___

• [1] Guo, Z. & Chang, L. FEM study on permanent magnet synchronous generators for small wind turbines, IEEE Canadian Conference on Electrical and Computer Engineering, (CCECE/CCGEI), 1-4 May 2005, Saskatoon, Canada, pp.641-644, DOI: 10.1109/CCECE.2005.1557012.
• [2] Chang, L. & Wang, Q. Application of finite element method in design of a 50kW direct drive synchronous generator for variable speed wind turbines”, IEEE Canadian Conference on Electrical and Computer Engineering. Conference Proceedings, (CCECE), 2002, Canada, pp.106-111, DOI: 10.1109/CCECE.2002.1015183.
• [3] Kurt, E. & Gor, H. Electromagnetic design of a new axial flux generator, IEEE 6th Edition Electronics, Computers and Artificial Intelligenc (ECAI 2014), 23-25 Oct. 2014, Bucharest, România, pp.39-42.
• [4] Kurt, E., Gor, H., & Doner, U. Electromagnetic design of a new axial and radial flux generator with the rotor back-irons, Int. Journal of Hydrogen Energy, 2016, 4(1), 7019-7026.
• [5] Wallace, RR., Lipo, TA., Moran, LA, & Tapiai, JA. Design and construction of a permanent magnet axial flux synchronous generator. IEEE Electric Machines and Drives Conference, 1997, USA, pp. MA1/4.1-MA1/4.3, DOI: 10.1109/IEMDC.1997.604061
• [6] Mellah, H. & Hemsas, K. Simulations analysis with comparative study of PMSG performances for small WT application by FEM, International Journal of Energy Engineering, 2013, 3(2), 55-64.
• [7] Li, H. &Chen, Z. Overview of different wind generator systems and their comparisons, IET Renewable Power Generation, 2008, 2 (2), 123-138.
• [8] Mihai, AM., Benelghali, S., Simion, AI., R. Outbib, R., & Livadaru, L. Design and FEM Analysis of five-phase permanent magnet generators for gearless small-scale wind turbines, IEEE 20th International Conference on Electrical Machines, 2012, pp.150-156, DOI: 10.1109/ICElMach.2012.6349856.
• [9] Xue, YS., Han, L., Li, H., & Xie, LD. Optimal design and comparison of different PM synchronous generator systems for wind turbines, IEEE International Conference on Electrical Machines and Systems, 2008, Wuhan, China, pp.2448-2453.
• [10] Ege, ES. The design of a transversal flux permanent magnet synchronous machine for direct driven wind turbines, (M.Sc.), Institute of Science and Technology, Istanbul Technical University, Istanbul, Turkey, 2009.
• [11] Weh, H. Transverse-flux machines in drive and generator application, Proceeding of the IEEE Symposium on Electric Power Engineering, 1995, Stockholm, Sweeden, pp. 75-80.
• [12] Shokri, M., Behjat, V., & Rostami, N. Characterization of axial flux permanent magnet generator under various geometric parameters for improved performance, Gazi University Journal of Science (GU J. Sci.), 2015, 28 (2), 285-294.
• [13] Han K. & Chen, GZ. A novel control strategy of wind turbine MPPT implementation for direct-drive PMSG wind generation imitation platform, IEEE 6th International Power Electronics and Motion Control Conference, (IPEMC), 2009, Wuhan, China, pp.2255-2259, DOI: 10.1109/IPEMC.2009.5157778.
• [14] Guler, N., Irmak, E., Gor, H., & Kurt, E., An inverter design for a new permanent magnet synchronous generator, Int. Journal of Hydrogen Energy, 2017, 4(2), 17723 -17732.
• [15] Sinha, S. & Chandel, SS. Prospects of solar photovoltaic – micro-wind-based hybrid power systems in western Himalayan state of Himachal Pradesh in India, Energy Conversion and Management, 2015, 105(15), 1340-1351.
• [16] Huner E. & Ataozden, Y. Electromagnetic design and analysis of an IPMS alternator for micro wind turbine via 3D FEA program, Kirklareli University Journal of Engineering and Science, 2016, 2, 60-73.
• [17] Balci, S. &Helvaci, O., A comparative simulation on the grounding grid system of a wind turbine with FEA software, Journal of Energy Systems, 2019, 3(4), 148-157. DOI: 10.30521/jes.6137.
• [18] Balci, S. Modeling and Analysis of Inverter Output Transformers, (M.Sc.), Institute of Science and Technology, Gazi University, Ankara, Turkey, 2010,
• [19] Balci, S. Analysis of the effect of different stator slot structures on the terminal voltage of the synchronous generators with finite element method, BEU Journal of Science and Technology, 2019, 8(3), 947-957, DOI: 10.17798/bitlisfen.518348.
• [20] Bouloukza, I., Mordjaoui, M., Kurt, E., Bal, G., & Ökmen, C. Electromagnetic design of new radial flux permanent magnet motor, Journal of Energy Systems, 2018, 2(1), 13- 27, DOI: 10.30521/jes.397836.
• [21] Shan, DT & Wang, XH. Finite element analysis of permanent magnet induction generator, Advanced Materials Research, 2012, DOI: 10.4028/www.scientific.net/AMR.614-615.1250.
• [22] Bastos JPA & Sadowski N. Electromagnetic modeling by finite element methods, Marcel Dekker Inc., New York, 2003.
• [23] Rmxprt and Maxwell help datasheets, Ansys Electronics Desktop, 2019R3. Retrieved from https://www.ansys.com/products/electronics/ansys-rmxprt
• [24] Zhang, Z., Matveev, A., Øvrebø, S., Nilssen, R., & Nysveen, A. Review of modeling methods in electromagnetic and thermal design of permanent magnet generators for wind turbines, IEEE International Conference on Clean Electrical Power (ICCEP), DOI: 10.1109/ICCEP.2011.6036340, 2011, Ischia, Italy, pp.377-382.
• [25] Duan, G., Wang, H., Guo, H., & Gu, G. Direct drive permanent magnet wind generator design and electromagnetic field finite element analysis, IEEE Transactions on Applied Superconductivity, 2010, 20 (3), 1883-1887.
• [26] Tang, RY. Modern permanent magnet machines-theory and design, Beijing: China Machinery Industry Press, 2005, 61-65.
• [27] Behjat, V. & Dehghanzadeh, AR. Experimental and 3D finite element analysis of a slotless air- cored axial flux PMSG for wind turbine application, Journal of Operation and Automation in Power Engineering, 2 (2), Summer & Fall 2014, 121-128.
• [28] Wang, T. & Wang, Q. Optimization design of a permanent magnet synchronous generator for a potential energy recovery system, IEEE Transactions on Energy Conversion, 2012, 27 (4), 856-863.
• [29] Non-Oriented Electrical Steels, M19 core material, Rertrieved from, https://www.aksteel.com/our-products/electrical-steel/non-oriented-electrical-steels
• [30] Cetinceviz, Y., Uygun, D., & Demirel, H. Multi-criterion design and 2D cosimulation model of 4 kW PM synchronous generator for standalone run-of-the-river stations, IEEE International Conference on Renewable Energy Research and Applications (ICRERA), 2015, Palermo, Italy, pp.1470-1476, DOI: 10.1109/ICRERA.2015.7418651.