___

• Prasad, B.K., Patvardan, A.K. ve Yegneswaran,
• A.H., Wear, 199, 142, 1996.
• Donomoto, T., Funatari, K. ve Miura, N.,
• “Ceramic fibre reinforced piston for high
• performance diesel engines”, SAE Tecnical
• Papers, 83052, 1983.
• Taya, M. ve Arsenault R.J. (ED.),
• Thermomechanical Behaviour of Metal
• Matrix Composites, Pergamon, Oxford,
• England, 23, 1989.
• Dinwoodie, J., “Automotive applications for
• MMCs based onshort staple alumina fibres”,
• SAE Technical Papers-International Congress
• Exhibition, Detroit, Michigan, 23, 1987.
• Gervais, E., Levert, H. ve Bess, M., “The
• development of a family of zinc-base foundry
• alloys”, AFS Trans., 88, 183, 1980.
• Gervais, E., Barnhurst, R.J. ve Loong, C.A., “An
• analysis of selected properties of ZA alloys”, J.
• Metals, 43, 1985.
• Pekwah, P.L., Savaşkan, T. ve Laufer, E., “Wear
• resistance and microstructure of Zn-Al-Si and
• Zn-Al-Cu alloys”, Wear, 117, 79, 1987.
• Alpas, A.T. ve Zhang, J., “Effect of SiC
• particulate reinforcement on the dry sliding wear
• of aluminium-silicon alloys”, Wear, 155, 83-104,
• -
• Prasad, S.V. ve Rohatgi, P.K., “Tribological
• properties of Al alloy particle composites”, J.
• Metals, 39(11), 22-26, 1987.
• Wang, A. ve Rack, H.J., “Abrasive wear of
• silicon carbide particulate and whiskers
• reinforced 7091 aluminium matrix composites”,
• Wear, 147, 355-374, 1991.
• Saka, N. ve Karelakas, D.P., Wear of Materials,
• American Society of Mechanical Engineer, New
• York, 784-793, 1985.
• Alpas, A.T. ve Embury, J.D., “Sliding and
• abrasive wear behaviour of an aluminium-SiC
• particle reinforced composite”, Scripta
• Metallurgica, 24, 931-935, 1990.
• Hoskings, F.M., Folgarprtillo, F., Wunderlin, R.,
• ve Mehribian, R., “Composites of aluminium
• alloys: fabrication and wear behaviour”, Journal
• of Materials Science, 17, 477-498, 1982.
• Milliere, C. ve Surey, M., Materials Science and
• Technology, 4(1), 41-51, 1988.
• Hutchings, I.M., “Tribological properties of metal
• matrix composites”, Material Science and
• Technology, 10, 513-517, 1994.
• Elmori, S., Boukhili, R., San Marchi, C.,
• Mortensen, A. ve Lloyd, D.J., “Thermal
• Expansion Responses of Pressure Infiltrated
• SiC/Al Metal Matrix Composites”, Journal of
• Material Science, Cilt 32, 2131-2140, 1997.
• Barnhurst, R.J., “Guidelines for Designing Zinc
• Alloy Bearings–A Technical Manual”, Society of
• Automotive Engineers, No 88028, 151-161,
• -
• Murphy, S. ve Savaşkan, T., “Comparative Wear
• Behaviour of Zn–Al-Based Alloys in an
• Automotive Engine Application”, Wear, 98, 151-
• , 1984.
• Calayag, T.S., “The Practicality of Using Zinc-
• Aluminum Alloys for Friction-Type Bearings”,
• th. CIM. Conf. of Metallurgists, Toronto,
• Intnl. Symp. On Zinc-Aluminum (ZA) Casting
• Alloys, 305-312, 1986.
• Calayag, T. ve Ferres, D., “High Performance,
• High Aluminum Zinc Alloys for Low Speed
• Bearings and Bushings”, SAE Annual
• Conference, No 820643, 2242-2251, 1983.
• Barnhurst, R.J., Zinc-Aluminum Alloy Design
• Manual for Continous Rotating Bearings,
• Noranda Sales Corporation Ltd., Toronto, 1988.
• Altorfer, K.J., “Zinc Alloys Compete with
• Bronze in Bearings and Bushings”, Metal
• Progress, 29-31, 1982.
• Prasad, B.K., “Effect of Silicon Addition and
• Test Parameters on Sliding Wear Characteristics
• of Zinc – Based Alloy Containing 37.5%
• Aluminum”, Materials Transactions, 38, 701-
• , 1997.
• Prasad, B.K., Patwardhan, A.K., ve
• Yegneswaran, A.H., “Dry Sliding Wear Response
• of a Modified Zinc – Based Alloy”, Materials
• Transactions, 38, 197-204, 1997.
• Prasad, B.K., “Influence of Heat Treatment on
• the Physical, Mechanical and Tribological
• Properties of a Zinc – Based Alloy”, Z.
• Metallkunde., 87, 226-232, 1996.
• Goldak, G.R ve Parr, J.G., J. Inst. Metals, Cilt
• , 230, 1964.
• Saffil Alumina Fibre; Applications in Metal
• Matrix Composites, I.C.I. Publication, 1982.
• Wang, A. ve Rack, H.J., “Abrasive wear of
• silicon carbide particulate- and whiskerreinforced
• aluminium matrix composites”,
• Wear, 146, 337-348, 1991.
• Zhang, Z.F., Zhang, L.C. ve Mai,Y.W., “Wear
• and abrasion of cast Al-alumina particle
• composites”, Journal of Materials Science, 30,
• -1966,1995.
• Wang, A.G. ve Hutchings, I.M., “Wear of
• alumina fibre-aluminium metal matrix
• composites by two body abrasion”, Materials
• Science and Technology, 5, 71-76, 1989.
• Akbulut, H., Alümina Fiber Takviyeli Al-Si
• Metal Matriks Kompozitlerin Üretimi ve
• Mikroyapı-Özellik İlişkilerinin İncelenmesi,
• Doktora Tezi, İTÜ, İstanbul, 1994.
• Jiang, Y.N., Ma, Z.Y., Li, S.Z., Li, S., ve Bi, J.,
• “Effect of particle size on wear behaviour of SiC
• particulate-reinforced aluminium composites”,
• Journal of Materials Science Letters, 14, 114-
• , 1995.
• Chung, S. ve Hwang, B.H., “A microstructural
• study of the wear behaviour of SiCp/Al
• composites”, Tribology International, 27, 307-
• , 1994.
• Lo, S.H.J., Dionne, S., Sahoo, M. ve Hawthorne,
• H.M., J. Mater. Sci., 27, 5681, 1992.
• Lee, C.S., Kim, Y.H., Han, K.S. ve Lim, T., J.
• Mater. Sci., 27, 793, 1992.
• Arıkan, R. ve Murphy, S., Wear, 143, 149, 1991.
• Yu, S., He, Z. ve Chen, K., Wear, 198, 108,
• -
• Akbulut, H., Durman, M. ve Yılmaz, F., Wear,
• , 170, 1998.