___

• Karabay, S., Önder, F.K., "An Approachfor
• Analysis in Refurbishment of
• ExistingConventional HV-ACSR
• TransmissionLines with AAAC", Electric Power
• System Research, Cilt: 72, Sayı: 2, 179-
• ,2004.
• Gandhi, B. K., Borse S. V.,"Nominal particle size
• of multi-sized particulate slurries for evaluation
• of erosion wear and effect of fine particles,
• Wear, Cilt: 257,Sayı:1-2, 73-79, 2004.
• Sınmazçelik, T., Sarı, N.,"Erodent size effect on
• the erosion of polyphenylene sulfide composite",
• Polymer Composites, Cilt: 31, Sayı:6, 985-994,
• -
• American Society for Metals, Friction,
• Lubrication and Wear Technology, 18, (ASM
• handbook), ASM International, 1992.
• Curkovic, L., Kumic, I., Kresimir, G., "Solid
• particle erosion behavior of high purity alumina
• ceramics", Ceramics International, Cilt: 37,
• Sayı:1, 29-35, 2011.
• Harsh, A. P., Thakre, A. A., "Investigation on
• solid particle erosion behavior of polyetherimide
• and its composites", Wear, cilt: 262, Sayı: 7-8,
• -818, 2007.
• Tewari, U. S., Harsha, A. M., Hager, A.M.,
• Friedrich, K., "Solid particle erosion of carbon
• fibre-and glass fibre-epoxy composites", Wear,
• Cilt: 63, Sayı: 3-4, 549-557, 2003.
• Rajesh, J. J., Bijwe, J., Tewari, U. S.,
• Vankataraman, B., "Erosive wear behavior of
• various polyamides", Wear, Cilt: 249, Sayı: 8,
• -714, 2001.
• Bhushan, B., Introduction to Tribology, John
• Wiley and Sons, New York, USA, 2002.
• Sınmazçelik, T., Fidan,S., Günay, V.,"Residual
• mechanical properties of carbon/polyphenylene
• composites after solid particle erosion",
• Materials & Design, Cilt: 29,Sayı: 7, 1419-1426,
• -
• Sınmazçelik, T., Taşkıran, İ. (2007), "Erosive
• wear behavior of polyphenylenesulphide (PPS)",
• Materials & Design, Cilt: 28, Sayı: 9, 2471-
• , 2007.
• Zhou, J., Bahadur, S., "Erosion-corosion of
• Ti6Al4V in elevated temperature air
• environment", Wear, Cilt: 186-187,Sayı: 1,332-
• , 1995.
• Srivastava, V. K., Pawar, A. G., "Solid particle
• erosion of glass fibre reinforced flyash filled
• epoxy resin composites", Composites Science
• and Technology, Cilt: 66, Sayı: 15, 3021-3028,
• -
• Wensink, H., Elwenspoek, M. C., "A closer look
• at the ductile-brittle transition in solid particle
• erosion", Wear, Cilt: 253, Sayı: 9-10, 1035-1043,
• -
• Harsha, A. P., Bhaskar, D. P. (2008), "Solid
• particle erosion behavior of ferrous and nonferrous
• materials and correlation of erosion data
• with erosion models", Materials & Design, Cilt:
• , Sayı: 9, 1745-1754, 2008.
• Oka, Y. I., Ohnogi, H., Hosokawa, T.,
• Matsumura, M., "Impact angle dependence of
• erosion damage caused by solid particle impact",
• Wear, Cilt: 203-204, 573-579, 1997.
• Molinari, J. F., Ortiz, M., "A study of solidparticle
• erosion of metallic targets",
• International Journal of Impact Engineering,
• Cilt: 27, Sayı: 4, 347-358, 2002.
• Oka, Y. I., Mihara, S., Yoshida, T., "Impact-angle
• dependence and estimation of erosion damage to
• ceramic materials caused by solid particle
• impact", Wear, Cilt: 267, Sayı: 1-2, 129-135,
• -
• Fang, C.-K., Chuang, T.H., “The effect of
• humidity on the erosive wear of 6063 Al alloy”,
• Wear, Cilt: 236, 144-152,1999.
• Ramesh, C.S., Keshavamurthy, R.,
• Channabasappa, B.H., Pramod, S., “Influence of
• heat treatment on slurry erosive wear resistance
• of Al6061 alloy” Materials and Design, Cilt: 30,
• -3722, 2009.
• Tu, J.P., Pan, J. Matsumura, M., Fukunaga, H.,
• “The solid particle erosion behaviour of
• Al18B4O33 whisker-reinforced AC4C al alloy
• matrix composites”, Wear, Cilt: 223, 22-30,
• -
• Desale, G. R., Gandhi, B. K., Jain, S. C., “Particle
• size effects on the slurry ersion of aluminium
• alloy (AA 6063), Wear, Cilt: 266, 1066-1071,
• -
• Das, S., Mondal, D. P., Sawla, S., “Solid particle
• erosion of Al alloy and Al-alloy composites:
• Effects of heat treatment and angle of
• impingement” Metallurgical and Materials
• Transactions A, Cilt: 35A, 1369-1379, 2004.
• Cousens, A. K., Hutchings, I. M., “A critical
• study of the erosion of an aluminium alloy by
• solid spherical particles at normal impingement”
• Wear, Cilt: 88, 335-348, 1983.
• Alcan Aluminium Africa and Middle East Ltd.,
• Aluminium alloy tables (7th edition), Alcan,
• -
• Sahin, Y., Durak, O., Abrasive wear behavior of
• austempered ductile iron, Materials & Design,
• Cilt: 28, Sayı: 6, 1844-1850, 2007.