___

• Hull, D., & Clyne, T. W. (1981). An Introduction to Composite Materials, Cambridge University Press. Macmillan, New York.
• http://www.rnrmarketresearch.com/global-and-china-carbon-fiber industry-report-2014-2017-market-report.html (Erişim tarihi 15.02.2016).
• http://www.statista.com/statistics/380549/leading-countries-by-carbon-fiber-production-capacity/ (Erişim tarihi: 20.09.2016)
• Roberts, T. (2011). „The Carbon Fiber Industry worldwide 2011-2020,“. Materials Technology Publications, Watford, 6, 29.
• Warren, C. D. (2011). Low cost carbon fiber overview. Oak Ridge National Laboratory, Oak Ridge, Tennessee.
• Özsin G. (2017) Farklı Organik Atıklardan Zift Esaslı Karbon Fiber Üretimi Ve Karakterizasyonu, Doktora tezi, Eskişehir: Anadolu Üniversitesi.
• Park, S. J. (2015). Carbon fibers. Springer.
• Oya, A., & Kasahara, N. (2000). Preparation of thin carbon fibers from phenol–formaldehyde polymer micro-beads dispersed in polyethylene matrix. Carbon, 38(8), 1141-1144.
• Hulicova, D., & Oya, A. (2003). The polymer blend technique as a method for designing fine carbon materials. Carbon, 41(7), 1443-1450.
• Imel, A. E., Naskar, A. K., & Dadmun, M. D. (2016). Understanding the Impact of Poly (ethylene oxide) on the Assembly of Lignin in Solution toward Improved Carbon Fiber Production. ACS applied materials & interfaces, 8(5), 3200-3207.
• Nar, M., Rizvi, H. R., Dixon, R. A., Chen, F., Kovalcik, A., & D'Souza, N. (2016). Superior plant based carbon fibers from electrospun poly-(caffeyl alcohol) lignin. Carbon, 103, 372-383.
• Mavinkurve, A., Visser, S., & Pennings, A. J. (1995). An initial evaluation of poly (vinylacetylene) as a carbon fiber precursor. Carbon, 33(6), 757-761.
• Guo, Z., Liu, Z., Ye, L., Ge, K., & Zhao, T. (2015). The production of lignin-phenol-formaldehyde resin derived carbon fibers stabilized by BN preceramic polymer. Materials Letters, 142, 49-51.
• Bayat, N., Rezaei, M., & Meshkani, F. (2016). Hydrogen and carbon nanofibers synthesis by methane decomposition over Ni–Pd/Al 2 O 3 catalyst. International Journal of Hydrogen Energy, 41(12), 5494-5503.
• Zhang, D., & Sun, Q. (1996). Structure and properties development during the conversion of polyethylene precursors to carbon fibers. Journal of applied polymer science, 62(2), 367-373.
• Krumpfer, J. W., Giebel, E., Frank, E., Mueller, A., Ackermann, L. M., Tironi, C. N., ... & Müllen, K. (2016). Poly (methyl vinyl ketone) as a Potential Carbon Fiber Precursor. Chemistry of Materials.
• Zhang, J., Terrones, M., Park, C. R., Mukherjee, R., Monthioux, M., Koratkar, N., ... & Chen, Y. (2016). Carbon science in 2016: status, challenges and perspectives. Carbon, 98(70), 708-732.
• Inagaki, M., & Kang, F. (2014). Materials science and engineering of carbon: fundamentals. Butterworth-Heinemann
• Somiya, S. (2013). Handbook of advanced ceramics: materials, applications, processing, and properties. Academic press.
• Kelly, A., & Zweben, C. H. (2000). Comprehensive composite materials. Elsevier.
• Riggs, D. M., Shuford, R. J., & Lewis, R. W. (1982). Graphite fibers and composites. In Handbook of composites (pp. 196-271). Springer US.
• Zander, M. (1987). On the composition of pitches. Fuel, 66(11), 1536-1539.
• Almugerhıy, A.A. (1998). Preperation and Characterization of Göynük Oil Shale Derived Pitch Precursors For Production of Carbon Matarials, Doktora Tezi, İstanbul: İstanbul Teknik Üniversitesi.
• El-Akrami, H.A. (1998). Preparation and Characterization of Avgamasya Asphaltite and Raman-Dinçer Crude Oil Derived Pitches For Production of Stabilized Fiber. Doktora Tezi, İstanbul: İstanbul Teknik Üniversitesi.
• Gül, A. (2005). Mesophase Pitch Derived Graphitic Carbon Foam. Yüksek Lisans Tezi, İstanbul: İstanbul Teknik Üniversitesi.
• Özel, M. Z., & Bartle, K. D. (2002). Production of mesophase pitch from coal tar and petroleum pitches using supercritical fluid extraction. Turkish Journal of Chemistry, 26(3), 417-424.
• Brooks, J. D., & Taylor, G. H. (1965). The formation of graphitizing carbons from the liquid phase. Carbon, 3(2)
• Ekşilioğlu, A. (2004). Effect Of Temperature, Solvent Type and Additives On The Properties of Mesophase Pitch Based Carbon Foam. Yüksek Lisans Tezi, İstanbul: İstanbul Teknik Üniversitesi.
• Kim B.J. (2014). Study of Isotropic Pitch Based Carbon Fiber for Automotive Body. Doktora Tezi, Fukuoka:Kyuhu University.
• Figueiredo, J. L., Bernardo, C., Baker, R. T. K., & Hüttinger, K. J. (Eds.). (2013). Carbon fibers filaments and composites (Vol. 177). Springer Science & Business Media.
• Kumar, S., & Srivastava, M. (2015). Mesophase formation behavior in petroleum residues. Carbon Lett, 16(3), 171-182.
• Mochida, I., Korai, Y., Ku, C. H., Watanabe, F., & Sakai, Y. (2000). Chemistry of synthesis, structure, preparation and application of aromatic-derived mesophase pitch. Carbon, 38(2), 305-328.
• Marsh, H., Martı́nez-Escandell, M., & Rodrı́guez-Reinoso, F. (1999). Semicokes from pitch pyrolysis: mechanisms and kinetics. Carbon, 37(3), 363-390.
• Fitzgerald, R. L. (2000) Novel Applications of Carbon Fiber for Hot Mix Asphalt Reinforcement and Carbon-Carbon Pre-forms, Yüksek Lisans Tezi, Michigan, Michigan Technological University.
• Peebles Jr, L. H. (1995). Carbon fibers, formation, structure and properties. CRC Press, Inc, 2000 Corporate Blvd, NW, Boca Raton, FL 33431, USA, 1995. 224.
• Hamada, T., Furuyama, M., Sajiki, Y., Tomioka, T., & Endo, M. (1990). Preferred orientation of pitch precursor fibers. Journal of Materials Research, 5(06), 1271-1280.
• Yoon, S. H., Korai, Y., & Mochida, I. (1993). Spinning characteristics of mesophase pitches derived from naphthalene and methylnaphthalene with HF/BF3. Carbon, 31(6), 849-856.
• Díez, N., Álvarez, P., Santamaría, R., Blanco, C., Menéndez, R., & Granda, M. (2012). Optimisation of the melt-spinning of anthracene oil-based pitch for isotropic carbon fibre preparation. Fuel processing technology, 93(1), 99-104.
• Matsumoto, T., & Mochida, I. (1992). A structural study on oxidative stabilization of mesophase pitch fibers derived from coaltar. Carbon, 30(7), 1041-1046.
• Mochida, I., Toshima, H., Korai, Y., & Hino, T. (1989). Oxygen distribution in the mesophase pitch fibre after oxidative stabilization. Journal of materials science, 24(2), 389-394.
• Mochida, I., Toshima, H., Korai, Y., & Matsumoto, T. (1989). Control of molecular orientations in mesophase pitch-based carbon fibre by blending PVC pitch. Journal of materials science, 24(1), 57-62.
• Matsumoto, T., & Mochida, I. (1993). Oxygen distribution in oxidatively stabilized mesophase pitch fiber. Carbon, 31(1), 143-147.
• Tekinalp, H. (2011). Pitch Based Carbon Fibers: The Effect of Precursor Composition on Pore Structure. Doktora Tezi, South Carolina: Clemson University.
• Edie, D. D. (1998). The effect of processing on the structure and properties of carbon fibers. Carbon, 36(4), 345-362.
• Yang, C. Q., & Simms, J. R. (1993). Infrared spectroscopy studies of the petroleum pitch carbon fiber—I. The raw materials, the stabilization, and carbonization processes. Carbon, 31(3), 451-459.
• Wu, X., Gallego, N. C., Contescu, C. I., Tekinalp, H., Bhat, V. V., Baker, F. S., & Thies, M. C. (2008). The effect of processing conditions on microstructure of Pd-containing activated carbon fibers. Carbon, 46(1), 54-61.
• Woodhead, A. L., de Souza, M. L., & Church, J. S. (2016). An investigation into the surface heterogeneity of nitric acid oxidized carbon fiber. Applied Surface Science.
• Jung, M. J., Park, M. S., Lee, S., & Lee, Y. S. (2016). Effect of E-beam Radiation with Acid Drenching on Surface Properties of Pitch-based Carbon Fibers. Applied Chemistry for Engineering, 27(3), 319-324.
• Fukunaga, A., & Ueda, S. (2000). Anodic surface oxidation for pitch-based carbon fibers and the interfacial bond strengths in epoxy matrices. Composites science and technology, 60(2), 249-254.
• Yumitori, S., & Nakanishi, Y. (1996). Effect of anodic oxidation of coal tar pitch-based carbon fibre on adhesion in epoxy matrix: Part 1. Comparison between H2SO4 and NaOH solutions. Composites Part A: Applied Science and Manufacturing, 27(11), 1051-1058.
• Li, X., Zhu, X. Q., Okuda, K., Zhang, Z., Ashida, R., Yao, H., & Miura, K. (2017). Preparation of carbon fibers from low-molecular-weight compounds obtained from low-rank coal and biomass by solvent extraction. New Carbon Materials, 32(1), 41-47.
• Yang, J., Nakabayashi, K., Miyawaki, J., & Yoon, S. H. (2016). Preparation of isotropic pitch-based carbon fiber using hyper coal through co-carbonation with ethylene bottom oil. Journal of Industrial and Engineering Chemistry, 34, 397-404.
• Kim, M. S., Lee, D. H., Kim, C. H., Lee, Y. J., Hwang, J. Y., Yang, C. M., ... & Yang, K. S. (2015). Shell–core structured carbon fibers via melt spinning of petroleum-and wood-processing waste blends. Carbon, 85, 194-200.
• Yang, J. X., Nakabayashi, K., Miyawaki, J., & Yoon, S. H. (2017). Preparation of isotropic spinnable pitch and carbon fiber by the bromination-dehydrobromination of biotar and ethylene bottom oil mixture. Journal of materials science, 52(2), 1165-1171.
• Naskar, A. K., Akato, K. M., Tran, C. D., Paul, R. M., & Dai, X. (2017). Low cost bio-based carbon fiber for high temperature processing (No. ORNL/TM-2017/83). Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Center for Nanophase Materials Sciences (CNMS); Carbon Fiber Technology Facility (CFTF).
• Prauchner, M. J., Pasa, V., Otani, C., Otani, S., & de Menezes, S. (2004). Eucalyptus tar pitch pretreatment for carbon material processing. Journal of applied polymer science, 91(3), 1604-1611.
• Prauchner, M. J., Pasa, V. M. D., Otani, S., & Otani, C. (2005). Biopitch-based general purpose carbon fibers: Processing and properties. Carbon, 43(3), 591-597.
• Ma, X., & Zhao, G. (2011). Variations in the microstructure of carbon fibers prepared from liquefied wood during carbonization. Journal of Applied Polymer Science, 121(6), 3525-3530.
• Kim, B. J., Kotegawa, T., Eom, Y., An, J., Hong, I. P., Kato, O., ... & Yoon, S. H. (2016). Enhancing the tensile strength of isotropic pitch-based carbon fibers by improving the stabilization and carbonization properties of precursor pitch. Carbon, 99, 649-657.
• Jang, S. Y., Ko, S., Jeon, Y. P., Choi, J., Kang, N., Kim, H. C., ... & Lee, S. (2017). Evaluating the stabilization of isotropic pitch fibers for optimal tensile properties of carbon fibers. Journal of Industrial and Engineering Chemistry, 45, 316-322.
• Govorov, A., Galiguzov, A., Tikhonov, N., Malakho, A., & Rogozin, A. (2016). Study of Different Types of Carbon Fiber Oxidation Kinetics. Refractories & Industrial Ceramics, 56(6).
• Jung, M. J., Park, M. S., Lee, S., & Lee, Y. S. (2016). Effect of E-beam Radiation with Acid Drenching on Surface Properties of Pitch-based Carbon Fibers. Applied Chemistry for Engineering, 27(3), 319-324.
• Ko, S., Choi, J. E., Lee, C. W., & Jeon, Y. P. (2017). Modified oxidative thermal treatment for the preparation of isotropic pitch towards cost-competitive carbon fiber. Journal of Industrial and Engineering Chemistry.
• Yue, Z., Liu, C., & Vakili, A. (2017). Solvated mesophase pitch-based carbon fibers: thermal-oxidative stabilization of the spun fiber. Journal of Materials Science, 13(52), 8176-8187.
• Kim, J. D., Roh, J. S., & Kim, M. S. (2017). Effect of carbonization temperature on crystalline structure and properties of isotropic pitch-based carbon fiber. Carbon Lett, 21, 51-60.
• Naito, K. (2016). Effect of Hybrid Surface Modifications on Tensile Properties of Polyacrylonitrile-and Pitch-Based Carbon Fibers. Journal of Materials Engineering & Performance, 25(5).
• Bhagat, A. R., & Mahajan, P. (2016). Characterization and damage evaluation of coal tar pitch carbon matrix used in Carbon/Carbon composites. Journal of Materials Engineering and Performance, 9(25), 3904-3911.
• Lee, H. M., Kwac, L. K., An, K. H., Park, S. J., & Kim, B. J. (2016). Electrochemical behavior of pitch-based activated carbon fibers for electrochemical capacitors. Energy Conversion and Management, 125, 347-352.
• Asano, K. (2017). Thermal expansion behaviour of squeeze-cast aluminium matrix composites reinforced with PAN-and Pitch-based carbon fibres. International Journal of Cast Metals Research, 1-9.
• Martin, A., Addiego, F., Mertz, G., Bardon, J., & Ruch, D. (2016). Pitch-Based Carbon Fibre-Reinforced PEEK Composites: Optimization of Interphase Properties by Water-Based Treatments and Self-Assembly. J Material Sci Eng, 6(308), 2169-0022.
• Dong, J., Jia, C., Wang, M., Fang, X., Wei, H., Xie, H., ... & Huang, Y. (2017). Improved mechanical properties of carbon fiber-reinforced epoxy composites by growing carbon black on carbon fiber surface. Composites Science and Technology.
• Yuan, G., Li, X., Dong, Z., Xiong, X., Rand, B., Cui, Z., ... & Wang, J. (2014). Pitch-based ribbon-shaped carbon-fiber-reinforced one-dimensional carbon/carbon composites with ultrahigh thermal conductivity. Carbon, 68, 413-425.
• Noh, Y. J., & Kim, S. Y. (2015). Synergistic improvement of thermal conductivity in polymer composites filled with pitch based carbon fiber and graphene nanoplatelets. Polymer Testing, 45, 132-138.
• Mun, S. Y., Lim, H. M., & Lee, D. J. (2015). Thermal conductivity of a silicon carbide/pitch-based carbon fiber-epoxy composite. Thermochimica Acta, 619, 16-19.
• Diez, N., Díaz, P., Álvarez, P., González, Z., Granda, M., Blanco, C., ... & Menéndez, R. (2014). Activated carbon fibers prepared directly from stabilized fibers for use as electrodes in supercapacitors. Materials Letters, 136, 214-217.