Yüzey kaplamasına eklenen amonyum fosfat ve borik asidin yanma direnci üzerine etkisinin araştırılması

Özet Çalışmanın amacı: Bu çalışmanın amacı, yüzey kaplamasına eklenen amonyum polifosfat (APP) ve borik asidin (BA) yanma direnci üzerine etkisini belirlemek olacaktır. Çalışma alanı: Ahşap esaslı levhalarda, yanmazlık özelliğinin geciktirilmesini sağlamak Materyal ve Yöntem: Yüzey kaplama karışımı kalsit, tutkal, yanmayı geciktirici kimyasallar ve su karışımından oluşmaktadır. Karışım içindeki tutkal (%10), BA ve APP (%1, %3 ve %5) oranı, kalsitin tam kuru ağırlığına göre belirlenmiştir. Yüzeyi 0.25 mm kalınlıktaki karışım ile kaplanmış MDF test örneklerinin yanma testleri ASTM E 69 standartlarına göre yapılmıştır. Örneklerin ağırlık kaybı miktarları dijital terazi ile belirlenirken, sıcaklık, O2, CO ve NO değerleri Testo 340 M gaz analizörü ile ölçülmüştür. Her test için 30 saniye aralıklar ile 20 ölçüm yapılmıştır. Sonuçlar: Elde edilen sonuçlara göre; kalsit ile kaplamanın yanı sıra yanmayı geciktirici (FR) kimyasal eklenmesi yanma direncini artırmıştır. En düşük ağırlık kaybı APP %5 ile muamele edilmiş örneklerde bulunmuştur. Araştırma vurguları: Ahşap esaslı levhaların yüzeylerinin kaplanması ve bu kaplama içerisine FR kimyasalı ve mineral eklenmesi yanma özelliklerini geciktirmektedir

Investigation of the effect on combustion resistance of ammonium polyphosphate and boric acid chemicals added to surface coating

Abstract Aim of study: The purpose of this study were determined the effect of ammonium polyphosphate (APP) and boric acid (BA) as surface coating materials on combustion resistance of MDF panels. Area of study: To ensure the retardation of combustion properties of wood based panels Material and Methods: Surface coating mixture consists of calcite, glue, fire retardant (FR) and water. The amount of glue (10%), APP and BA (1%, 3% and 5%) in the mixture was determined by the oven dry weight of calcite. Combustion tests of Medium Density Fiberboard (MDF) test specimens coated with 0.25 mm thickness of this mixture were carried out according to ASTM E 69 standards. Temperature, O2, CO and NO contents of samples were measured with Testo 340 M gas analyzer while weight loss was measured with digital scales. For each test, 20 measurements were recorded at intervals of 30 seconds. Main results: According to the obtained results, besides calcite coating, the increase of FR addition rate increased the resistance of combustion. It was found that the weight loss of the samples treated with APP 5% was the lowest (66,7%). Research highlights: The coating of the surfaces of wood-based boards and the addition of FR chemistry and mineral to this coating delays the burning properties

___

  • 1. Roger R.M. 2005. Handbook of wood chemistry and wood composites, p 383.
  • 2. Hashim R., Murphy R.J., Dickinson D.J., Dinwoodie J.M. 1994. The mecanical properties of boards treated with vapor boron, Forest Products Journal 44,73-79.
  • 3. Akbulut T., Kartal S.N., Green, F. 2004. Fiberboards treated with N’-N-(1, 8-Naphthalyl) hydroxylamine (NHA-Na), borax, and boric acid, Forest Prod. J. 54(10): 59–64
  • 4. Sparkes T. 1993. Substrate selection for end use applications,” Koln, Germany: European Plastic Laminates Forum, p. 27–31.
  • 5. Ayrılmıs N. 2007. effect of fire retardants on ınternal bond strength and bond durability of structural fiberboard, Building and Environment, Elsevier Volume 42, Issue 3, March, Pages 1200-1206.
  • 6. ASTM E-69, 2007. Standart test method for combustible properties of treated wood by the fire-tube apparatus, American Society for Testing Materials, Philadelphia
  • 7. Sweet M.S., LeVan S.L., White R.H., Tran H.C., and Degroot R. 1996. Fire performance of wood treated with combined fire-retardant and preservative systems, Research Paper FPL–RP–545. US Dept. Agriculture, Forest Service, Forest Products Laboratory, Madison, WI.
  • 8. Tomak E. D., Baysal E., and Peker H. 2012. The effect of some wood preservatives on the thermal degradation of Scots pine, Thermochimica Acta, 547, 76-82.
  • 9. Özdemir F., Tutuş A. 2016. Effects of coating with calcite togetter with various fire retardants of on the fire properties of particleboard, BioResources, 11(3), 6407-6415.
  • 10. Özçifçi A., and Okçu O. 2008. Impacts of some chemicals on combustion properties of impregnated laminated veneer lumber (LVL), Journal of materials processing technology, 199(1), 1-9.
  • 11. İstek A., Aydemir D., and Eroğlu H. 2013. Combustion properties of medium-density fiberboards coated by a mixture of calcite and various fire retardants. Turkish Journal of Agriculture and Forestry 37.5 (2013): 642-648.
  • 12. Hashim R., Sulaiman O., Kumar R. N., Tamyez P. F., Murphy R. J., and Ali Z. 2009. Physical and mechanical properties of flame retardant urea formaldehyde medium density fiberboard, Journal of Materials Processing Techonology, 209(2), 635-640.
  • 13. Wan Hanafi, W.Z.A., and Hornsby P.R. 1993. Smoke suppression and fire retardancy in unsaturated polyesters hydrated fillers, Plastics, Rubber Compos. Process. Appl. 19 (3), 175–184.
  • 14. Temiz A., Gezer E. D., Yildiz, U. C., and Yıldız, S. 2008. Combustion properties of alder (Alnus glutinosa L.) Gaertn.subsp. barbata (CA Mey) Yalt. and southern pine (Pinus sylvestris L.) wood treated with boron compounds, Construction and Building Materials, 22(11), 2165-2169.
  • 15. Baysal E. 2003. Fire properties of beech wood impregnated with fire retardants and naturel extractives, Fırat University, Journal of Science and Engineering, 15, pp 163-174.
  • 16. Kolmann F. F., and Cote Jr. W. A. 1968. Principles of Wood Science and Techonology Vol. I. Solid Wood. Springer-Verlag.
  • 17. Özdemir F., and Tutus A. 2013. Effects of fire retardants on the combustion behavior of high-density fiberboard. BioResources 8.2: 1665-1674.
  • 18. Yapici F., Uysal B., Kurt Ş., Esen, R., and Özcan C. 2011. Impacts of impregnation chemicals on finishing process and combustion properties of oriental beech (Fagus Orientalis L.) wood, BioResources, 6(4), 3933-3943.
  • 19. Ashley R. J., and Rothon R. N. 1991. Use of inorganic fillers to reduce the flammability of polimers, Plastic Rubber and Composites Processing and Aplications, 15(1), 19-21.
  • 20. Mouritz A. P., Mathys Z., and Gibson A. G. 2006. Heat release of polymer composites in fire, Composites Part A: Applied science and manufacturing, 37(7), 1040-1054.
  • 21. Winandy J. E., Wang Q., and White R. H. 2008. Fire-retardant-treated strandboard: properties and fire performance,” Wood and fiber sci. 40(1), 62-71.
  • 22. Ustaomer D. 2008. Odun ve odun esaslı levhalar için yanma özellikleri, yanmayı geciktirici kimyasal maddeler ve bu maddelerin etkileri. Düzce University Faculty of Forestry, VI. The National Student Council of Forestry Faculty, 418-425 pp. 23. Altuntaş E., Tufan S., and Alma, M.H. 2016. Farklı bor bileşik kullanılarak mdf-aype odun plastik kompozitlerin yangına dayanıklılığının araştırılması. Kahramanmaras Sutcu Imam University Journal of Engineering Sciences 19.3: 19-23.
Kastamonu Üniversitesi Orman Fakültesi Dergisi-Cover
  • ISSN: 1303-2399
  • Yayın Aralığı: Yılda 3 Sayı
  • Başlangıç: 2001
  • Yayıncı: Kastamonu Üniversitesi
Sayıdaki Diğer Makaleler

Sapsız Meşe (Quercus Petraea) Odununun Alternatif Isıtma Yöntemleri ile Vakumlu Kurutulması

SUAT ALTUN, MUSTAFA ALTAY EROĞLU

Landslide susceptibility analysis of YBasin in Bingol through the index method

ALAADDİN YÜKSEL, Vedat AVCİ

Libya’nın Green Mountain bölgesinde kök-ur nematodu (Meloidogyne incognita) ile bağlantılı mantarların izolasyonu ve yumurtaların açılımı üzerine etkisi

Issa MOSA, Mahmoud EHWAETI, Erol AKKUZU

Yaşlı Pinus sylvestris L. orman ekosistemlerinde Temel Bileşenler Analizi kullanılarak bazı akarsu kalite parametrelerinin değerlendirilmesi

İbrahim YURTSEVEN

Structural and spatial patterns of Isoberlinia species in a disturbed community forest (Benin, West Africa)

Cedric A GOUSSANOU, Brice A TENTE, Gaston AKOUEHOU, Valere K SALAKO, Romain L

Geri Dönüşüm Liflerinin Kullanıldığı Odun Plastik Kompozitlerin Yangın, Termal ve Mekanik Özellikleri Üzerine Yangın Geciktiricilerin Etkileri Özet Çalışmanın amacı: Bu çalışmada lifsel atıklar ile üretilen odun

ERTUĞRUL ALTUNTAŞ, Eyup KARAOĞUL, M. Hakkı ALMA

Kızılçam (Pinus brutia Ten.) Odunundan Yanmayı Geciktirici Kimyasallar Kullanarak Yanmaya Karşı Dirençli Kağıt Üretimi

AHMET TUTUŞ, Mustafa ÇİÇEKLER, Hatice Gülşah ÖZKAN

Kontrplakta farklı değişkenlerin vida çekme direnci üzerindeki etkisi

HÜSEYİN YÖRÜR, ÖNDER TOR, MUHAMMED NURİ GÜNAY, Emre BIRINCI

İbrahim Yurtseven

Odun Külü ve Mikrokristalin Selüloz İle Doldurulmuş Poliester Kompozitler

KADİR KARAKUŞ, İLKAY ATAR, İBRAHİM HALİL BAŞBOĞA, Fatma BOZKURT, FATİH MENGELOĞLU