Düşük frekanslı mekanik titreşimin Al-%7.15 Si alaşımın makro ve mikro yapısına etkisi

Düşük frekanslı mekanik titreşimin Al-%7.15Si alaşımın makro ve mikro yapısı üzerindeki etkisi ile ilgili yapılan deney suçları detaylı olarak tartışılmış ve titreşim ile muhtemel tane inceltme mekanizmaları araştırılmıştır.

Effect of low frequency vibration on macro and micro structures of Al-7.15% Si alloy

Results of this study which is effect of low frequency mechanical vibration on macro and micro structures of Al-7.15%Si alloy are discussed in detail, and possible grain refinement mechanisms with vibration are examined.

___

1.Mondolfo, L. F., Aluminum Alloys Structures and Properties, Butterworths, London, 1979.

2.Polmear, I. J., Light Alloys, 2nd ed., Edward Arnold, London, 1989.

3.Sigworth, G. K., Theoretical amd Practical Aspects of the Modification of Al-Si Alloys, Trans. A.F.S.,91,7-16, 1983.

4. Ye, B. J., The Modification and Control of CastAl- Si alloys, Ph.D. Thesis, The Univ. of Wisconsin-Madison, 1985.

5. Kanicki, D. P., Processing Molten Aluminum, Modern Casting, 1, 24-27, 1990.

6. Hanna, M. D., Lu, S. Z., and Hellawell, A. Modification in the Aluminium-Silicon System, MetTrans., 15A, 459-469, 1984.

7. Kanani, N., Abbaschican, G. R., Modification of Aluminium Silicon Alloys, Aluminium, 60, E505-509, 1984.

8.Talbot, D. E. J., Effects of Hydrogen in Aluminium, Magnesium, Copper, and Their Alloys, Int. Metali. Rev., 20, 166-184, 1975.

9. Argo, D., Gruzleski, J. E., Porosity in Modified Aluminium Alloy Castings, Trans. A.F.S., 96,65-74, 1988.

10. Fang, Q. T., Granger, D. A., Porosity Formation in Modified and Unmodified A356 Alloy Castings, Trans. A.F.S., 97, 989-1000, 1989.

11. Sigworth, G. K., Guzowski, M. M., Grain Refining of Hypoeutectic Al-Si Alloys, Trans. A.F.S, 93, 907-912, 1985.

12. Apelian, D., Sigworth, G. K., Whaler, K. R., Assessment of Grain Refinement and Modification of Al-Si Foundry Alloys By Thermal Analysis, Trans. A.F.S., 92, 297-307, 1984.

13. Closset, B., Gruzleski, J. E.., Mechanical Properties of A356.0 Alloys Modified with Pure Strontium Trans. A.F.S., 90, 453-464, 1982.

14. Kocatepe, K., Al-Sil 12 Alaşımının Metalik Sodyum ile Modifikasyonu, MsC. Thesis, Gazi Univ., ANKARA, 1989.

15.Hurley, T. J., Atkinson, R. G., Effects of Modification Practice on Aluminum A-356 Alloys, Trans. A.F.S., 39, 291-296, 1985.

16. Thall, B. M., Chalmers, B., Modification in Aluminium-Silicon Alloys, J. Inst.Met.,77,79-97,1950. 17. Steen, H. A. H., Hellawell, A., Structure and Properties of Aluminium Silicon Eutectiç Alloys, Acta Metallurgies 20, 363-370, 1972.

18. Mulazimoğlu, M. H., Gruzleski, J. E., Electrical Conductivity in Aluminium; Possible Alternative to Thermal Analysis, Modern Casting, 1, 29-31, 1990.

19. Argo, D., Gruzleski, J. E., Porosity in Aluminium Foundry Alloys-The Effect of Modification, Proc. Int. Symp., Reduction and Casting of Aluminium, Montreal, 28-31 Aug., 263-282, 1988.

20. Fisher, T. P., Effects of Vibrational Energy on *H*the Solidification of Aluminium Alloys, British Foundryman, 66, 71 -84, 1973.

21. Shukla, D. P., Goel, D. B., Pandey, P. C., Influence of Vibration During Solidification on Ingot Soundness and Mechanical Properties of Aluminium Alloy Test Castings, All-India Seminar on Aluminium, New Delhi, Oct., 26.1-26.6, 1978.

22.Garlick, R.G., Wallace, J. F., Grain Refinement of Solidifying Metals by Vibration, Trans. A.F.S., 67, 366-374, 1959.

23. Abd-El-Azim, A. N., Effect of Low frequency Mechanical Vibration on the Structure of Aluminium-Silicon Alloys, 7 th. Intern. Light Metals Cong., Aluminium-Verlag, Leoben, Vienna, 118-120, 1981.

24.Barbure, R. R., Harreesha, I., Murthy, K. S. S., Influence of Low Frequency Vibrations on Aluminium Eutectics, British Foundryman, 1979, T2, 34-38, 1979.

25. Pillai, N. R., Effect of Low Frequency Mechanical Vibration on Structure of Modified Aluminium-Silicon Eutectiç, Metali. Trans., 3, 1313-1316,1972.

26.Freedman A. H., Wallce, J. F., Trans. A.F.S., 65,578,1957.

27. Campbell, J., Effects of Vibration During Solidification, Int. Met. Reviews, 2, 71-108, 1981.

28. Seal, A. K., Banerjee, M. K., Effect of Vibration on the Solidification of Grey Cast Iron, Indian Foundry J., 30, (4), 15-20, 1984.

29. Richards, R. S., Rostoker, W., The Influence of Vibration on the Solidification on an Aluminum Alloy, Trans. A.S.M., 48, 884-903, 1956.

30.Southgate, P. D. Action of Vibration on Solidifying Aluminum Alloys, J. Metals, Apr., 4, 514-517, 1957.

31. Shahani, H., Fredriksson, H., On the Mechanism of Precipitaion of Pores in Melts, Scandinavian Journal of Metallurgy, 14, 316-320, 1985.

32. Plutshack, L.A.,Suchill A. L., A.S.M. Handbook, The Materials Information Soc., U.S.A., 15. 577, 1988.

33. Batyshev, A. I., Kuskov, P. K., Vibration Treatment of Cast Aluminum Blanks, Sov. CastTechnol, 12, 24-26,1989.

34.Irani, D. R., Kondic, V., Casting and Mold Design Effects on Shrinkage Porosity of Light Alloys Trans. A.F.S., 77, 208-211, 1969.

35.Schmid, G., Roll, A., Z. Elektrochem., 45, 769, 1939.

36.Cole, G. S., Boiling, G. F., Importance of Fluid Motion During Ingot Solidification, The Solidification of Metals, Iron and Steel Inst.,London, 324-329, 1967.

37. Southin, R. T., The Influence of Low Frequency Vibration on the Nucleation of Solidifying Metals, J Int. Met., 94, 401-407, 1966.

38 Bower, T F., Flemings, M C., Formation of the Chill Zone in Ingot Solidification, Trans. Met. Soc, A.I.M.E., 239, 216-219, 1967.

39. Biloni, H., Relationship Between Segregation Substructures and Casting Structures, The Solidification of Metals, Iron and Steel Inst, London., 74-82, 1967.

40. Jakson, K. A., Hunt, J. D., Uhlmann, D. R., Sewardt, P., On the Origin of the Equiaexed Zone in Castings, Trans.Met.Soc.A.I.M.E., 236, 149-158, 1966.

41.Campbell, J., Grain Refinement of Solidifying Metals by Vibration, Solidification Technology in The Foundry and CastHouse, The Metals Soc.,London, 61-64,1983.

42. Balandin, G. F., Yakovlev, P. Y., Effect of Vibration on the Crystallization Process in Aluminium Castings, Russian Casting Production, 221-223, 1963.

43.Southin, R. T., Dynamic Nucleation of Solidifying Metals, Trans. Metali. Soc. A.I.M.E, 236, 305-308, 1967.

44.Genders, R., J. Inst. Met., 35, 259, 1926.

45. Chalmers, B, Trans.A.I.M.E., 200, 519, 1954.

46.Chalmers, B., The Structure of Ingots, J. Aust. Inst. Met, 8, (3),255-263, 1963.

47.Puskar, A., The Use of High-Intensity Ultrasonics, Material Science Monographs 13, Elsevier Scientific Publishing Company, New York, 1982.

48.Southin, R. T., Nucleation of the Equiaxed Zone in Cast Metals, J. Int. Met., 239, 220-225,1967.

49.Kocatepe, K., The Effect of low Frequency Vibration on Macro and Micro Structures of LM25 and LM6 Alloys, PhD. Thesis, The Univ. of Strathclyde, Glasgow, U.K., 1997.

50.Atasoy, O. A., Growth Mechanisms of Directionally Solidified Aluminium-Silicon Eutectic Alloys, Aluminium, 60, E108-E111, 1984.

51.Flood, S. C., Hunt, J. D., Modification of Al-Si Eutectic Alloys with Na, Metal Sci., 15, 287-293, 1981.

52.Qiyang, L., Quingchun, L., Zhang, J., Adsorpption of Na (111) Si Surfaces in Al-Si Alloy, Scripta Metali., 22, 789-791, 1988: