2018 Cilt: 4 - Sayı: 3
İÇİNDEKİLER
Darrieus vertical axis wind turbines: methodology to study the self-start capabilities considering symmetric and asymmetric airfoils
Nelson C. BATİSTA, Rui MELILIO, Victor M.F. MENDES
Preface
Andreas ÖCHSNER, Luiz A. O. ROCHA, Antonio F. MİGUEL
Properties of furfural residue and its drying characteristics in single-shaft paddle heat exchangers
Liang Jİ, Xinzhi LIU, Houlei ZHANG
The effect of time delay of fluid flow in a vascularized plate
Onur YENİGÜN, Turgay COŞKUN, Erdal ÇETKİN
Optimization applied to dynamic poroelasticity using boundary element method (BEM) and genetic algorithm (GA)
Anunciação Jr.N. C, Anflor C.T.M, Goulart J.N.V
Computational modeling and Constructal Design method applied to the geometric optimization of stiffened steel plates subjected to uniform transverse load
Marcelo Langhinrichs CUNHA, Grégori da Silva TROİNA, Elizaldo Domingues dos SANTOS, Luiz Alberto Oliveira ROCHA, Liércio André ISOLDI
Numerical study of the elasto-plastic buckling in perforated thin steel plates using the constructal design method
Daniel HELBİG, Marcelo Langhinrichs CUNHA, Caio Cesar Cardoso da SİLVA, Elizaldo Domingues dos SANTOS, Ignácio ITURRİOZ, Mauro de Vasconcellos REAL, Liércio André ISOLDI, Luiz Alberto Oliveira ROCHA
5.8b 1.4b
Arşiv
Cilt: 8 - Sayı : 1
Cilt: 8 - Sayı : 2
Cilt: 7 - Sayı : 1
Cilt: 7 - Sayı : 2
Cilt: 7 - Sayı : 3
Cilt: 7 - Sayı : 4
Cilt: 6 - Sayı : 3
Cilt: 6 - Sayı : 4
Cilt: 6 - Sayı : 1
Cilt: 6 - Sayı : 2
Cilt: 5 - Sayı : 2
Cilt: 5 - Sayı : 1
Cilt: 5 - Sayı : 3
Cilt: 5 - Sayı : 4
Cilt: 4 - Sayı : 1
Cilt: 4 - Sayı : 3
Cilt: 4 - Sayı : 4
Cilt: 4 - Sayı : 2
Cilt: 3 - Sayı : 1
Cilt: 3 - Sayı : 3
Cilt: 3 - Sayı : 2
Cilt: 2 - Sayı : 2
Cilt: 2 - Sayı : 1