Determining Fire Door Resistance Through Infrared Thermography

ISSN: 2147-8228
Yayın Aralığı: Yılda 4 Sayı
Başlangıç: 2013
Yayıncı: Selçuk Üniversitesi

The resistance tests of two fire doors with standard opening single were made using the methods of thermocouples and infrared thermography according to the features stated in the regulations. With the traditional fire mechanism stated in the regulation of TS EN 1634-1, a fire resistance test of 50 and 56 minutes was made. In the 32nd and 34th minutes of the experiment, opening was observed at the upper right-hand corners of standard opening single fire doors that were tested. Temperature values obtained from the measurement points stated in the regulation were controlled and with 200 thermal images that were obtained image process were applied. The utility of Infrared Thermography (IRT) method that is a contactless and distant measurement technique of temperature is shown to be used for fire tests with the traditional methods.

Keywords:

Thermal camera, image proses, fire doors fire safety,

PDF

___

[1] J. A. Capote, D. Alvear e.g.. “Assessment of Physical Phenomena Associated to Fire Doors During Standard”, Tests Fire Technology, 2012, DOI: 10.1007/s10694-012-0270-0 [2] Bennetts I.D., Moinuddin K.A.M., Gohy C.C. and Thomas I.R., “Testing and factors relevant to the evaluation of the structural adequacy of steel members within fire-resistant elevator shafts”, Fire Safety Journal 40 (2005) 698–727 [3] Kılıç A.,http://www.yangin.org/dosyalar/yangin_kapilari. pdf [4] Barreira, E. and De Freitas, V.P., (2007). “Evaluation of building materials using infrared thermography”, Construction and Building Materials"; 21; 218–224. [5] Selek, M., Sahin, Ö.S., Kahramanlı, S., 2009. “Using artificial neural networks for realtime observation of the endurance state of a steel specimen under loading”, Expert Systems with Applications 36-4, 7400-7408.