Abdurrahman KARABULUT, Hakan ŞAHMAN, Bahri Şamil KORKMAZ

Investigation of Vibration Isolation for Different Types of Engine Mounts

In this study, it is aimed to reduce the vibration transmitted to the chassis by using vibration dampers in the connection between the vehicle engine and chassis. A theoretical and experimental study was examined. The vibration damper is an elastic material. In the structure of this material, spring and damping are combined with the suspension system. In this study, insulation ratios between the two were compared using new and old dampers. As the engine speed changes in the vehicles, the vibration size it produces also changes. This causes severe discomfort to the driver and passengers in the vehicle. It was observed that the vibration magnitude passing from the engine to the chassis decreased by 50%. When the old and new dampers are compared, it is seen that the vibration isolation of old dampers is very weak. Therefore, it was concluded that the appropriate damper should be selected according to the mass and operating conditions of the engine. Also, it was observed that vibration amplitude increases at low engine speeds, and vibration amplitude decreases at high engine speeds. It has been found that the new vibration damper is a better insulating material than the worn damper.

PDF

___

[1] Korkmaz İ. Araçlarda Motor Askı Sistemlerinin İncelenmesi, Yüksek Lisans Tezi. İ.T.Ü. Fen Bilimleri Enstitüsü. İstanbul. 2007.
[2] Gültekin G, Mayda M, ve Milit M. Benzin ve Dizel Motorlarda Devir Sayısının Titreşime Olan Etkisinin İncelenmesi. BEÜ Fen Bilimleri Dergisi. 2017; 6: 39-43.
[3] Coşkun G. Kauçuk Gövdeli Motor Takozunun Sonlu Elemanlar Yöntemiyle Modelleme, Simülasyon ve Testleri. Yüksek Lisans Tezi. İ.T.Ü. Fen Bilimleri Enstitüsü. İstanbul. 2004.
[4] Şengün G. Kauçuk Motor Takozlarının Yorulma Ömürleri. Yüksek Lisans Tezi. Boğaziçi Üniversitesi Fen Bilimleri Enstitüsü. İstanbul. 2005.
[5] Akmal SA, Bharathiraja G. Analysis of engine mount material for automotive vibration and noise reduction. Materials Today: Proceed- ings. 2022.
[6] Karagöz M, Tuncay B. An Engine Mount Design and Vibration Analysis. International Journal of Automotive Science And Technol- ogy. 2020; 4(3), 164-170.
[7] Herold S, Kraus R, Millitzer J, de Rue G. Vibration control of a me- dium-sized vehicle by a novel active engine mount. In Proceedings of the 4th PT PIESA Symposium, Nuremberg, Germany. 2013; 26.
[8] Santhosh S, Velmurugan V, Paramasivam V, Thanikaikarasan S. Ex- perimental investigation and comparative analysis of rubber engine mount vibration and noise characteristics. Materials Today: Proceed- ings. 2020; 21, 638-642.
[9] Mohanachari JV, Reddy DP, Rao SV, Surendra UJ, Rao GN. Anal- ysis Over Engine Mount Vibrational. Journal of Science and Tech- nology. 2017; 2(02), 28-33.
[10]Shangguan WB, Lu ZH. Experimental study and simulation of a hy- draulic engine mount with fully coupled fluid–structure interaction finite element analysis model. Computers & structures. 2004; 82(22), 1751-1771.
[11]Wu J, Shangguan WB. Dynamic optimization for vibration systems including hydraulic engine mounts. Journal of Vibration and Control. 2010; 16(11), 1577-1590.
[12]Lee DH, Hwang WS, Kim CM. Design sensitivity analysis and opti- mization of an engine mount system using an FRF-based substruc- turing method. Journal of Sound and Vibration. 2002; 255(2), 383- 397.
[13]Fakhari V, Ohadi A. Robust control of automotive engine using ac- tive engine mount. Journal of Vibration and Control. 2013; 19(7), 1024-1050.
[14]Ståhlberg W. Fatigue Life Prediction of Natural Rubber in Engine Mounts. Master's Thesis. 2018.
[15]Marzbani H, Jazar RN, Fard M. Hydraulic engine mounts: a survey. Journal of Vibration and Control, 20(10), 1439-1463, 2014.
[16]Ünlüsoy YS, Bilal H, ve Çalışkan K, Motor Destek Takozlarının Op- timizasyonu. Bursa 5. Otomotiv Teknolojileri Kongresi. Bursa. 07- 08 Haziran 2010: 253-266.
[17]Akkuş İ. Araç Motorlarının Şasiye Bağlantı Takozlarının Titreşim Sönümleme Etkisinin İncelenmesi. Yüksek Lisans Tezi. Afyon Kocatepe Üniversitesi Fen Bilimleri Enstitüsü. Afyonkarahisar. 2019.

International Journal of Automotive Science and Technology-Cover

Yayın Aralığı: Yılda 4 Sayı
Başlangıç: 2016
Yayıncı: Otomotiv Mühendisleri Derneği

Arşiv