Biyogaz Reaktörlerinde Nem Tespiti İçin Fiber Optik Sensör Tasarimi ve Prototip Çalişmasi

Biyogaz reaktörlerinde, artan nem ile su buharının yoğunlaşmasının izlenmesi hayati önem taşır. Bu kontrolün çevrimiçi olarak hızlı ve güvenilir bir şekilde yapılmasına izin veren fiber optik tabanlı sensörlerin kullanılması, süreci kolaylaştırır. Buna göre bu çalışmada, biyogaz reaktörleri için fiber optik su buharı ve yoğunlaşma sensörü tasarlanmış ve uygulaması yapılmıştır. Fiber yansıma ve boyuna hizalama kayıplarına bağlı olarak nem seviyesinin artması ile oluşacak su buharı ve yoğunlaşması algılanabilmiştir. Hızlı tepki verebilen ve tespit edilecek parametre dışındaki çevresel değişkenlerden etkilenmeyen çok düşük maliyetli bir sensör mekanizması oluşturularak, artan su buharı ve yoğunlaşmanın başlangıç anı yüksek hassasiyet ve hızla tespit edilebileceği gösterilmiştir.

Fiber Optic Sensor Design and Prototyping for Humidity Detection in Biogas Reactors

In biogas reactors, it is vital to monitor the condensation of water vapor with increasing humidity. The use of fiber optic-based sensors that allow this control to be done online quickly and reliably facilitates the process. In this study, a fiber-optic water vapor and condensation sensor was designed and implemented for biogas reactors. It enables the detection of water due to water vapor and condensation that will increase humidity level based on the combination of fiber reflection losses and longitudinal alignment losses. By creating a very low-cost sensor mechanism that can react quickly and is not affected by environmental variables other than the parameter to be detected, the increasing water vapor and the initial moment of the condensation can be detected with high precision and speed.  

___

  • [1] Ascorbe, J., Corres, J. M., Arregui, F. J., & Matias, I. R., “Recent developments in fiber optics humidity sensors”, Sensors, 17(4): 893, (2017).
  • [2] Udd, E., Spillman Jr, W. B., “Fiber Optic Sensors: An Introduction for Engineers and Scientists”, John Wiley & Sons, 498, (2011).
  • [3] Estella, J., de Vicente, P., Echeverría, J. C., & Garrido, J. J., “A fibre-optic humidity sensor based on a porous silica xerogel film as the sensing element”, Sensors and Actuators B: Chemical, 149(1): 122-128, (2010).
  • [4] Zhao, Z., & Duan, Y., “A low cost fiber-optic humidity sensor based on silica sol–gel film”, Sensors and Actuators B: Chemical, 160(1): 1340-1345, (2011).
  • [5] Xu, W., Huang, W. B., Huang, X. G., & Yu, C. Y., “A simple fiber-optic humidity sensor based on extrinsic Fabry–Perot cavity constructed by cellulose acetate butyrate film”, Optical Fiber Technology, 19(6): 583-586, (2013).
  • [6] Huang, Y., Zhu, W., Li, Z., Chen, G., Chen, L., Zhou, J., ... & Yu, J., “High-performance fibre-optic humidity sensor based on a side-polished fibre wavelength selectively coupled with graphene oxide film”, Sensors and Actuators B: Chemical, 255: 57-69, (2018).
  • [7] Chen, M. Q., Zhao, Y., Wei, H. M., Zhu, C. L., & Krishnaswamy, S., “3D printed castle style Fabry-Perot microcavity on optical fiber tip as a highly sensitive humidity sensor”, Sensors and Actuators B: Chemical, 328: 128981, (2021).
  • [8] Li, X., Shao, Y., Yu, Y., Zhang, Y., & Wei, S., “A highly sensitive fiber-optic Fabry–Perot interferometer based on internal reflection mirrors for refractive index measurement”, Sensors, 16(6): 794, (2016).
  • [9] Wang, B., Tian, J., Hu, L., & Yao, Y., “High sensitivity humidity fiber-optic sensor based on all-agar Fabry–Perot interferometer”, IEEE Sensors Journal, 18(12): 4879-4885, (2018).
  • [10] Limodehi, H. E., & Légaré, F., “Fiber optic humidity sensor using water vapor condensation”, Optics express, 25(13): 15313-15321, (2017).
  • [11] Correia, S. F., Antunes, P., Pecoraro, E., Lima, P. P., Varum, H., Carlos, L. D., ... & André, P. S., “Optical fiber relative humidity sensor based on a FBG with a di-ureasil coating”, Sensors, 12(7): 8847-8860, (2012).
  • [12] Shrivastav, A. M., Gunawardena, D. S., Liu, Z., & Tam, H. Y., “Microstructured optical fiber based Fabry–Pérot interferometer as a humidity sensor utilizing chitosan polymeric matrix for breath monitoring”, Scientific reports, 10(1): 1-10, (2020).
  • [13] Özsoy, S., “Fiber optic”, Birsen Yayınevi, (2009).
  • [14] A. Weinert, “Plastic Optical Fibers: Principles, Components, Installation”, Berlin, Germany: Springer-Verlag, 37–45, (1999).
  • [15] Bass, M., & Van Stryland, E. W., “Fiber Optics Handbook: fiber, devices, and systems for optical communications”, (No. Sirsi) i9780071386234), Optical Society of America, (2002).
  • [16] Golnabi, H., “Using three different optical fiber designs to study humidity effect on the air refractive index”, Optics and Lasers in Engineering, 50(11): 1495-1500, 2012.
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Tepki Kuvveti Gözetleyicisi Tabanlı Tork Kontrolü

Erim Can ÖZÇINAR, Regaip Barkan UĞURLU

Biyogaz Reaktörlerinde Nem Tespiti İçin Fiber Optik Sensör Tasarimi ve Prototip Çalişmasi

Murat ŞAHİN, Şekip Esat HAYBER

Kemiğin Izotropik Olmayan Yapısının Modifiye Olmuş Gyroid Iskelelerle Taklidi; Bir Sonlu Eleman Analizi

Daver ALİ

Görünür Işık Haberleşme Sistemleri İçin Karartma Kontrol Biti Kullanılarak Geliştirilmiş Bir İletim Yönteminin Analizi

Kubilay Muhammed SÜNNETCİ, Mehmet SONMEZ

Synthesis and Characterization of Silver Nanoparticles and Coating with Chitosan

Mehmet ATEŞ, Ersen YILMAZ, Bülent KAR, İlknur KARS DURUKAN

Yanal Burulmalı Burkulma için Tanımlanan Elastik ve Plastik Sınır Uzunluklarına Gövde Buruşmasının Etkisinin Gövde Şekil Değiştirme Sonuçları ile Tahmini

Selcuk BAS

SWARA Yönteminde Sınıflandırma ve SMAA-2 Yöntemi ile Uygulama

Özer EROĞLU, Cevriye GENCER

SSC: Clustering Of Turkish Texts By Spectral Graph Partitioning

Taner UÇKAN, Cengiz HARK, Ali KARCİ

Renk Açma ve Vernikleme İşleminin Bazı Ahşap Malzemelerde Kor Halde Yanma Sıcaklığına Etkileri, Bölüm 2

Ahmet Cihangir YALINKILIÇ, Eyüp AKSOY, Musa ATAR, Hakan KESKİN

Analysis of Attack Angle Effect on Flow Characteristics Around Torpedo-Like Geometry Placed Near the Free-Surface via CFD

Muammer ÖZGÖREN, Alpaslan KILAVUZ, Tahir DURHASAN, Beşir ŞAHİN, Levent KAVURMACIOĞLU, Hüseyin AKILLI, Fuad SARIĞIGÜZEL