotor disks", Journal of Thermal Spray Technology, 28 (1-2): 291-304, (2019)

Güney B. and Mutlu İ., "Tribological properties of brake discs coated Cr2O3-40%TiO2 by plasma spraying", Surface Review And Lettres, (2019)

Tucker R.C., "Thermal spray coatings", ASM Handbook, 5:497-509, (1994)

Evkaya M., "Metallere aşınmaya karşı yapılan kaplamada uygun toz materyali ve kaplama yönteminin bilgisayar destekli seçimi", Yüksek Lisans Tezi, Marmara Üniversitesi Fen Bilimleri Enstitüsü, İstanbul, (2003)

Gonzalez R., Cadenas M., Fernandez R., Cortizo J.L. and Rodriguez E., "Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser", Wear, 262: 301-307, (2007)

http://www.ep-coatings.co.uk/processes/flame-spraying/, Received on May 11, 2019

Schwartz M., "Encyclopedia of materials", Parts and Finishes 2 nd ed., CRC Pressb LLC, 895, (2002)

Salman S., "Plazma ve alev püskürtme tekniğiyle Al2O3-%13TiO2 ve Cr2O3-%5SiO2-%3TiO2 seramik kaplanan malzemelerin özellikleri", Doktora Tezi, Yıldız Teknik Üniversitesi, Fen Bilimleri Enstitüsü, İstanbul, (1995)

https://www.oerlikon.com/ecomaXL/files/oerlikon_BRO-0001.17_TS_MaterialGuide_EN.pdf , Received on May 11, 2019

Rodrıguez J., Martin A., Fernandez R. and Fernandez J. E., "An experimental study of the wear performance of NiCrBSi thermal spray coatings", Wear, 255: 950-955, (2003)

Miguel J.M., Guilemany J.M. and Vizcaino S. "Tribological study of NiCrBSi coating obtained by different processes", Tribology International, 36(3): 181-187, (2003)

Hidalgo V.H., Varela F.J.B., Menendez A.C. and Martinez, S.P., "A comparative study of high-temperature erosion wear of plasma sprayed NiCrBSiFe and WC-NiCrBSiFe coatings under simulated coal-fired boiler conditions", Tribology International, 34:161-169, (2001)

Ming Q., Lim L.C. and Chen, Z.D. "Laser cladding of nickel - based hardfacing alloys", Surface-Coatings Technology, 106: 174-182, (1998)

Wu P., Zhou C. Z. and Tang X. N., "Microstructural characterization and wear behavior of laser cladded nickel-based and tungsten carbide composite coatings", Surface-Coatings Technology, 166:84-88, (2003)

Serres N., Hlawka F., Costil S., Langlade C. and Machi F., "Microstructures of metallic NiCrBSi coatings manufactured via hybrid plasma spray and in situ Laser remelting process", Journal of Thermal Spray Technology, 20(1-2):336-343, (2011)

Grivc U., Derzic D. and Simon Muhic S., "Numerical optimisation and experimental validation of divided rail freight brake disc crown", Journal of Modern Transportation, 27(1):1-10, (2019)

Hong S., Wu Y., Li G., Wang B., Gao W. and Ying, G., "Microstructural characteristics of high-velocity oxygen-fuel (HVOF) sprayed nickel-based alloy coating", Journal of Alloys and Compounds, 581:398-403, (2013)

Bergant Z., Trdan U. and Grum J., "Effect of high-temperature furnace treatment on the microstructure and corrosion behavior of NiCrBSi flame-sprayed coatings", Corrosion Science, 88:372-386, (2014)

Chen L.Y., Xu T., Wang H., Sang P., Lu S., Ze-Xin Wang Z.X., Chen S. and Zhangb L.C., "Phase interaction induced texture in a plasma sprayed-remelted NiCrBSi coating during solidification: an electron backscatter diffraction study", Surface-Coatings Technology, 358:467-480, (2019)

Miguel J.M., Guilemany J.M. and Vizcaino, S., "Tribological study of NiCrBSi coating obtained by different processes", Tribology International, 36(3): 181-187, (2003)

Stoica V., Ahmed R. and Itsukaichi T., "Influence of heat-treatment on the sliding wear of thermal spray cermet coatings", Surface-CoatingsTechnology, 199: 7-21, (2005)

Carrasquero E.J., Lesage J., Puchi-Cabrera E.S. and Staia M.H., "Fretting wear of HVOF Ni-Cr based alloy deposited on SAE 1045 steel". Surface-CoatingsTechnology, 202: 4544-4551, (2008)

Serres N., Hlawka F., Costil S., Langlade C., Machi F. and Cornet A., "Dry Coating sand ecodesign. Part 2. Tribological performances", Surface-CoatingsTechnology, 204(1-2): 197-204, (2009)

Habib K.A., Cano D.L., Heredia J.A. and Mira J.S., "Effect of post-coating technique on microstructure, microhardness and the mixed lubrication regime parameters of thermally-sprayed NiCrBSi coatings", Surface-Coatings Technology, 358: 824-832, (2019)

Gemalmayan N., "Sürtünme Malzemelerinin Özelliklerinin Deneysel İncelenmesi", Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, , Ankara, (1984)

Halderman J.D., "Automotive brake systems", Second Edition, Prentice-Hall, (2000)

Eriksson M., Bergman F. and Jacobson S., "On the nature of tribological contact in automotive brakes", Wear, 252:26-36, (2002)

Zhao N., Zhao Y., Wei Y., Wang X., Li L., Xu Y., Yan F. and Lu Z., "Friction and wear behavior of TaC ceramic layer formed in-situ on the gray cast iron", Tribology International, 135:181-188, (2019)

___

Bibtex @araştırma makalesi { politeknik563277, journal = {Politeknik Dergisi}, eissn = {2147-9429}, address = {Gazi Üniversitesi Teknoloji Fakültesi 06500 Teknikokullar - ANKARA}, publisher = {Gazi Üniversitesi}, year = {2020}, volume = {23}, number = {3}, pages = {755 - 761}, doi = {10.2339/politeknik.563277}, title = {The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc}, key = {cite}, author = {Güney, Bekir and Mutlu, İbrahim and Küçüksarıyıldız, Hanifi} }
APA Güney, B. , Mutlu, İ. & Küçüksarıyıldız, H. (2020). The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc . Politeknik Dergisi , 23 (3) , 755-761 . DOI: 10.2339/politeknik.563277
MLA Güney, B. , Mutlu, İ. , Küçüksarıyıldız, H. "The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc" . Politeknik Dergisi 23 (2020 ): 755-761 <
Chicago Güney, B. , Mutlu, İ. , Küçüksarıyıldız, H. "The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc". Politeknik Dergisi 23 (2020 ): 755-761
RIS TY - JOUR T1 - The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc AU - Bekir Güney , İbrahim Mutlu , Hanifi Küçüksarıyıldız Y1 - 2020 PY - 2020 N1 - doi: 10.2339/politeknik.563277 DO - 10.2339/politeknik.563277 T2 - Politeknik Dergisi JF - Journal JO - JOR SP - 755 EP - 761 VL - 23 IS - 3 SN - -2147-9429 M3 - doi: 10.2339/politeknik.563277 UR - Y2 - 2019 ER -
EndNote %0 Politeknik Dergisi The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc %A Bekir Güney , İbrahim Mutlu , Hanifi Küçüksarıyıldız %T The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc %D 2020 %J Politeknik Dergisi %P -2147-9429 %V 23 %N 3 %R doi: 10.2339/politeknik.563277 %U 10.2339/politeknik.563277
ISNAD Güney, Bekir , Mutlu, İbrahim , Küçüksarıyıldız, Hanifi . "The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc". Politeknik Dergisi 23 / 3 (Eylül 2020): 755-761 .
AMA Güney B. , Mutlu İ. , Küçüksarıyıldız H. The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc. Politeknik Dergisi. 2020; 23(3): 755-761.
Vancouver Güney B. , Mutlu İ. , Küçüksarıyıldız H. The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc. Politeknik Dergisi. 2020; 23(3): 755-761.
IEEE B. Güney , İ. Mutlu ve H. Küçüksarıyıldız , "The Effect of Flame Spray Coating on the Tribological Properties of Brake Disc", Politeknik Dergisi, c. 23, sayı. 3, ss. 755-761, Eyl. 2020, doi:10.2339/politeknik.563277
Politeknik Dergisi
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998

64.4b9.5b

Sayıdaki Diğer Makaleler

Equi-depth histogram construction methodology for big data tools

Tolga BUYUKTANIR, Ahmet Ercan TOPCU

Çelik dökümde alternatif gaz giderme malzemesi olarak aluminyum cürufu kullanımının incelenmesi

HASAN HASIRCI

Sol-jel yöntemiyle üretilen alümina alkojelin fizikokimyasal ve yapısal özellikleri üzerine kurutma türünün etkisi

Dilek CANTÜRK ÖZ, NİHAN KAYA

Yaya özellik tanıma için LM filtre temelli derin evrişimsel sinir ağı

Hüseyin ÜZEN, KAZIM HANBAY

Çay atıklarından türetilen yüksek performans karbonun transistörde iletim kanal materyali olarak uygulanması

Saliha Nur BIÇAKÇI, Gökçen AKGÜL

Investigation of effects of fiber orientation angles on deflection behavior of cantilever laminated composite square plates

Savas EVRAN

Estimations of stress concentration factors Cw/Kts for helical circular/square cross sectional tension-compression springs and artificial neural network modelling

Murat Tolga OZKAN, İHSAN TOKTAŞ, Sukru Kaan DOGANAY

Estimations of Stress Concentration Factors (Cw/Kts) For Helical Circular/Square Cross Sectional Tension-Compression Springs And Artificial Neural Network Modelling

M. Tolga ÖZKAN, İhsan TOKTAŞ, Kaan DOĞANAY

Çelikhane cürufunun yol temel ve alttemel malzemesi olarak kullanılması

Hüseyin KARADAĞ, Seyhan FIRAT, Nihat Sinan IŞIK

CuZn39Pb3 malzemenin torna tezgâhında işlenmesinde oluşan akım, ses şiddeti, titreşim ve yüzey pürüzlülük değeri arasındaki ilişkinin incelenmesi

Abidin ŞAHİNOĞLU, ABDULKADİR GÜLLÜ