___

• Chandley, G.D., “Counter Gravity Casting of
• Aluminum in Investment and Sand Molds”, AFS
• Transactions, 86-39, 209-214, 1986.
• Anon, “Turning the Gating World Upside
• Down”, Thecnical Paper, Hitchiner
• Manufacturing Co., (www.hitchiner.com),,
• (Erişim Tarihi: Kasım 2004).
• Ripkin, F. and Lipson, S., “Counter Gravity
• Casting of Aluminum Alloys in Green Sand
• Molds”, AFS Transactions, 67-70, 581-592,
• -
• Lipson, S. and Ripkin, F., “Effect of Sections
• Thickness osn The Tensile Properties of Thin-
• Section Aluminum Alloy Sand Casting”, AFS
• Transactions, 69, 192-197, 1969.
• Chandley, G.D. and Flemings, M.C., “Gating
• Premium Quality Casting”, AFS Transactions,
• -37, 121-128, 1988.
• Flemings, M.C., Conrad, H.F.and Taylor, H.F.,
• “Aluminum Alloys Fluidity Test”, AFS
• Transactions, 93-59, 496-507, 1993.
• Katzarov, I.H. and others, “Porosity Formation in
• Axi-symetric Castings Produced by Counter-
• Pressure Casting Method”, International
• Journal of Heat and Mass Transfer, Vol 44,
• -119, 2001.
• Stefanescu, D.M. and others, “In Situ Resource
• Utilization for Processing of Metal Alloys on Lunar
• and Mars Bases”, www.
• science.nasa.gov/newhome/ headlines/
• space98pdf/insitu.pdf,, (Erişim Tarihi: Kasım 2004).
• Chandley, G.D., “Use of Vacuum for Counter
• Gravity Casting of Metals”, Materals Res.
• Innovant, 14-23, 1999.
• Chandley, G.D., “Making casting without ladles
• or sprues – the CLA process”, AFS
• Transactions, 76-28, 37-42, 1976.
• Campbell, J., “Reliable Castings Suppluy –a
• report”, www.wmrc.com/businessbriefing/pdf /
• auto2001/book/campbell.pdf, (Erişim Tarihi:
• Kasım 2004).
• Chendley, D. and others, “Development of Thin-
• Wall Stanless Steel Castings Using
• Countergravity Process for Automobile
• Application”, AFS Transactions, 96-82, 903-
• , 1996.
• Bakhtiyarov, S.I. and others, “Advances in
• Countergravity Lost Foam Casting Process”,
• AFS Transactions, 00-49, 137-145, 2000.
• Westendorf, T.M. and others, “Countergravity
• Casting of Thin-Wall Al A356, Part I: A
• Castability Study” ,AFS Transactions, 98-100,
• -562, 1998.
• Shenefelt, J.R. and others, “Countergravity
• Casting of Thin-Wall Al A356, Part II: Result of
• Casting Characterization Studies”, AFS
• Transactions, 98-101, 563-566, 1998.
• Chandley, G.D., “Automatic Counter Gravity
• Casting of Shell Molds”, AFS Transactions, 83-
• , 199-204, 1983.
• Anon, Metal casting and molding process,
• American Foundryman’s Society publications,
• Illinois, USA, 1981.
• Jiang Q.C., Xu C.L., Lu M. and Wang H.Y.,
• “Effect of new Al-P-Ti-TiC-Y modifier on
• primary silicon in hypereutectic Al-Si alloys”,
• Materials Letters, Vol 59, 624-628, 2005.
• Meriç C., Atik E. and Kaçar H., “Effect of aging
• on the abrasive wear properties of AlMgSi1 alloy”,
• Materials and Design, 2005, (Article in press -
• Short Cominication: www.sciencedirect.com)
• (Erişim tarihi: 03.04.2005).
• Yılmaz O. and Buytoz S., “Abrasive wear of
• Al2O3 – reinforced aluminum – based MMCs”,
• Composites Science and Technology, Vol 61,
• -2392, 2001.
• Kim S.W., Lee U.J., Han S.W., Kim D.K. and
• Ogi K., “Heat treatment and wear charecteristics
• of Al/SiCp composites fabricated by dublex
• process”, Composites Part B: engineering, Vol
• , p: 737-745, 2003.
• Sawla S., Das S., “Combinet effect of
• reinforcement and heat treatment on the two body
• abrasive wear of aluminum alloy and aluminum
• particle composites”, Wear, Vol 257, 555-561,
• -
• Lasa L. and Rodriguez-Ibabe J.M., ‘Effect of
• composition and processing route on the wear
• behaviour of Al-Si alloys’, Scripta Materialia,
• Vol 46, 477-481, 2002.
• Sun Y., Baydoğan M. and Çimenoğlu H., ‘The
• effect of deformation before ageing on the wear
• resistance of an aluminum alloy’, Materials
• Letters, Vol 38, 221-226, 1999.