Benzin İçin Oksijenli Yakıt Katkıları
İçten yanmalı motorlardan salınan zararlı egzoz gazlarını azaltmak, yakıtın vuruntu direncini ve yenilenebilir yakıt kullanımını artırmak amacı ile benzine farklı oranlarda değişik oksijenli yakıt katkı maddeleri eklenmektedir. Sunulan bu çalışmada, geçmişte kullanılan yakıt katkıları ile günümüzde benzine eklenen oksijenli yakıt katkıları incelenmiştir. Ayrıca gelecek yıllarda kullanımı mümkün olan bazı oksijenli yakıt katkılarının üretim yöntemleri ve önemli kimyasal-fiziksel yakıt özellikleri değerlendirilmiştir.
Oxygenated Fuel Additives to Gasoline
In order to reduce harmful exhaust emissions emitted from the internal combustion engines, increase the knock resistance of the fuel and usage of renewable fuel, many different oxygenated additives are added to base gasoline. In this present study, fuel additives used in the past and oxygenated additives are used nowadays have been evaluated. Moreover, oxygenates that likely used in the future, their production processes and some important physical-chemical fuel properties have been assessed.
___
- [1] Yitao, S. H. E. N., SHUAI, S., Jianxin, W. A. N. G., and Jianhua, X. I. A. O., “Optimization of gasoline hydrocarbon compositions for reducing exhaust emissions”, Journal of Environmental Sciences, 21(9): 1208-1213, (2009).
- [2] Beşergil, B., “Yakıtlar ve Yağlar”, Ege Üniversitesi Basımevi, İzmir, (2009).
- [3] Safgönül, B., Ergeneman, M., Arslan, H. E. ve Soruşbay, C., “İçten Yanmalı Motorlar”, Birsen Yayınevi., (2013).
- [4] Nadim, F., Zack, P., Hoag, G. E., and Liu, S., “United States experience with gasoline additives”, Energy Policy, 29(1): 1-5, (2001).
- [5] Dabbagh, H. A., Ghobadi, F., Ehsani, M. R., and Moradmand, M., “The influence of ester additives on the properties of gasoline”, Fuel, 104: 216-223, (2013).
- [6] http://www.eesi.org/papers/view/fact-sheet-a-brief-history-of-octane
- [7] Lincoln, K. J., “The secret history of lead: special report”, The Nation March, 20: 11-45, (2000).
- [8] Thomas, V. M., “The elimination of lead in gasoline”, Annual Review of Energy and the Environment, 20(1): 301-324, (1995).
- [9] Gidney, J. T., Twigg, M. V., & Kittelson, D. B., “Effect of organometallic fuel additives on nanoparticle emissions from a gasoline passenger car”, Environmental science & technology, 44(7): 2562-2569, (2010).
- [10] Demirbas, A., Balubaid, M. A., Basahel, A. M., Ahmad, W., and Sheikh, M. H., “Octane rating of gasoline and octane booster additives”, Petroleum Science and Technology, 33(11): 1190-1197, (2015).
- [11] https://www.tupras.com.tr/uploads/Urunler2/KURSUNSUZ_BENZIN_95_OKTAN_243.pdf
- [12] https://www.epa.gov/gasoline-standards/reformulated-gasoline
- [13] Rodriguez-Anton, L. M., Hernandez-Campos, M., and Sanz-Pérez, F., “Experimental determination of some physical properties of gasoline, ethanol and ETBE blends”, Fuel, 112: 178-184, (2013).
- [14] Arteconi, A., Mazzarini, A., and Di Nicola, G., “Emissions from ethers and organic carbonate fuel additives: a review”, Water, Air, and Soil Pollution, 221(1-4): 405, (2011).
- [15] Awad, O. I., Mamat, R., Ali, O. M., Sidik, N. A. C., Yusaf, T., Kadirgama, K., and Kettner, M., “Alcohol and ether as alternative fuels in spark ignition engine: A review”, Renewable and Sustainable Energy Reviews, (2017).
- [16] Sharudin, H., Abdullah, N. R., Najafi, G., Mamat, R., and Masjuki, H. H., “Investigation of the effects of iso-butanol additives on spark ignition engine fuelled with methanol-gasoline blends”, Applied Thermal Engineering, 114: 593-600, (2017).
- [17] Sezer, I., and Bilgin, A., “Effects of methyl tert-butyl ether addition to base gasoline on the performance and CO emissions of a spark ignition engine”, Energy and Fuels, 22(2): 1341-1348, (2008).
- [18] Balki, M. K., Sayin, C., and Canakci, M., “The effect of different alcohol fuels on the performance, emission and combustion characteristics of a gasoline engine”, Fuel, 115: 901-906, (2014).
- [19] Hsieh, W. D., Chen, R. H., Wu, T. L., and Lin, T. H., “Engine performance and pollutant emission of an SI engine using ethanol–gasoline blended fuels”, Atmospheric Environment, 36(3): 403-410, (2002).
- [20] Canakci, M., Ozsezen, A. N., Alptekin, E., and Eyidogan, M., “Impact of alcohol–gasoline fuel blends on the exhaust emission of an SI engine”, Renewable Energy, 52: 111-117, (2013).
- [21] Mužíková, Z., Pospíšil, M., and Šebor, G., “Volatility and phase stability of petrol blends with ethanol”, Fuel, 88(8): 1351-1356, (2009).
- [22] Surisetty, V. R., Dalai, A. K., and Kozinski, J., “Alcohols as alternative fuels: An overview”, Applied Catalysis A: General, 404(1): 1-11, (2011).
- [23] Manzetti, S., and Andersen, O., “A review of emission products from bioethanol and its blends with gasoline. Background for new guidelines for emission control”, Fuel, 140: 293-301, (2015).
- [24] Silva, N. R., and Sodré, J. R., “Cold start and drivability characteristics of ethanol-methyl-t-butyl ether blend fuelled vehicle”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 215(5): 645-649, (2001).
- [25] Da Silva, R., Cataluna, R., de Menezes, E. W., Samios, D., and Piatnicki, C. M. S., “Effect of additives on the antiknock properties and Reid vapor pressure of gasoline”, Fuel, 84(7): 951-959, (2005).
- [26] De Menezes, E. W., Cataluña, R., Samios, D., and Da Silva, R., “Addition of an azeotropic ETBE/ethanol mixture in eurosuper-type gasolines”, Fuel, 85(17): 2567-2577, (2005).
- [27] Lince, D. P., Wilson, L. R., and Carlson, G. A., “Methyl tert-butyl ether (MTBE) contamination in private wells near gasoline stations in upstate New York”, Bulletin of environmental contamination and toxicology, 61(4): 484-488, (1998).
- [28] Ancillotti, F., and Fattore, V., “Oxygenate fuels: market expansion and catalytic aspect of synthesis”, Fuel Processing Technology, 57(3): 163-194, (1998).
- [29] De Menezes, E. W., and Cataluña, R., “Optimization of the ETBE (ethyl tert-butyl ether) production process”, Fuel Processing Technology, 89(11): 1148-1152, (2008).
- [30] Vauclair, C., Tarjus, H., and Schaetzel, P., “Permselective properties of PVA-PAA blended membrane used for dehydration of fusel oil by pervaporation”, Journal of Membrane Science, 125(2): 293-301, (1997).
- [31] Cataluña, R., da Silva, R., de Menezes, E. W., and Ivanov, R. B., “Specific consumption of liquid biofuels in gasoline fuelled engines”, Fuel, 87(15): 3362-3368, (2008).
- [32] Union, E. “Directive 2009/28/EC of the European Parliament and of the Council of 23 April 2009 on the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC”, Official Journal of the European Union, 5, (2009).
- [33] www. Global-bioenergies.com, “Fully Renewable ETBE”, (2017).
- [34] Shayan, S. B., Seyedpour, S. M., and Ommi, F., “Effect of oxygenates blending with gasoline to improve fuel properties”, Chinese journal of mechanical engineering, 25(4): 792-797, (2012).
- [35] Wu, X., Daniel, R., Tian, G., Xu, H., Huang, Z., and Richardson, D., “Dual-injection: The flexible, bi-fuel concept for spark-ignition engines fuelled with various gasoline and biofuel blends”, Applied Energy, 88(7): 2305-2314, (2011).
- [36] https://pubchem.ncbi.nlm.nih.gov/
- [37] Fogassy, G., Thegarid, N., Schuurman, Y., and Mirodatos, C., “From biomass to bio-gasoline by FCC co-processing: effect of feed composition and catalyst structure on product quality”, Energy and Environmental Science, 4(12): 5068-5076, (2011).
- [38] Timilsina, G. R., “Biofuels in the long-run global energy supply mix for transportation”, Phil. Trans. R. Soc. A, 372(2006): 20120323, (2014).
- [39] IEA, “Technology Roadmap: Biofuels for Transport”, International Energy Agency, (2011).
- [40] Bozkurt, Ö. D., Tunc, F. M., Bağlar, N., Celebi, S., Günbaş, İ. D., and Uzun, A., “Alternative fuel additives from glycerol by etherification with isobutene: Structure–performance relationships in solid catalysts”, Fuel Processing Technology, 138: 780-804, (2015).
- [41] Karinen, R. S., and Krause, A. O. I., “New biocomponents from glycerol, “Applied Catalysis A: General, 306: 128-133, (2006).
- [42] Beatrice, C., Di Blasio, G., Guido, C., Cannilla, C., Bonura, G., and Frusteri, F., “Mixture of glycerol ethers as diesel bio-derivable oxy-fuel: Impact on combustion and emissions of an automotive engine combustion system”, Applied Energy, 132: 236-247, (2014).
- [43] Fernando, S., Adhikari, S., Kota, K., and Bandi, R., “Glycerol based automotive fuels from future biorefineries”, Fuel, 86(17): 2806-2809, (2007).
- [44] Caetano, N. S., Loureiro, J. M., and Rodrigues, A. E., “MTBE synthesis catalysed by acid ion exchange resins: Kinetic studies and modeling of multiphase batch reactors”, Chemical engineering science, 49(24): 4589-4604, (1994).
- [45] Noureddini, H., Dailey, W. R., and Hunt, B. A., “Production of ethers of glycerol from crude glycerol-the by-product of biodlesel production”, Advances in Environmental Research, 2(2): 232 – 243, (1998).
- [46] Melero, J. A., Vicente, G., Morales, G., Paniagua, M., and Bustamante, J., “Oxygenated compounds derived from glycerol for biodiesel formulation: Influence on EN 14214 quality parameters”, Fuel, 89(8): 2011-2018, (2010).
- [47] Wessendorf, R., “Glycerol derivatives as fuel components”, Erdol and Kohle Erdgas Petrochemie, 48(3): 138-143, (1995).
- [48] Jaecker-Voirol, A., Durand, I., Hillion, G., Delfort, B., and Montagne, X., “Glycerin for new biodiesel formulation”, Oil and Gas Science and Technology-Revue de l'IFP, 63(4): 395-404, (2008).
- [49] Zhou, C. H. C., Beltramini, J. N., Fan, Y. X., and Lu, G. M., “Chemoselective catalytic conversion of glycerol as a biorenewable source to valuable commodity chemicals”, Chemical Society Reviews, 37(3): 527-549, (2008).
- [50] Wan Isahak, W. N. R., Che Ramli, Z. A., Ismail, M., Mohd Jahim, J., and Yarmo, M. A., “Recovery and purification of crude glycerol from vegetable oil transesterification”, Separation and Purification Reviews, 44(3): 250-267, (2015).
- [51] OECD/FAO, OECD-FAO, “Agricultural Outlook 2011”, OECD Publishing, 78, (2011).
- [52] Calero, J., Luna, D., Sancho, E. D., Luna, C., Bautista, F. M., Romero, A. A., and Verdugo-Escamilla, C., “An overview on glycerol-free processes for the production of renewable liquid biofuels, applicable in diesel engines”, Renewable and Sustainable Energy Reviews, 42: 1437-1452, (2015).
- [53] Mota, C. J., da Silva, C. X., Rosenbach Jr, N., Costa, J., and da Silva, F., “Glycerin derivatives as fuel additives: the addition of glycerol/acetone ketal (solketal) in gasolines”, Energy and Fuels, 24(4): 2733-2736, (2010).
- [54] Jaecker-Voirol, A., Delfort, B., Montagne, X., Durand, I., and Hillion, G., “Glycerol derivatives for diesel fuel reformulation”, (No. 2005-01-2203): SAE Technical Paper, (2005).
- [55] Bradin, D., Grune, G.L., Trivette, M. ‘US 20090013591 A1’, Alternative fuel composition for use in gasoline, diesel, marine biodiesel, jet and flexible fuel engines, comprises fuel/alcohol blend and glycerol ether mixture of glycerol ethers, (2009).
- [56] Fukuda, H., Fujii, T., and Ogawa, T., “Microbial production of C3-and C4-hydrocarbons under aerobic conditions”, Agricultural and biological chemistry, 48(6): 1679-1682, (1984).
- [57] Di Serio, M., Casale, L., Tesser, R., & Santacesaria, E., “New process for the production of glycerol tert-butyl ethers”, Energy & Fuels, 24(9): 4668-4672, (2010).
- [58] Kiatkittipong, W., Intaracharoen, P., Laosiripojana, N., Chaisuk, C., Praserthdam, P., and Assabumrungrat, S., “Glycerol ethers synthesis from glycerol etherification with tert-butyl alcohol in reactive distillation”, Computers and Chemical Engineering, 35(10): 2034-2043, (2011).
- [59] Klepáčová, K., Mravec, D., and Bajus, M., “Etherification of glycerol with tert-butyl alcohol catalysed by ion-exchange resins”, Chemical Papers, 60(3): 224-230, (2006).
- [60] Chang, J. S., Zhang, Y. C., Chen, C. C., Ling, T. R., Chiou, Y. J., Wang, G. B., ... and Chou, T. C., “One-step synthesis of gasoline octane booster and diesel fuel from glycerol and tert-butyl alcohol”, Industrial and Engineering Chemistry Research, 53(13): 5398-5405, (2014).
- [61] Kiatkittipong, W., Suwanmanee, S., Laosiripojana, N., Praserthdam, P., and Assabumrungrat, S., “Cleaner gasoline production by using glycerol as fuel extender”, Fuel Processing Technology, 91(5): 456-460, (2010).
- [62] Kiatkittipong, W., Thipsunet, P., Goto, S., Chaisuk, C., Praserthdam, P., and Assabumrungrat, S., “Simultaneous enhancement of ethanol supplement in gasoline and its quality improvement”, Fuel Processing Technology, 89(12): 1365-1370, (2008).
- [63] Kiatkittipong, W., Yoothongkham, K., Chaisuk, C., Praserthdam, P., Goto, S., and Assabumrungrat, S., “Self-etherification process for cleaner fuel production”, Catalysis letters, 128(1-2): 154, (2009).
- [64] Vallinayagam, R., Vedharaj, S., Yang, W. M., Roberts, W. L., and Dibble, R. W., “Feasibility of using less viscous and lower cetane (LVLC) fuels in a diesel engine: a review”, Renewable and Sustainable Energy Reviews, 51: 1166-1190, (2015).
- [65] Tan, Q., and Day, D. F., “Bioconversion of limonene to α-terpineol by immobilized Penicillium digitatum”, Applied microbiology and biotechnology, 49(1): 96-101, (1998).
- [66] Vallinayagam, R., Vedharaj, S., Naser, N., Roberts, W. L., Dibble, R. W., & Sarathy, S. M., “Terpineol as a novel octane booster for extending the knock limit of gasoline”, Fuel, 187: 9-15, (2017).
- [67] Lee, S. K., Chou, H., Ham, T. S., Lee, T. S., and Keasling, J. D., “Metabolic engineering of microorganisms for biofuels production: from bugs to synthetic biology to fuels”, Current opinion in biotechnology, 19(6): 556-563, (2008).
- [68] Rankovic, N., Bourhis, G., Loos, M., & Dauphin, R., “Understanding octane number evolution for enabling alternative low RON refinery streams and octane boosters as transportation fuels”, Fuel, 150: 41-47, (2015).
- [69] Kim, D. W., Kim, C. W., Koh, J. C., and Park, D. W., “Synthesis of dimethyl carbonate from ethylene carbonate and methanol using immobilized ionic liquid on amorphous silica”, Journal of Industrial and Engineering Chemistry, 16(3): 474-478, (2010).
- [70] Tundo, P., and Selva, M., “The chemistry of dimethyl carbonate”, Accounts of Chemical Research, 35(9): 706-716, (2002).
- [71] Wen, L. B., Xin, C. Y., and Yang, S. C., “The effect of adding dimethyl carbonate (DMC) and ethanol to unleaded gasoline on exhaust emission”, Applied Energy, 87(1): 115-121, (2010).
- [72] Bhanage, B. M., Fujita, S. I., Ikushima, Y., and Arai, M., “Transesterification of urea and ethylene glycol to ethylene carbonate as an important step for urea based dimethyl carbonate synthesis”, Green Chemistry, 5(4): 429-432, (2003).
- [73] McCormick, R. L., Ratcliff, M. A., Christensen, E., Fouts, L., Luecke, J., Chupka, G. M., and Boot, M., “Properties of oxygenates found in upgraded biomass pyrolysis oil as components of spark and compression ignition engine fuels”, Energy and Fuels, 29(4): 2453-2461, (2015).
- [74] Shankar, V. S. B., Al-Abbad, M., El-Rachidi, M., Mohamed, S. Y., Singh, E., Wang, Z., and Sarathy, S. M., “Antiknock quality and ignition kinetics of 2-phenylethanol, a novel lignocellulosic octane booster”, Proceedings of the Combustion Institute, 36(3): 3515-3522, (2017).
- [75] Tian, M., Van Haaren, R., Reijnders, J., and Boot, M., “Lignin derivatives as potential octane boosters”, SAE International Journal of Fuels and Lubricants, 8(2015-01-0963): 415-422, (2015).
- [76] Zhong, S., Daniel, R., Xu, H., Zhang, J., Turner, D., Wyszynski, M. L., and Richards, P., “Combustion and emissions of 2, 5-dimethylfuran in a direct-injection spark-ignition engine”, Energy and Fuels, 24(5): 2891-2899, (2010).
- [77] Román-Leshkov, Y., Barrett, C. J., Liu, Z. Y., and Dumesic, J. A., “Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates”, Nature, 447(7147): 982-985, (2007).
- [78] Christensen, E., Yanowitz, J., Ratcliff, M., and McCormick, R. L., “Renewable oxygenate blending effects on gasoline properties”, Energy and Fuels, 25(10): 4723-4733, (2011).
- [79] Daniel, R., Tian, G., Xu, H., Wyszynski, M. L., Wu, X., and Huang, Z., “Effect of spark timing and load on a DISI engine fuelled with 2, 5-dimethylfuran”, Fuel, 90(2): 449-458, (2011).
- [80] https://cameochemicals.noaa.gov/chris/MTT.pdf
- [81] Badawy, T., Williamson, J., and Xu, H. “Laminar burning characteristics of ethyl propionate, ethyl butyrate, ethyl acetate, gasoline and ethanol fuels”, Fuel, 183: 627-640, (2016).