___

• Hannemann R., Thermal control of electronics: Perspectives and prospects, Rohsenow Symposium on Future Trends in Heat Transfer. Massachusetts Institute of Technol, 2003.
• Şahin B., Demir A., Thermal performance analysis and optimum design parameters of heat exhanger having perforated pin fins. Energy Conversion and Management 49: 1684-1695, 2008.
• Park K., Moon S., Optimal design of heat exchangers using the progressive quadratic response surface model. Int J Heat and Mass Transf 42: 237-244, 2000.
• Park K., Choi DH., Lee KS., Optimum design of plate heat exchanger with staggered pin arrays. Numerical Heat Transf Part A 45: 347–361, 2004.
• Park K., Choi DH., Lee KS., Numerical shape optimization for high performance of a heat sink with pin-fins. Numerical Heat Transf Part A 46: 909-927, 2004.
• Karagoz S., Investigation of thermal performances of “S-shaped” enhancement elements by response surface methodology. Heat and Mass Transf 51(2): 251-263, 2015.
• Webb RL., Principles of Enhanced Heat Transfer. New York, John Wiley &Sons, Inc., 1994.
• Bergles AE., Heat transfer enhancement-the encouragement and accommodation of high heat fluxes. J Heat Transf, ASME 119: 8-19, 1997.
• Jubran BA., Al-Salaymeh AS., Heat transfer enhancement in electronic modules using ribs and ‘‘film-cooling-like’’ techniques. Int J Heat Fluid Flow 17(2): 148-154, 1996.
• Tahat M., Kodah ZH., Jarrah BA., Probert SD., Heat transfers from pin-fin arrays experiencing forced convection. Appl Energy 67(4): 419-442, 2000.
• El-Sayed SA., Mohamed MS., Abdel-latif AM., Abouda AE., Investigation of turbulent heat transfer and fluid flow in longitudinal rectangular-fin arrays of different geometries and shrouded fin array. Exp Therm Fluid Sci 26: 879-900, 2002.
• Park K., Choi DH., Lee KS., Optimum design of plate heat exchanger with staggered pin arrays, Numer. Heat Transf Part A 45: 347-361, 2004.
• Park K., Choi DH., Shape optimization of a plate-fin type heat sink with triangular-shaped vortex generator. KSME Int J 18(9): 867-876, 2004.
• Park K., Moon S., Optimal design of heat exchangers using the progressive quadratic response surface model. Int J Heat and Mass Transf 48: 2126-2139, 2005.
• Chiang KT., Modeling and optimization of designing parameters for a parallel-plain fin heat sink with confined impinging jet using the response surface methodology. Appl Therm Eng 27: 2473-2482, 2007.
• Chiang KT., Chou CC., Liu NM., Application of response surface methodology in describing the thermal performances of a pin-fin heat sink. Int J Therm Sci 48: 1196-1205, 2009.
• Sara ON., Pekdemir T., Yapici S., Yilmaz M., Heat-transfer enhancement in a channel flow with perforated rectangular blocks. International J Heat and Fluid Flow 22: 509-518, 2001.
• Rodriguez JF., Renaud JE., Wujek BA., Tappeta RV., Trust region model management in multidisciplinary design optimization. J Comput Appl Math 124: 139-154, 2000.
• Madsen JI., Langyhjem M., Multifidelity response surface approximations for the optimum design of diffuser flows. Optim Eng 2: 453-468, 2001.
• Kansal HK., Singh S., Kumar P., Parametric optimization of powder mixed electrical discharge machining by response surface methodology. J Materials Processing Technol 169: 427-436, 2005.
• Naceur H., Ben-Elechi S., Batoz JL., Knopf-lenoir C., Response surface methodology for the rapid design of aluminum sheet metal forming parameters. Materials & Design 29(4): 781-790, 2007.
• Choorit W., Pattthanamanee W., Manurakchinakorn S., Use of response surface method for the determination of demineralization efficiency in fermented shrimp shells. Bioresource Technol 99(14): 6168-6173, 2008.
• Xiarchos I., Jaworska A., Traznadel GZ., Response surface methodology for the modeling of copper removal from aqueous solutions using micellarenhanced ultrafiltration. J Membrane Sci 321(2): 222-231, 2008.
• Acherjee B., Misra D., Bose D., Venkadeshwaran K., Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology. Optics & Laser Technol 41(8): 956-967, 2009.
• Wang G., Zhao G., Li H., Guan Y., Research on optimization design of the heating/cooling channels for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization. Expert Systems with Applications 38: 6705-6719, 2011.
• Khalajzadeh V., Heidarinejad G., Srebric J., Parameters optimization of a vertical ground heat exchanger based on response surface methodology. Energy and Buildings 43: 1288-1294, 2011.
• Subaşı A., Heat exchanger optimization with the helping of response surface method. MS Thesis (in Turkish). Mechanical Engineering Department, Ataturk University, Turkey, 2010.
• Sahin B., Demir A., Performance analysis of a heat exchanger having perforated square fins. Appl Therm Eng 28: 621-632, 2008.
• Box G., Wilson K., On the experimental attainment of optimum condition. J the Royal Statistical Society: Series B 13(1): 1-45, 1951.
• Montgomery DC., Design and Analysis of Experiments, Fourth ed., Wiley, New York, 1997.
• Myers RH., Montgomery DH., Response surface methodology: process and product optimization using designed experiments, John Wiley & Sons, New York, 1995.
• Chen TY., Shu TH., Flow structures and heat transfer characteristics in fan flows with and without delta-wing vortex generators. Exp Therm Fluid Sci 28(4): 273-282, 2004.
• Bilen K., Akyol U., Yapici S., Thermal performans analysis of a tube finned surface. Int J Energy Res 26: 321-333, 2002.
• Ozisik MN., Heat Transfer – A Basic Approach. McGraw-Hill Int Ed. p. 338, 1985.
• Şara ON., Yapıcı S., Yılmaz M., Pekdemir T., Second law analysis of rectangular channels with square pin-fins. Int Comm Heat Mass Transf 28(5): 617-630, 2001.
• Yeşildal F., Experimental and theoretical analysis of heat and flow characteristics in rectangular and hexagonal heat sinks. MS Thesis (in Turkish). Mechanical Engineering Department, Ataturk University, Turkey, 2007.
• Yıldız N., Investigation of heat and flow characteristic with impingement jet for optimized hexagonal finned heat sinks, MS Thesis (in Turkish). Mechanical Engineering Department, Ataturk University, Turkey, 2012.
• Demir A., Determination of optimum design parameters of a finned heat exchanger, MS Thesis (in Turkish). Mechanical Engineering Department, Ataturk University, Turkey, 2006.
• Kline S.J., McClintock F.A., Describing uncertainties in single sample experiments, Mech. Eng. 75: 3-8, 1953.
• Subaşı A., Şahin B., Kaymaz İ., Metalik bal peteği yapıların ısı ve akış özelliklerinin araştırılması, s. 355-360, 18. Ulusal Isı Bilimi ve Tekniği Kongresi, Zonguldak, Eylül 2011.
• Şahin B., Bazarbashi M., Manay E., Abdussamet Subaşı A., S tipi kanatların ısı transferi performansının Yanıt Yüzey Yöntemi ile tahmin edilmesi, s. 801-806, 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Eylül 2013.
• Subaşı A., Şahin B., Kaymaz İ., Multi-objective optimization of a honeycomb heat sink using Response Surface Method, Int J Heat and Mass Transf 101: 295-302, 2016.
• Subaşı A., İzgi B., Şahin B., Kaymaz İ., Yanıt yüzey yöntemi ile taguchi yöntemi arasındaki farkların bir ısı değiştiriciye ait optimizasyon problemi üzerinden tartışılması, s. 244-250, 18. Ulusal Isı Bilimi ve Tekniği Kongresi, Zonguldak, Eylül 2011.
• Subaşı A., İzgi B., Şahin B., Kaymaz İ., Delikli silindirik kanatlara sahip bir ısı alıcının optimum tasarım parametrelerinin yanıt yüzey yöntemi yardımıyla belirlenmesi, s. 265-274, Anadolu Enerji Sempozyumu, Elazığ, Haziran 2011.
• Gholami A., Wahid MA., Mohammed HA., Thermal–hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns. Int J Heat and Mass Transf 106: 573-592, 2017.