Prediction of wood density by using red- green-blue (rgb) color and fuzzy logic techniques

Ahşap malzemenin yoğunluğu ahşabın mekaniksel özelliklerini etkilemesinden dolayı önemlidir. Mevcut yapay zeka teknikleri arasında bulanık mantık tahminlerde iyi bir yöntem olarak ortaya çıkmaktadır. Dijital görüntü tekniği bir görüntüden anlamlı bir bilgi elde etmek için kullanılan güçlü bir yöntemdir. Test örneklerinin yoğunlukları ölçülmüştür. Ayrıca, örneklerin renk yoğunluğunu ölçmek için Kırmızı-Yeşil-Mavi (KYM) renk muayenesine dayanan dijital görüntü analizi uygulanmıştır. Ölçülen değerler ve ahşabın KYM renk yoğunluğu temelinde yeni bir bulanık mantık modeli geliştirilmiştir. Sonrasında deneyler ve model verileri karşılaştırılmıştır. Hazırlanan modelin çıkarımları ile deneysel veriler %98.17 oranında doğruluk göstermiştir. Sonuç olarak, bulanık mantık odun yoğunluğu tahmini için geçerli bir yöntem olduğu tespit edilmiştir.

Kırmızı-yeşil-mavi (kym) renk ve bulanık mantık teknikleri kullanılarak odun yoğunluğu tahmini

Density is an important wood property since it correlates to mechanical properties of wood. Fuzzy logic, among the various available Artificial Intelligence techniques, emerges as a good technique in predicting. Digital image analysis is an powerful tool to obtain meaningful data out of an image. In this study, digital image processing based on a red-green-blue (RGB) color examination was practiced to measure the intensity of wood color. Densities of the test samples were measured. Then, a new fuzzy logic model was developed based on these measured values and RGB color intensity of wood. Afterwards, the experimental and modeling data results were compared. 98.17% accuracy was observed between the measurement and the fuzzy logic model. Consequently, Fuzzy logic is visable method for the prediction of the wood density.

___

  • 1. Ors Y. and Keskin H., "Wood materials science (Ağaç malzeme teknolojisi)", Gazi University Publication, No: 2001-352, Ankara, (2008).
  • 2. Zareiforoush H., Minaei S., Alizadeh M.R. and Banakar A., "A hybrid intelligent approach based on computer vision and fuzzy logic for quality measurement of milled rice", Measurement, 66: 26-34, (2016).
  • 3. Chen C.L. and C.L. Tai C.L., "Adaptive fuzzy color segmentation with neural network for road detections", Engineering Applications Artificial Intelligence, 23 (3): 400-410, (2010).
  • 4. Hassan M.A., Yusof Y., Azmi M.A. and Mazli M.N., "Fuzzy Logic Based Intelligent Control of RGB Colour Classification System for Undergraduate Artificial Intelligence Laboratory", The World Congress on Engineering, London, 713-718, (2012).
  • 5. Tou J.Y., Lau P.Y. and Tay Y.H., "Computer vision- based wood recognition system", International Workshop on Advanced Image Technology (IWAIT), Bangkok, Thailand, 197-202, (2007).
  • 6. Esteban L.G., Fernández F.G., Palacios P. and Conde M., "Artificial neural networks in variable process control: application in particleboard manufacture", Investıgacıon Agrarıa-Sıstemas Y Recursos Forestales, 18(1): 92-100, (2009).
  • 7. Khalid M., Lee E.L.Y., Yusof R. and Nadaraj m., "Design of an intelligent wood species recognition system", International Journal of Simulation: Systems, Science and Technology, 9(3): 9-19, (2008).
  • 8. Ozsahin S., "Optimization of process parameters in oriented strand board manufacturing with artificial neural network analysis", European Journal of Wood and Wood Products, 71(6): 769-777, (2013).
  • 9. Ruz G.A., Estévez P.A., and Perez C.A., "A neurofuzzy color image segmentation method for wood surface defect detection", Forest Products Journal, 55(4): 52-58, (2005).
  • 10. Cavdarlı M. and Seke E., "Measuring roughness on wood surfaces for detection of defects using multi-frame imaging", The International Symposium on Innovations in Intelligent Systems and Applications, Kayseri, 21-23, (2010).
  • 11. Cheung W.W.L., Pitcher T.J. and Pauly D., "A fuzzy logic expert system to estimate intrinsic extinction vulnerabilities of marine fishes to fishing", Biological Conservation, 124(1): 97-111, (2005).
  • 12. Uraon K.K. and Kumar S., "Analysis of Defuzzification Method for Rainfall Event", International Journal of Computer Science and Mobile Computing, 5(1): 341- 354, (2016).
  • 13. URL1,https://en.wikipedia.org/wiki/Fuzzy_set_ operations#Fuzzy_unions. (Accessed 9 Semtember 2016).
  • 14. URL2,http://www.massey.ac.nz/~nhreyes/ MASSEY/159741/Lectures/Lec2012-3-159741- FuzzyLogic-v.2.pdf. (Accessed 9 September 2016).
  • 15. Bardak S., Tiryaki S., Nemli G. and Aydın A., "Investigation and neural network prediction of wood bonding quality based on pressing conditions", International Journal of Adhesion and Adhesives, 68: 115-123, (2016).
  • 16. Tiryaki S. and Hamzacebi C., "Predicting modulus of rupture (MOR) and modulus of elasticity (MOE) of heat treated woods by artificial neural networks", Measurement, 49: 266-274, (2014).
  • 17. Tiryaki S., Bardak S. and Bardak T., "Experimental investigation and prediction of bonding strength of Oriental beech (Fagus orientalis Lipsky) bonded with polyvinyl acetate adhesive", Journal of Adhesion Science and Technology, 29(23): 2521-2536, (2015).
  • 18. ASTM D1666 - 87, "Standard Methods for conducting Machining Tests of Wood and Wood-Base Materials", (2004).
  • 19. TS 2472, "Wood Determination of density for physical and mechanical tests", (2005).
  • 20. Nopens I., Foubert I., Graef V.D., Laere D.V. Dewettinck K. And Vanrolleghem P., "Automated image analysis tool for migration fat bloom evaluation of chocolate coated food products", Journal of Food Science and Technology, 4:1884-1891, (2008).
  • 21. Nian C.Y., Chuang S.F. and Tarng Y.S., "A new algorithm for a three-axis auto-alignment system using vision inspection", Journal of Materials Processing Technology, 171: 319-329, (2006).
  • 22. Lv B., Li B., Chen S., Chen J. and Zhu B., "Comparison of color techniques to measure the color of parboiled rice", Journal of Cereal Science, 50(2): 262-265, (2009).
  • 23. Thalmann C., Freise J., Heitland W. and Bacher S., "Effects of defoliation by horse chestnut leafminer (Cameraria ohridella) on reproduction in Aesculus hippocastanum", Trees, 17: 383-388, (2003).
  • 24. Akkurt, S., Tayfur, G. and Can, S., "Fuzzy logic model for the prediction of cement compressive strength" Cement and Concrete Research, 34(8):1429-1433, (2004).
  • 25. Ozcifci, A., Yapici, F. and Altun, S., "The prediction of effect of grain angle over modulus of rupture and modulus of elasticity values on Scotch pine with Fuzzy logic classifier" 5th International Advanced Technologies Symposium (IATS'09), Karabuk, 13-15, (2009).
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Comparison Of Particle Swarm And Differential Evolution Optimization Algorithms Considering Various Benchmark Functions

HASAN ÖZCAN

Bir Termik Santralin Performans Analizi ve Rehabilitasyon Metotları

M. Bahadır ÖZDEMİR, TAYFUN MENLİK, H. ibrahim VARiYENLi, Levent SEVİN

Ultraviyole Flekso Mürekkeplerin Karboksimetil Selüloz ve Polivinil Alkol ile Kaplanmış Kartonların Basılabilirlikleri Üzerindeki Etkilerinin Karşılaştırılması

Sinan SÖNMEZ

Enhancement in Photovoltaic Characteristics of CdS/CdTe Heterojunction

MEHMET PARLAK, Özge BAYRAKLI, HASAN HÜSEYİN GÜLLÜ, Gökhan SÜRÜCÜ

Hydroxyapatite Coating on Ti6Al4V Alloy Surface Through Biomimetic Method Using Glycolic Acid - Sodium Gluconate Buffer System and Examination of Properties of the Coating

İBRAHİM AYDIN, Ferdi ENGİN

Ilıca (Kütahya) Bazaltının Beton Agregası Olarak Kullanılabilirliğinin Araştırılması

MUSTAFA YAVUZ ÇELİK, Ahmet ŞAHBAZ

Comparative Thermodynamic Assessment of Various Super- and Trans-Critical Working Fluids for Low Temperature Power Generation Applications

HASAN ÖZCAN, Sertaç Samed SEYİTOĞLU

Identification of Critical Values Based on Natural Ester Oils as Potential Insulating Liquid for High Voltage Power Transformers

NİHAT PAMUK

Rüzgâr Gücü Tahminlerinin Önemi: Türkiye Elektrik Piyasasında Bir Uygulama

Fatih KARIK, ADNAN SÖZEN, Muhammed Mustafa İZGEÇ

Okul Yeri Seçiminde Coğrafi Bilgi Sistemine Dayalı AHP-TOPSIS Yaklaşımı: Ankara İli Örneği

AYŞENUR USLU, Kübra KIZILOĞLU, SELÇUK KÜRŞAT İŞLEYEN, Erkay KAHYA