Kalıp frezeleme uygulamaları için bir uzman sistem yazılımı

Bu çalışmada en önemli talaşlı imalat işlemlerinden biri olan kalıp frezeleme işlemi için geliştirilmiş bir uzman sistem yapısı ele alınmıştır. Oluşturulan, sistem iş parçası geometrisi ve malzemesi, kaba, orta veya ince olmak üzere işleme türü, HSS, kaplamalı yeya kaplamasız sinterlenmiş karbür olmak üzere takım malzemesi bilgilerini girdi olarak almakta ve kullanılacak takım tipi, iş parçası bağlama yöntemi, frezeleme yöntemi (aynı veya karşıt yönlü veya kontur, zig zag,paralel, dairesel, helisel işleme vb), kullanılacak ofset değerleri gibi hususlarda kullanıcıya çeşitli tavsiyelerde bulunmaktadır. Geliştirilen uzman sistem kural tabanlı bir sistem olup kurallar kalıp frezeleme konusunda uzman çok sayıdaki mühendis ile yapılan karşılıklı görüşmelerden ve çeşitli CAM programlarının incelenmesi sonucunda elde edilmiştir. Kalıp frezeleme işlemi gerçekten komplike ve gerçekleştirmesi zor bir işlemdir. İşlenecek yüzeyin karmaşıklığı hemen her kalıbın kendine özgü oluşu, dikkate alınması gereken pek çok kural bulunması ve yapılan hataların yüksek maliyetlere neden olması bu alanda çalışan mühendisllerin konuya hakim olabilmek için yıllarca uygulama yapmasını kaçınılmaz kılmaktadır. Tasarlanan uzman sistem bu konuda edinilmiş tecrubelerin yem kullanıcılara aktarılabilmesi için son derece kullanışlı bir araçtır. Sistem bir anlamda talaşlı imalat üzerine çalışan mühendisler arasında iletişim görevi de görecek geliştirilebilir yapısı ile sürekli olarak edinilen yeni bilgileri kapsayabilecektir.

This study deals with ah expert system structure developed for mould milling process, one of the most important machining techniques. The work piece geometry and material, the degree of machining, such as rough, medium and fine apparatus material data such as HSS, plated or non-plated sintered carbide are entered as inputs to the system developed, which in turn outputs suggestions to the user on topics such as the type of apparatus method of connecting the work piece, milling method (same or opposite direction, or contour, zigzag, paralle1, helical machining, and so on), and the offset values. The developed export system is based on rules, which are gathered through interviews with many engineers who are experts on the topic and also through investigation of many CAM programs. Mould milling process is really a complicated and difficult process The complexity of the surface to be machined the uniqueness of almost every mould, many rules to be taken into account, and the high cost of a possible mistake necessitates that the engineers practice for many years in order to gain insight to the topic. The designed expert system is a quito useful tool for the collective expenences to the new users from another point of view, the designed system will serve as a basis of communication among engineers working on machining processes It is also open to development with its upgradeable structure.

___

  • 1. Kurt, A. 1998. Uzman Sistem Geliştirmede Endüstri Mühendisliğinin Rolü. Gazi Ü. End. Müh. Anabilim Dalı Yüksek Lisans Tezi, Ankara. s. 126.
  • 2. Mookherjee, R. and B. Bhattacharyya., 2001. "Development of an Expert System For Turning and Rotating Tool Selection in a Dynamic Environment", Journal of Materials Processing Technology, p. 306-311.
  • 3. Wong, S. V., A. M. S. Hamouda and M. A. El Baradie., 1999. "Genaralized Fuzzy Model For Metal Cutting Data Selection", Journal of Materials Processing Technology, p. 310-317.
  • 4. Bagshawa, R. W. and S. T. Newman. 2002. "Manufacturing Data Analysis of Machine Tool Errors Within a Contemporary Small Manufacturing Enterprise", Journal of Materials Processing Technology, p. 1065-1080.
  • 5. Mursec, B. and T. PLOJ. 2001. "Expert System Optis For Optimization of Cutting Conditions and Modern Information Systems of Selection of Tools and Cutting Conditions In Cutting Processes", Urednistvo Capopisa Strojartvo, Zagreb. p.1-2.
  • 6. Özbayrak, M. and R. Bell. 2002. "A knowledge-based Decision Support System for the Management of Parts and Tools in FMS", Elsevier Science. p. 1-10.
  • 7. Chan, F. T. S., B. Jıanga, H. Tangb and K. Nelson. 2000. "The Development of intelligent Decision Support Tools to Aid the Design of Flexible Manufacturing Systems", International Journal of Production Economics, Volume 65, Issue 1, p. 73-84.
  • 8. Çakır, C. 1998. "Talaşlı İmalat İşlemlerinde Problem Çözücü Bir Uzman Sistem", 8. Uluslararası Makina Tasarım ve İmalat Kongresi, Ankara s.45-54.
  • 9. Çakır, C. 2000. "Modern Talaşlı İmalat Yöntemleri", Vipaş, Bursa. s. 219-346.
  • 10. Cebeci U. 1994. "Hücresel İmalatın Başlangıç Aşamaları Için Uzman Sistem Yaklaşımı", İ.T.Ü. Fen Bil. Ens. Doktora Tezi, İstanbul.