Ortoftalik Poliester Reçinesi ve Stiren ile Modifiye Edilmiş Odunun Biyolojik Performansı

Biological Performance of Wood Modified with Orthophthalic Polyester Resin and Styrene

Aim of study: This study evaluated the improvements in dimensional stability and biological resistance of wood against fungal degradation, and termites by radiation-induced in situ copolymerization of three types of low viscosity-unsaturated polyester resin with styrene. Material and methods: Radiation polymerization of unsaturated polyester resin with styrene in a viscous system was performed at ambient temperature using gamma (γ)-rays. In the study, water absorption and dimensional stability of the modified wood specimens were first determined. The wood specimens were also tested against decay and mold fungi and termites in laboratory. Main results: Results after 24-h water immersion of modified wood specimens showed that more than 70% of water repellent effectiveness was obtained in the wood specimens after modifications with the three formulations of tested chemical mixtures; however, the highest anti-swell efficiency values were observed in the specimens treated with the only one type of treating mixtures. Mold resistance tests showed that the treating mixtures tested were not completely inhibited mold growth; however, some improvements in mold scores were seen when compared to control wood specimens. Results showed that after modifications, the specimens showed increased resistance against the fungi and termites considering untreated control specimens. Highlights: Modifications by styrene and UP resin with different formulations and gamma irradiation greatly improved water absorption and volumetric swell of test specimens in comparison with unmodified control specimens.

___

  • ASTM D 4445-10 (2012). Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method), Destination D4445-10, Virginia Polytechnic Institute pursuant to License Agreement.
  • Aziz, S. H., Ansell, M. P., Clarke, S. J., & Panteny, S. R. (2005). Modified Polyester Resins for Natural Fibre Composites. Composites Science and Technology, 65, 525–535.
  • Baki, H., Yalcin, O. & Hakki, A. (1993). Improvement of Wood Properties by Impregnation with Macromonomeric Initiators. Journal of Applied Polymer Science, 47, 1097.
  • Borysiak, S. A. (2010). Study of Transcrystallinity in Polypropylene in The Presence of Wood Irradiated with Gamma Rays. Journal of Thermal Analysis and Calorimetry, 101, 439–45.
  • Cao, X. & Lee, L. J. (2003). Control of Shrinkage and Residual Styrene of Unsaturated Polyester Resins Cured at Low Temperatures: I. Effect of Curing Agents. Polymer, 44, 1893-1902.
  • Chawla, J. S. (1985). Degradation of Ligno-Cellulose Biomass. Holzforschung und Holzverwertung, 37(2), 101-105.
  • Despot, R, Hasan, M, Rapp, A. O, Brischke, C, Humar, M, Welzbacher, C.R and Ražem, D. (2012). Changes in Selected Properties of Wood Caused by Gamma Radiation. Gamma Radiation, F. Adrovic, Ed., Intech, 281-304.
  • Devi, R. R., Ali, I. and Maji, T. K. (2003). Chemical Modification of Rubber Wood with Styrene in Combination with a Crosslinker: Effect on Dimensional Stability and Strength Property. Bioresource Technology, 88, 185-188
  • Dholakiya, B. (2012). Unsaturated Polyester Resin for Specialty Applications. in “Polyester,” Hosam El-Din M. Saleh, Ed., Intech Open, 167-202.
  • EN (1997a) EN 113: Wood Preservatives—Test Method for Determining the Protective Effectiveness Against Wood Destroying Basidiomycetes—Determination of the Toxic Values. No: 1-2, European Committee for Standardization, Central Secretariat: rue de Stassart 36, B-1050 Brussels.
  • EN (1997b) EN 84: Wood Preservatives, Accelerated Ageing of Treated Wood Prior to Biological Testing. Leaching Procedure. European Committee for Standardization, Central Secretariat: rue de Stassart 36, B-1050 Brussels.
  • Hill, C. A. S. (2006). Wood Modification - Chemical, Thermal and Other Processes. Wiley Series in Renewable Resources, Wiley and Sons, Chichester, UK, 260.
  • Ibach, R. and Rowell, R.M. (2013). Lumen modifications. In “Wood Chemistry and Wood Composites,” Second Edition, R.M. Rowell, Ed., CRC Press Taylor and Francis Group, New York, 599-626.
  • Japanese Standards Association (JIS K) (2004) Japan Industrial Standard (JIS) K 1571. Test methods for determining the effectiveness of wood preservatives and their performance requirements. Japanese Standards Association, Tokyo.
  • Jurkin, T. and Pucic, I. (2006). Post-Irradiation Crosslinking of Partially Cured Unsaturated Polyester Resin. Radiation Physics and Chemistry, 75, 1060-1068.
  • Katsumata, N., Yoshimura, T., Tsunoda, K., & Imamura, Y. (2007a). Resistance of Gamma-Irradiated Sapwood of Cryptomeria Japonica to Biological Attacks. Journal of Wood Science, 4, 320–323.
  • Katsumata, N., Tsunoda, K., Toyoumi, A., Yoshimura, T., & Imamura, Y. (2007b). Comparative termite (Isoptera: Rhinotermitidae) Feeding Preference Among Gamma-Irradiated and Unirradiated Wood. Sociobiology, 1, 155-162.
  • Katsumata, N., Yoshimura, T., Tsunoda, K., & Imamura, Y. (2007c). Termite feeding preference to four wood species after gamma irradiation. J Wood Sci, 53, 361-364.
  • Mahmoud, A. A., Eissa, A. M. F., Omar, M. S., El-Sawy, A. A. & Shaaban, A. F. (2001). Improvements of White Pine Wood Properties by Impregnation with Unsaturated Polyesters in Admixture with Styrene. J of Applied Polymer Science, 82, 1410-1416.
  • Rowell, R. M., Ibach, R. E., McSweeny, J., & Nilsson, T. (2009). Understanding Decay Resistance, Dimensional Stability and Strength Changes in Heat Treated and Acetylated Wood. Wood Material Science and Engineering, 4(1-2), 14-22.
  • Rowell, R. M. (2016). Dimensional Stability and Fungal Durability of Acetylated Wood. Drewno, 59(197), 139-150.
  • Sandberg, D., Kutnar, A. & Mantanis, G. (2017). Wood Modification – A Review. iForest, 10: 895-908.
  • Seifert, K. (1964). Zur Chemie gammabestrahlten Holzes. Holz als Roh- und Werkstoff, 22(7), 267-275.
  • Unger, A., Schniewind, A. P., & Unger, W. (2001). Conservation of Wood Artifacts: A Handbook. Springer Science & Business Media, Springer- Verlag Berlin Heidelberg, 578.
Kastamonu Üniversitesi Orman Fakültesi Dergisi-Cover
  • ISSN: 1303-2399
  • Yayın Aralığı: Yılda 3 Sayı
  • Başlangıç: 2001
  • Yayıncı: Kastamonu Üniversitesi
Sayıdaki Diğer Makaleler

Determination of Seed Morphologies and Effect of Pretreatments on Germination of Crataegus monogyna (Jac.) and Crataegus azarolus var. pontica (K. Koch) K. I. Chr Seeds

AŞKIN GÖKTÜRK, Ferhat YILDIRIM

Leptatherum (Poaceae): Türkiye Florası İçin Yeni Bir Cins Kaydı

Salih TERZİOĞLU, Kezban ÖZKAN

Borik Asit ile Emprenye Edilmiş Karaçam Odununun Radyasyon Zırhlama Özelliklerinin İncelenmesi

OSMAN EMRE ÖZKAN

Artvin (Türkiye)’de Beş Akdeniz Enklavının Yaprak Mikromorfolojisi ve Anatomisi

Melahat OZCAN, Sumeyye YILMAZ

Seydişehir İlçesinin (Konya-Türkiye) Çevresindeki Makromantarlarda Ağır Metal Birikimlerinin Araştırılması

Sinan ALKAN, GIYASETTİN KAŞIK, Celaleddin ÖZTÜRK

Ortoftalik Poliester Reçinesi ve Stiren ile Modifiye Edilmiş Odunun Biyolojik Performansı

SAİP NAMİ KARTAL, Ömer KANTOĞLU

Farklı Fidanlıklarda Ekim Şekli ve Yetiştirme Sıklığının Dar Yapraklı Dişbudak Fidanlarının Morfolojik Özelliklerine Etkisi

Cemal FİDAN, Ali Kemal ÖZBAYRAM, H. Cemal GÜLTEKİN, Hülya TAMYÜKSEL

Melahat OZCAN, Sumeyye YILMAZ

Bazı Ağaç Türlerinin Ses İletim Kaybının Deneysel Olarak Belirlenmesi

Vedat ÇAVUŞ, Murat KARA

ywords: Acidic Chemicals, Alkaline Ash Solution, Azarole, Common Hawthorn, Seed Dormancy. Crataegus monogyna (Jac.) ve Crataegus azarolus var. pontica ((K. Koch) K. I. Chr) Tohumlarının Morfolojilerinin ve Ön İşlemlerin Tohumlarının Çimlenmesi Üzerin

Aşkın GÖKTÜRK, Ferhat YILDIRIM