Kutu konstruksiyonlu mobilyada sabit (yabancı çıtalı) ve demonte (trapez) köşe birleştirmelerin çekme ve basma dirençleri

Denemelerde kutu mobilya konstrüksiyonunda geniş kullanım alanı bulunan çekme ve basma yükleri altındaki yabancı çıtalı ve trapez bağlantı elemanlı 150 x 150 x 18 mm ölçülerinde yonga levha ve lif levha (MDF)'lar ile oluşturulan "L tipi" köşe birleştirme deney elemanlarının dirençleri belirlenmiştir. Sabit birleştirmelerde polivinil asetat (PVAC) tutkalı, demonte birleştirmelerde ise trapez tipi köşe bağlantı elemanı ile bağlantı sağlanmıştır. Toplam 64 adet deney örneği ISO 6237 ve ASTM D 143-83'de belirtilen esaslara göre çekme ve basma direnci deneyine tabi tutulmuştur. Deneme gruplanna ilişkin her bir birleştirme tipinin çekme ve basma dirençlerine etkisi çoklu varyans analizleri ile belirlenmiş, farklılıkların anlamlı çıkması halinde LSD testi kullanılmıştır. Deney sonuçlarına göre lif levhalar, yonga levhalara, demonte birleştirmelerde sabit birleştirmelere üstünlük sağlamışlardır.

The tension and compression strength of furniture stable (spline) and demontable (trapez) corner joints in case construction

In the tests were determinated, the strength of 150 x 150 x 18 mm size particleboard and medimum density fiberboard (MDF) "L" shaped speciment of spline and trapez corner joints under both tension and compression loading which are widely used in the construction of case furniture. In the stable joints, have been used polivinil acetat (PVAc) adhesive as for the connections were provided with trapez knock-down fitting in the demontable joints. According to the principles of ISO 6237 and ASTM D 143-83 total 64 speciments have been tested under a static load in the test. In the effect of diffirence for both tension and compression strength of related joint type for every test groups were determined with multi factors varians analyzes and have been used the test of LSD in the case for the diffirences. According to the result of test, medium density fiberboard were gained to the particleboard and the démontable joints to stable joints.

___