___

• Gibson, L.J., Ashby, M.F., ‘‘Cellular solids, structure and properties (2nd)’’, Cambridge University Press, Cambridge (1997).
• Çinici, H., “ Toz Toz Metalurjisi Yöntemi İle Al Esaslı Parçacık Takviyeli Sandviç Metalik Köpük Üretimi Ve Mekanik Özelliklerinin Araştırılması” Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 43-44 (2012).
• Banhart, J., “Properties and applications for cast aluminium sponges”, Adv. Eng. Mat., 2: 168 (2000).
• Evans, A.G., Hutchinson, J.W., Ashby, M.F., ‘‘Multifunctionality of cellular metal systems’’, Prog. Mater. Sci., 43, 171-221, (1999).
• Andrews, E.W., Gioux, G., Onck, P., Gibson, L.J., ‘‘Size effects in ductile cellular solids. Part II: experimental results’’, Int. J. Mech. Sci., 43, 701-713, (2001).
• Paul, A., Ramamurty, U., ‘‘Strain rate sensitivity of a closed-cell aluminum foam’’, Mater. Sci. Eng. A, 281, 1-7, (2000).
• Paul, A., Seshachryulu, T., Ramaurty, U., ‘‘Tensile strength of a closed-cell al foam in the presence of notches and holes’’, Scripta Mater., 40, 809-814, (1999).
• Olurin, O.B., Fleck, F.A., Ashby, M.F.,‘‘ Indentation resistance of an aluminum foam’’, Scripta Mater., 43 983–989 (2000).
• Destefanis, R., Schafer, F., Lambert, M., Faraud, M., Schneider, E., “Enhanced Space Debris Shields for Manned Spacecraft”, International Journal of Impact Engineering 29, 215-226 (2003).
• Zhu, F., Zhao, L., Lu, G., Gad, E., “A numerical simulation of the blast impact of square metallic sandwich panels”, International Journal of Impact Engineering 36, 687-699 (2009).
• Hou, W., Zhu, F., Lu, G., Fang, D., “Ballistic impact experiments of metallic sandwich panels with aluminum foam core”, International Journal of Impact Engineering 37, 1045-1055 (2010).
• Kádár, Cs., Maire, E., Borbély, A., Peix, G., Lendvai, J., Rajkovits, Zs.,‘‘ X-ray tomography and finite element simulation of the indentation behavior of metal foams’’, Materials Science and Engineering A, 387–389, 321–325 (2004).
• Ramachandra, S., Sudheer, P., Ramamurty, U., ‘‘Impact energy absorption in an Al foam at low velocities’’, Scripta Materialia, 49, 741–745, (2003).
• Li, Q.M., Maharaj, R.N., Reid, S.R., ‘‘Penetration resistance of aluminum foam’’, International Journal of Vehicle Design, 37 (2/3), 175–183, (2005).
• Lua, G., Shena, J., Houa, W., Ruana, D., Ong, L.S., ‘‘Dynamic indentation and penetration of aluminium foams’’, International Journal of Mechanical Sciences, 50, 932–943 (2008).
• Sudheer Kumar, P., Ramachandra, S., Ramamurty, U., ‘‘Effect of displacement-rate on the indentation behavior of an aluminum foam’’, Materials Science and Engineering A, 347, 330-337, (2003).
• Peroni, M., Solomons, G., Pizzinato, V., “Impact behavior testing of aluminium foam”, International Journal of Impact Engineering 53, 74-83 (2013).
• Gökmen, U., Türker, M., “Al2O3 İlavesinin Alüminyum Ve Alumix 231 Esaslı Metalik Köpüğün Köpürme Özelliklerine Etkisi”, Journal of the Faculty of Engineering and Architecture of Gazi University Vol 27, No 3, 651-658, (2012).
• Uzun, A., Gökmen, U., Türker, M.,‘‘Toz Metalurjisi Yöntemi İle Üretilen Alüminyum Esaslı Metalik Köpükte Si İlavesinin Köpürmeye Etkisi’’, 5th International Advanced Technologies Symposium (IATS’09), 1003-1006, Karabük, Turkey, 2009.
• http://www.instron.com/wa/library/StreamFile.aspx?doc=851
• Yu, C.J., Eifert, H., Baumeister, J., Banhart, J., “Metal foaming by a powder metallurgy method: production, properties and applications”, Mat. Res. Innovat, 2: 181-188 (1998).
• Kennedy, A.R., “The effect of TiH2 heat treatment on gas relase and foaming in Al-TiH2 preforms”, Scripta Materialia, 47: 763-767 (2002).
• Mohan, K., Yip, T.H., Sridhar, I., Seow, H. P., “Effect of face sheet material on the indentation response of metallic foams”, J Mater Sci., 42:3714–3723, (2007).
• Shaw, M.C., Sata, T.,‘‘The plastic behavior of cellular materials’’, Int. J. Mech. Sci. 8, 469-472, (1966).