Otomatik katodik koruma redresörlerinde darbe genişlik modülasyonu yöntemi ile güç kontrolü

Bu çalışma ile korozyona karşı korumada bilinen bir yöntem olan, dış akım kaynaklı katodik koruma sisteminde kullanılan otomatik trafo/redresörlerin, güç regülasyon katında kullanılan aygıtlardan doğan değişik sorunları giderme yoluna gidilmiştir. Otomatik katodik koruma redresörlerinin mekanik sorunlarını gidermek için tamamen katı-hal tabanlı bir tasarım üzerinde durulmuş, bu tür redresörlerde ilk defa Darbe Genişlik Modülasyonu (PWM) yöntemine dayalı güç regülasyonu önerilmiştir. Bu şekilde tasarlanan otomatik katodik koruma redresörü, akım ihtiyacı dinamik olarak değişen bir yapıya uygulanarak, yapıyı korumada sistemin hassasiyeti, tepki verme süresi ve sağlıklı çalışması için önemli bir faktör olan ripple düzeyi gibi büyüklüklerin idealde istenen değerler ile ilişkisi incelenmiştir.

Power control of cathodic protection rectifiers using pulse width modulation method

In this paper, various problems , arising from the devices used on power regulation stage of automatic transformer/rectifiers, which is used for current cathodic protection method , have been investigated. To solve the mechanical problems of automatic cathodic protection system, a solid-state based design using Pulse Width Modulation (PWM) method, was used on power regulation. The relation of the values which were ideally requested with the magnitude, such as ripple level which is an important factor for the protection of structure, sensitivity of the system, reaction time, and reliability were studied with the application of automatic cathodic protection rectifier to a metallic structure which its current necessity is dynamically varies.

___

  • 1. Yalçın, H., Koç. T., 1998, Mühendisler için Korozyon, Kimya Mühendisleri Odası, Ankara.
  • 2. Paurbaix, M., 1976, Atlas of Electrochemical Eguilibrium in Agueous Solutions, Pergamon Pres Ltd., London.
  • 3. Uhlig, H.H. , 1971, Corrosion and Corrosion Control, John Wiley and sons, New York.
  • 4. Atkinson, J.T.N., Vantroffclaar, H., 1985, Corrosion and its control, National Associotion of Corrosion Engineers.
  • 5. Yalçın, H., Koç, T., 1991, Demir ve Çelik Yapıların Korozyonu ve Katodik Korunması, İller Bankası Genel Müdürlüğü Yayını, Anaka, Yayın No: 47.
  • 6. Rashid, M.H., 1988, Power Electronics Circuit, Devices and Applications, Purdue University Calumet.
  • 7. Rezanejad, R., 1999, SCADA Tabanlı Katodik Koruma Redresör Terminali Tasarımı ve Uygulaması, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara.