___

• Fortuna, D., “Sanitaryware”, Gruppo Editoriale
• Faenza Editrice S.P.A., 55-61, 2000.
• Bernardin, A. M. and Darlei Souza de Medeiros,
• Riella, H.G., “Pyroplasticity in porcelain tiles,
• Materials Science and Engineering,A 427, 316-
• , 2006.
• Miura, M., Shimadzu, T., Shin, H., Ishida, E.H.,
• “Evaluation of softening deformation behaviour
• in porcelain bodies during firing”, Ceram. Eng.
• Sci. Proc., 20, 2, 1999.
• Pagani, A., Franceskon, F., Pavese, A., Diella,
• V.,“Sanitary-ware vitreous body characterization
• method by optical microscopy, elemental maps,
• image processing and X-ray powder diffraction,
• J.Eur.Ceram.Soc,30, 6, 1267-1275, 2010.
• Rambaldi, E., Carty W.M., Tucci A. and Esposito
• L., “Using waste glass as a partial flux
• substitution and pyroplastic deformation of a
• porcelain stoneware tile body”, Ceramics
• International, 33, 727–733, 2007.
• Bragança, S.R., Bergmann, C.P., Hübner, H.,
• “Effect of quartz particle size on the strength of
• triaxial porcelain”, J. Eur. Ceram. Soc.,26,
• –3768, 2006.
• Stathis G., Ekonomakou, A., Stournaras, C.J.,
• Ftikos, C., “Effect of firing conditions, filler grain
• size and quartz content on bending strength and
• physical properties of sanitaryware porcelain, J.
• Eur.Ceram. Soc., 24, 2357-2366, 2004.
• Kingery, W.D. “Introduction to ceramics”, John
• Wiley & Sons, 1960.
• Kivitz, E., Palm, B., Heinrich, J.G., Blumm, J.,
• Kolb, G., “Reduction of the porcelain firing
• temperature by preparation of the raw materials”,
• J.Eur.Ceram. Soc., 29, 2691-2696, 2009.
• Dağ, P., “Sağlık porseleninde kompozisyon
• değişimlerinin sinterleme üzerine etkileri”,
• Yüksek Lisans Tezi, Anadolu Üniversitesi Fen
• Bilimleri Enstitüsü, Seramik Mühendisliği
• Anabilim Dalı, 2009.
• Raimando M., Zanelli C., Guarini G., Dondi M.,
• Fabbroni R., Cortesi T., “Process of Pyroplastic
• Shaping for Special-Purpose Porcelain Stoneware
• Tiles”, Ceramics International, 35, 1975-1984,
• -
• http://www.h-and-manalytical.
• com/pdfs/standards.pdf
• Milne, S.J., Patel, M., and Dickinson, E.,
• Experimental studies of particle packing and
• sintering behaviour of monosize and bimodal
• spherical silica powders, J. Eur. Ceram. Soc.,
• , 1-7, 1993.
• German, R.M., Suri, P., and Park, S.J., “Review
• liquid phase sintering”, J. Mater. Sci, 44, 1-39,
• -
• Sanchez, E., Garcia-Ten, J., Sanz, V., Moreno,
• A., Porcelain tile: Almost 30 years of stady
• scientific-technological evoluation, Ceramics
• International, 36, 3, 831-845, 2010.
• Amoros, J.L., Orts, M.J., Garcia, J., Gozalbo, A.,
• Sanchez, E., Effect of green porous texture on
• porcelain tile properties, J.Eur. Ceram. Soc., 27,
• -2301, 2007.
• Rambaldi, E., Carty, W.M., Tucci, A., Esposito,
• L., Using waste glass as a partial flux substitution
• and pyroplastic deformation of porcelain
• stoneware tile body, Ceramics International,
• , 727-733, 2007.
• Paganelli, M., Using Optical Dilatometer,
• American Ceramic Society Bulletin, Vol. 81,
• No. 11, 25-30, 2002