$([30,-30]_2)$ fiber takviyeli tabakalı termoplastik kompozit levhalarda delik-kenar arasında oluşan elasto-plastik gerilmeler
Bu çalışmada fiber takviyeli termoplastik delikli kompozit bir levhanın tek yönde çekmeye maruz kalması durumunda delik çapına bağlı olarak levhalarda delikten kenara kadar meydana gelen artık gerilmeler incelenmiştir. Delik tipi daire olarak ele alınmıştır. Çözüm tekniği olarak sonlu elemanlar metodu kullanılmıştır. Çözümlerde delik yarıçapı r=5, 15, 25 ve tabakalar $([30,-30]_2)$ şeklinde alınarak çözümler yapılmış, sonuçlar tablo ve grafiklerde gösterilmiştir.
In this study, fiber reinforced thermoplastic composite laminated plates with a different hole diameter are subjected to in-plane forces. The hole diameters are chosen as d=10, 30, 50 and the configuration is $([30,-30]_2)$. The residual stresses are found from hole to the edge of the plate. The elasto-plastic numerical solution was carried out by using Finite Elements Technique for some iteration numbers. Residual stresses and expansion of plastic zone have been illustrated in tables and figures.
___
1.Azzi, V. D. ve Tsai, S. W., "Anisotropic Strength of Composite", Expl. Mech., 283-286, 1965.2.Bathe, K. J., Finite Element Procedures in Engineering Analysis, Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1982.
3.Chou, P. C„ McNamer, B. M. and Chou, D. K., "The Criterion of Laminated Media", Journal of Composite Materials, 7, 22-35, 1973.
4.Chou,T.W., Kelly, A. ve Okura A., "Fibre-Reinforced Metal-Matrix Composites" ,Journal of Composite Materials ,16:187-206, 1985.
5.Hoggatt, J. T. "Reinforced Structural Composites Using Thermoplastic Matrices", The 5,h National SAMPE Technical Conference, Materials and Process for the 70's Cost Effectiveness and Reliability 5, 91-102, 1973.
6.Hoggatt, J. T., ''Thermoplastic Resin Composite", The 20th National SAMPE Symposium, Technology in Transition, 20, 606-617, 1975.
7.Jones, Robert M., "Mechanics of Composite Materials", McGraw-Hill Kogakusha Ltd., 1975
8.Karakuzu, R., Özel, A. ve Sayman, O., "Elasto-plastic Finite Element Analysis of Metal Matrix Plates with Edge Notches", Computers & Structures, 63, 551-558, 1997.
9.Karakuzu, R. ve Sayman, O., "Elasto-plastic Finite Element Analysis of Orthotopic Rotating Discs with holes", Computers & Structures. 51, 695-703, 1991.
10.Kays, A. O. ve Hunter, J. D., "Characterization of Some Solvent Resistant Thermoplastic Matrix Composites", Composite materials: Quality Assurance and Processing, ASTM-STP 797, Browning, ed. pp., 119-132, 1983.
11.Muzzy, J. D. ve Kays, A. O., 'Thermoplastics vs. Thermosetting Structural Composites", Polymer Composites, 5,169-172, 1984.
12.Lin, C. C. ve Kuo, C. C., "Buckling of Laminated Plates with Holes", Journal of Composite Materials, V.23, p:536-553, 1989.
13.Yapıcı, A., Tarakçıoğlu, N., Akdemir, A., ve Avcı, A.,"Elasto-Plastic Stresses Analysis of Thermoplastic Matrix Composite Laminated Plates under In-Plane Loading", Journal of Thermoplastic Composite Materials, Vol. 14, March 2001
- ISSN: 1300-3402
- Yayın Aralığı: Yılda 4 Sayı
- Başlangıç: 1957
- Yayıncı: TMMOB MAKİNA MÜHENDİSLERİ ODASI