Islak Kireçli Baca Gazı Desülfürüzasyon Sistemi Termodinamik Ve Ekonomik Analizi

yapılan bir fabrikada ıslak kireçli baca gazı desülfürüzasyon sistemi uygulamasının termodinamik ve ekonomik açıdan değerlendirilmesi yapılmıştır. Buna göre sistem, enerji ve ekserji analizi metodları ile ele alınarak termodinamik değerlendirilmeleri yapılmış, ömür ve maliyet  hesabı (LCC) ile birlikte net bugünkü değer (NBD) yöntemleri kullanılarak sistemin yatırıma değer olup olmadığı araştırılmıştır.Yapılan çalışma sonucunda, sistemin enerji verimi %48 ekserji verimi %59,5 olarak hesap edilmiştir. Mevcut çalışma şartları altında, sistemin ömrü 20 yıl kabul edilerek, NBD’si  2.999.727  TL olarak bulunmuş.Sistemde yapılacak iyileştirmeler neticesinde sistemin NBD’nin 58.171.167  TL’ye çıkarılabileceği edilmiştir.  

Thermodynamic And Economic Analysis Of Wet Lime Liquid Gas Desulfurization System

In this study, the wet lime flue gas desulphurisation system (WLFGD) is considered and the wet flue gas desulphurisation system applied in a factory where the refractory brick production is made in Kütahya province is evaluated from the termodynamic and economic point of view. The system is evaluated by energy , exergy analysis methots and thermodynamic evaluations (LCC)  together with net present value (NPV) methots to determine whether the system is worth investment. As a result of the work done ,the energy efficency of the system is calculated as %48 exergy efficency of system is calculated as %59,5. Under the  current working conditions, the system life has been accepted for 20 years and the investment value of the system which is found as NPV 2.999.727 TL  has been determined. Due to the improvements ,the NPV value can be increased to 58.171.167 TL.

___

  • [1] Biondo, S. J. and Marten, J. C., “A history of flue gas desulfurization systems since 1850”, Journal of the Air Pollution Control Association, 27(10): 948-961, (1977).
  • [2] Kayapınar, O., “Islak Kireçli Baca Gazı Desülfürüzasyon Sisteminin Termodinamik Analizi”, Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, (2017).
  • [3] Karakaras, E. and Giannakopoulos, D., “Modeling of flue gas desulphurization using dry additives”, Chemical Engineering and Processing: Process Intensification, 34(5): 421-432, (1995).
  • [4] Ukawa,N., Takashina, T., Okino, S., Kimura, K. and Iwashita ,K., “Development of Double-Contact-Flow Scrubber for Flue Gas Desulfurization”, Mitsubishi Heavy Industries, Technical Review, 33(2): (1996).
  • [5] Şentürk, G., “Tronanın Farklı Sistemlerdeki Sülfatasyon Kapasitesinin Belirlenmesi”, İTÜ Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, İstanbul, (2002).
  • [6] Xiao, L., G. and Hui, S. S., “Thermal treatment and utilization of flue gas desulphurization gypsum as an admixture in cement and concrete”, Construction and Bulding Materials, 22(7): 1471-1476, (2008).
  • [7] Yu,YS. Yi,L,. Li, Q., Jiang, J., Zhang, Z., X., “ An innovative process of simultaneous removal CO2 and SO2 from flue gas of a power plant by energy integration”, Energy Conversation and Management, 50: 2885-2892, (2009).
  • [8] Gordon, M., Nobblet, J., Denlinger D. and Klingspor, J., “New Technologies to Improve the Performance and Realibity of Older FGD Systems”, URS Corporation Technical Review, 129(1): (2010).
  • [9] Carletti, C. Bjondahi., De Blasio, C., Ahibeck, J., Jarvinen, L. and Westerlund, T., “Modelling limestone reactivity and sizing the dissolution tank in wet flue gas desulfurization scrubbers”, Enviromental Progress and Sustainable Energy, 32: 663-672, (2013).
  • [10] Arif, A. Everson R. C. and Neomagus, H. W. J. P., “CFD modelling of wet flue gas desulphurization (WFGD) Unit: A new era of process system control and optimization”, Conference of the National Association for Clean Air, South Africa, (2015).
  • [11] Çengel Y. and Boles, M.A., “Mühendislik Yaklaşımıyla Termodinamik”, Çev. Derbentli T., Literatür Yayıncılık, İstanbul, (1996). [12] Bejan, A., Tsatsaronis, G., Moran M. J., “Thermal Design And Optimization”, John Wiley, 113–167, (1996).
  • [13] Ahrendts, J., “Reference states”, Energy, 5: 667-677, (1980).
  • [14] Yılmaz, D, Aydın, G. and Özkan, C., “Metal kutu üreten bir firmada fizibilite etüdü uygulaması”, V. Ulusal Üretim Araştırmaları Sempozyumu, İstanbul Ticaret Üniversitesi, İstanbul, (2005).
  • [15] Güler, T. and Yücedağ M., “Atmosfer kontrollü soğuk hava tesisi fizibilite raporu”, Doğrudan Faaliyet Destek Programı, Fırat Kalkınma Ajansı, (2011).
  • [16] Yoğunoğlu A., Yüzeroğlu M., Hopoğlu S. and Gökçe, S.G., “Dondurulmuş Meyve-Sebze Sektör Analizi ve Ön Fizibilitesi”, Fırat Kalkınma Ajansı, (2013).
  • [17] http://www.tcmb.gov.tr, “Reeskont İskonto Oranı”, (2016).