Cem I, Cem IIIa ve Borlu Çimento Harçları Üzerine Farklı Agresif Koşulların Etkisi

Bu çalışmada deniz suyu ve amonyum nitrat gibi farklı etkilere maruz kalmış çimento harçlarının direnci araştırılmıştır. Borlu, CEM I ve CEM III/A çimentoları kullanılarak çimento harç numuneleri hazırlanmıştır. Çimento harçlarının genleşme değerlerini belirlemek için 25 x 25 x 285 mm boyutunda harç çubukları, basınç dayanımları için 40x40x160 mm boyutunda prizmalar üretilmiştir. Harç numuneleri %5'lik amonyum nitrat çözeltisi, içme ve deniz suyu olmak üzere üç farklı koşulda, 20±3 ºC sıcaklıkta 2, 7, 14, 28 ve 90 gün süreyle bekletilmiştir. Tüm ortam koşulları ve yaşlarda en düşük genleşme CEM III/A çimentolu harçlarda bulunmuş, hem deniz suyu ve hem de amonyum nitratlı ortamlara karşı CEM III/A çimentolu harçların daha yüksek direnç sağladığı gözlenmiştir.

The Effect of Different Aggresive Condition on Mortars of Cem I, Cem II and Boron Cement

This study investigates the sea water and ammonium nitrate resistance of cement mortars when subjected to different exposure conditions. Cement mortar samples were prepared using Boron, CEM I and CEM III/A cements. Mortar specimens were stored under three different conditions: continuous curing in lime-saturated tab water, continuous exposure to sea water, and continuous exposure to 5% ammonium nitrate solution (AN), at a temperature of 20±3 ºC, for 2, 7, 14, 28 and 90 days. Prisms with dimensions of 25x25x285 mm, to determine the expansions of the mortar samples; and another set of prisms with dimensions of 40x40x160 mm, were prepared to calculate the compressive strength of the samples. For all environmental conditions and ages, the lowest expansion is found for CEM III/A cement mortars. It has been observed that CEM III/A cement mortars have the highest resistance for both sea water and environments with ammonium nitrate.

___

  • BC'li harç çubuklarının 7, 14 ve 28 günlük genleşme değerleri diğer çimentoların genleşme değerlerinden daha fazla olmuştur.
  • Tüm ortam koşullarında ve her yaşta en düşük genleşme SC'li harç çubuklarında oluşmuştur.
  • Ortam koşulları ve yaş grupları birlikte değerlendirildiğinde en düşük basınç dayanımı BC'li prizmalarda elde edilmiştir.
  • Erken yaşlarda PC'li prizmaların, ileriki yaşlarda ise SC'li prizmaların basınç dayanımlarının yüksek değerler verdiği gözlenmiştir.
  • Müller N, Harnisch J, 2008. A blueprint for a climate friendly cement industry. Gland: WWF lafarge conservation partnership; WWF - Lafarge conservation partnership report
  • Flatt RJ, Roussel N, Cheeseman CR, 2012, Concrete: An eco material that needs to be improved, Journal of the European Ceramic Society, 32, 2787-2798.
  • Quillin K, 2001. "Performance of belite-sulfoaluminate cement", Cement Concrete Res., 31 (9), 1341-1349.
  • Türk S, Gürbüz G, Ertün T, Yeginobali A, 2006. "Heat of hydration and shrinkage properties of Boron containing active belite cements", ConcreteLife'06 - International RILEM-JCI Seminar on Concrete Durability and Service Life Planning: Curing, Crack Control, Performance in Harsh Environments, RILEM Publications SARL, 397- 404,
  • Zivica V, vd., 2012, Acidic attack of cement based materials under the common action of high, ambient temperature and pressure, Construction and Building Materials, 36, 623-629.
  • Sabbioni C, vd., 2001, Atmospheric deterioration of ancient and modern hydraulic mortars, Atmospheric Environment, 35, 539-548.
  • Lea F.M., 1970. The Chemistry of Cement and Concrete, 3rded. Edward London: Arnold.
  • Taylor HFW, 1990. Cement Chemistry, 2nded. Thomas Telford Publishing, London.
  • ) Schneider U, Chen SW, 1999. Behavior of high- performance concrete (HPC) under ammonium nitrate solution and sustained load, ACI Materials Journal, 96 (1), 47-51.
  • Guerrero A, Goñi S, and Lorenzo M. P., 2008. Long term durability at 40ºC of ecoefficient belite cement-mortar exposed to sulfate attack, Advances in Cement Research, 20(4), October, 139-144.
  • Chatterjee AK, 1996. High belite cements-Present status and future technological options: Part I, Cem. Concrete Res., 26 (8), 1213-25.
  • Popescu CD, Muntean M, and Sharp JH, 2003. Industrial trial production of low energy belite cement, Cement & Concrete Composites, 25, 689-693.
  • TS EN 196-1, 2002, Çimento Deney Metotları- Bölüm 1, Dayanım, TSE, Ankara.
  • TS EN 196-3, 2002, Çimento Deney Metotları- Bölüm 3, Priz Süresi ve Hacim Genleşmesi Tayini, TSE, Ankara.
  • ASTM C1012 / C1012M - 07, 2007. Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution, Annual book of ASTM standards, Philadelphia, USA.